Тёмный

Foam Crafting a Predator Mask 

Much Props
Подписаться 51 тыс.
Просмотров 15 тыс.
50% 1

After tackling a couple of postponed builds, I figured it was about time to knock the dust off this Predator mask and finish it up. It has been sitting for about 6 months and I got some modifications made to it to finish. For this build, I used: 6 mm, 4 mm, and 2 mm EVA foam, 20 mm EVA half dowels, 15 mm and 10 mm EVA triangle dowels, LEDs, LED eye kit with battery, contact cement, super glue, Plasti Dip, spray paint, rub-n-buff, and some Plaid FX acrylic paints. You may also need the following tools: a heat gun, a Dremel with various bits, and an Exacto knife or box cutter. Let me know in the comments below if you would like to see more like this one, from shows, video games, or whatever. Please smack that like button, dropkick subscribe, and share with as many people as possible.
AMAZON AFFILIATE LINK
This link brings you to my Amazon shop page, a portion of your purchase through this link helps out my channel. I have put some of the products and tools that I use in my videos on here, hopefully, this makes it easier for you to buy similar materials for your builds:
www.amazon.com...
LED Eye inserts
www.amazon.com...
MUCH PROPS MERCH
Show your support for the channel and get your Much Props gear today. Your purchase helps me to continue putting out content:
teespring.com/stores/much-props-merch
You can follow me on the following social media sites to get updates on projects I am working on:
PATREON
/ muchpropsstudios
FACEBOOK
/ much.props​​
INSTAGRAM
/ muchprops​​
TWITTER
/ muchpropsstudio​​
TIKTOK
/ muchprops​
ETSY
www.etsy.com/s...
TEMPLATE
static1.square...

Хобби

Опубликовано:

 

5 окт 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 110   
@badgolffilmedwell6047
@badgolffilmedwell6047 2 года назад
Excellent build!! Backer rod is an inexpensive "dread lock" either raw or wrapped in fluffy yarn - found in big box home improvement stores. Could even attempt to mount on a foam skull cap to make it wearable. Thank you Thomas!! I will be undertaking this prop challenge! 👍👍
@MuchProps
@MuchProps 2 года назад
Thanks for the tip. I locked at a couple options and most seemed a bit much. And once I looked at what people were charging to make the legit ones, it was a hard pass
@TheMalfestor
@TheMalfestor 2 года назад
I came over to the comments suggest the backer rods myself You beat me to it by a few months. LOL 100' of the foam cylinders are about $12 on Amazon. Mr. Thomas, thank you for the awesome build and pattern.
@Tonymoraes12
@Tonymoraes12 2 года назад
Excellent.
@MuchProps
@MuchProps 2 года назад
Thanks
@matthendin
@matthendin 2 года назад
new look studio looks good man 👍👍👊👊👊👊
@MuchProps
@MuchProps 2 года назад
Thanks. I like to change it up ever so often. Still have some things to add to it but it's coming along.
@leolemaire1870
@leolemaire1870 2 года назад
that is so cool....always love your work...that should be in the movies
@MuchProps
@MuchProps 2 года назад
🤗 you are too kind
@kelvisvalbuena7088
@kelvisvalbuena7088 Год назад
Gracias por compartir tu ingenio y talento amigo , muy bueno tu video , yo construí una máscara de estás pero con tu video la voy a mejorar saludos desde Maracaibo Venezuela 👍, sigue adelante tienes potencial
@MuchProps
@MuchProps Год назад
Glad my template could help my friend. And a big howdy from Texas
@nagyjozsef1894
@nagyjozsef1894 Год назад
Awesome dude nice work 👍
@MuchProps
@MuchProps Год назад
Thanks 😁
@larryhughes5319
@larryhughes5319 2 года назад
Nice wrk as always sir !!
@MuchProps
@MuchProps 2 года назад
Thank you sir
@eduardotincoloayza62
@eduardotincoloayza62 2 года назад
Quedó bien chévere muy buen trabajo como siempre
@MuchProps
@MuchProps 2 года назад
muchas gracias, se agradece mucho
@CinematicTendency
@CinematicTendency Год назад
That’s sick, bro! “DILLON! You son of a b!tch!” 💪🏻
@MuchProps
@MuchProps Год назад
😄 appreciate it.
@BrushQuill
@BrushQuill 2 года назад
Looks awesome as a build. Almost has a MK1 vibe to it like the Mk1 Iron Man suit
@MuchProps
@MuchProps 2 года назад
Thanks. I can see that MK1 similarity. Maybe add so weld lines to it.
@terriwhyte8064
@terriwhyte8064 2 года назад
i love this design, glad you finished it
@MuchProps
@MuchProps 2 года назад
Thanks. I'm glad I picked it back up too
@monstermorguetutorials3139
@monstermorguetutorials3139 2 года назад
Awesomeness! love the predator franchise.
@MuchProps
@MuchProps 2 года назад
Thanks. Some cool sci-fi stuff in that franchise for sure.
@Justrex01
@Justrex01 2 года назад
How did I miss this build? Busy as hell, I guess. That was awesome! Doesn't it feel great to walk back into a stalled project and knock it out of the park? Great work, Thomas. You inspire us all. Thank you!
@MuchProps
@MuchProps 2 года назад
It IA nice to have several going and every once in a while jump ahead of schedule
@shieldofthebear1784
@shieldofthebear1784 2 года назад
Glad I came back for this one. Been out of building for a while. Good job!
@MuchProps
@MuchProps 2 года назад
That's the great thing about RU-vid, it's always here when you want to get back into it.
@terrykitchen5214
@terrykitchen5214 2 года назад
Dude that's wicked!
@MuchProps
@MuchProps 2 года назад
Thanks
@user-lx6dr4tp1o
@user-lx6dr4tp1o 2 года назад
Man, 1000 likes for You!!!!!!
@MuchProps
@MuchProps 2 года назад
👊
@raptornerd4213
@raptornerd4213 2 года назад
That is so sick. 20th century fox should hire you for future predator films.
@MuchProps
@MuchProps 2 года назад
🤗 I don't know that I am on that level by any stretch of the imagination but it is kind of you to say
@carlosjosebatista2174
@carlosjosebatista2174 2 года назад
Congratulations on the channel... Excellent!!! You are one of the few who teach how to make the projects and make it available (free download for everyone to try to do it at home... It's a shame, youtubers who make tutorials and don't provide the project link for people to try to do at home If I could in a single video I would give you 10 likes. I'm subscribed from (Brazil) here EVA is very expensive to make these projects, but we still do it with cardboard. God bless you and all yours. A big hug
@MuchProps
@MuchProps 2 года назад
Thank you very much! Glad my tutorials could be of some use.
@jeffwalker4789
@jeffwalker4789 2 года назад
Great work, thanks for sharing your version
@MuchProps
@MuchProps 2 года назад
thanks for watching.
@vincentsaliby2080
@vincentsaliby2080 2 года назад
nice
@MuchProps
@MuchProps 2 года назад
Thanks
@HakkiTeaM
@HakkiTeaM 2 года назад
great work and skill. can you make escanor rhitta axe ? will be epic 👍
@MuchProps
@MuchProps 2 года назад
Thanks for the suggestion
@aprilblackregentart6647
@aprilblackregentart6647 2 года назад
That came out really nice. Glad you got back into finishing it!
@MuchProps
@MuchProps 2 года назад
Thanks. Still have a couple more that I need to catch up on. Next week's will be quite a bit different than my normal materials. Stepping out of that comfort zone for sure
@andygorman858
@andygorman858 2 года назад
Amazing build! I’ve only ever seen the first 3 predator films but really enjoyed them. Your version is more than appropriate as they weee all individuals and customised their kit as they sore fit to do.
@MuchProps
@MuchProps 2 года назад
I think it is super cool how the franchise keeps putting out different versions of similar form factors.
@cristopherspartan2990
@cristopherspartan2990 2 года назад
Son geniales tus creaciones podrías alguna vez enseñarnos a hacer el casco de Drácula de Bram Stoker sería fantástico
@MuchProps
@MuchProps 2 года назад
Thanks for the suggestion
@vharrald
@vharrald 2 года назад
Looks like a great wall hanger Thomas . Great job
@MuchProps
@MuchProps 2 года назад
I thought so too. Thank you sir
@cpt.seabones7179
@cpt.seabones7179 2 года назад
You should make Gimli's helmet from LOTR
@MuchProps
@MuchProps 2 года назад
That would be cool. Have you seen Punished Props take on it? SKS is working on a dwarven build right now too that is pretty epic looking
@nooby_foam_crafts
@nooby_foam_crafts 2 года назад
Awesome job as always 😁😁 love it 👍👍
@MuchProps
@MuchProps 2 года назад
Thank you so much 😀
@silviocolecionaveis5608
@silviocolecionaveis5608 2 года назад
Simplesmente incrível essa máscara do Predador Thomas , parabéns pelo trabalho.
@MuchProps
@MuchProps 2 года назад
Thanks for watching my dude 😁👊
@stevenzayasrodriguez4387
@stevenzayasrodriguez4387 2 года назад
could you make the viking predator helmet I really liked your videos of viking things and I would like to see your viking version greetings from Puerto Rico
@MuchProps
@MuchProps 2 года назад
That might be a fun challenge for everyone.
@blizatrex
@blizatrex 2 года назад
This is great. I have been thinking about a Predator mask for a while and that foam backer rods would work well vs foam dowels to keep the cost down for that many.
@MuchProps
@MuchProps 2 года назад
That's what someone else suggested. I went online and looked at legit ones that people make and it was going to be several hundred dollars. I know they are not easy to do the real way but man that was an eye opener.
@brodowngaming
@brodowngaming 2 года назад
You could potentially do armature wire and dowls to make the dreads.. they may not flow but it'll look good as display
@MuchProps
@MuchProps 2 года назад
I thought about that. If I was to do them, I would want it to be mobile
@danielwesley5051
@danielwesley5051 2 года назад
Great build, also GET TO DEE CHOPPA!
@MuchProps
@MuchProps 2 года назад
😄 is it weird that I read it in Arnold's voice.
@danielwesley5051
@danielwesley5051 2 года назад
That's how it sounded in my head.
@raysodders5134
@raysodders5134 2 года назад
For the tentacles, couldn't you use the foam dowel rods with the automotive wiring harness sheaths that are black and woven? I'd think that could pull off a great look
@MuchProps
@MuchProps 2 года назад
Sounds like a viable option. I would just wonder about the mobility of them.
@raysodders5134
@raysodders5134 2 года назад
@@MuchProps yea that part I'm not to sure of just cause I don't know the flexibility of the foam dowels by themselves, but you could also melt some nylon cord between sections of the foam dowels to get them more flow if you wrap them in the sheaths?
@TheStrangeSide
@TheStrangeSide 2 года назад
WOLVERINE MASK next please 🙏🏾
@MuchProps
@MuchProps 2 года назад
thanks for the suggestion.
@jameslivingstone8267
@jameslivingstone8267 2 года назад
It wouldn't be a Muchprops prop without a lot of battle damage would it? I'm glad to hear I'm not the only one with multiple projects sitting unfinished for months before I get around to finishing them. Fantastic video as always!
@MuchProps
@MuchProps 2 года назад
😄 your right on that. When I don't dirty or battle damage them up they just seem off to me.
@Floki1313
@Floki1313 8 месяцев назад
What would you add to it so you could wear it. Your video is the best one on making it. I have been wanting to make a full predator suit.
@MuchProps
@MuchProps 8 месяцев назад
I thought that it would be a cool idea to get one of those predator latex masks and wear one of these over the top of it.
@DanielPMbadboy
@DanielPMbadboy 5 месяцев назад
Gracias por el video, me ayudo muchísimo para poder hacer la máscara que tanto quería. 👍 La acabó de terminar y me salio genial, pero yo la hice en cartón jejeje. La terminé, pero me sobro una pieza 😅, dónde va la pieza que dice "Side Brim"???
@MuchProps
@MuchProps 5 месяцев назад
Just glad I could help. Make sure to let people know where you learned how. 😁👊
@gonzaler99
@gonzaler99 2 года назад
Awesome build..you continued it cuz of "Prey" trailer? You gonna attempt the Predator gauntlet next?
@MuchProps
@MuchProps 2 года назад
I might know someone who worked on the film and it was the initial reason I started this build. Haven't had a chance to see the trailer yet.
@jackcrow7128
@jackcrow7128 2 года назад
Long time viewer first time commenter. I would like to acquire the template you are using for the prop. The pattern is not the same i have found for standards makers.
@MuchProps
@MuchProps 2 года назад
Patterns are in the description of the videos. It's the last link at the bottom.
@cpt.seabones7179
@cpt.seabones7179 2 года назад
An idea I have for the dreads is that you can use foam dowels.
@MuchProps
@MuchProps 2 года назад
I thought of that too. But they would need a weight added to them fir movement and I would need to get some low density ones as most are a bit too rigid
@joehayward4545
@joehayward4545 2 года назад
Very cool build. Still waiting on the alien head shield, & the Thundarr the barbarian sword. Are you going to do the bladed gauntlet & the should gun?
@MuchProps
@MuchProps 2 года назад
I have actually already done a blade gauntlet. I linked it on the video at the beginning
@joehayward4545
@joehayward4545 2 года назад
Thank you. I must have over looked it. How is the alien head shield coming?
@TheVergil06
@TheVergil06 2 года назад
second comment wooooow as always great video
@MuchProps
@MuchProps 2 года назад
😄🥈👊
@tubagus.a2159
@tubagus.a2159 2 года назад
next can you make COD warzone simon ghost mask?
@MuchProps
@MuchProps 2 года назад
Thanks for the suggestion.
@mendes5308
@mendes5308 2 года назад
this mask is from which movie from predator?
@MuchProps
@MuchProps 2 года назад
Not from any particular one, but based on several with some of my own embellishments
@emmanuelocegueda8762
@emmanuelocegueda8762 Год назад
Did u get this done in one day?
@MuchProps
@MuchProps Год назад
No. Lots of hours figuring out parts and details. Could you, with the template done for you and an instructional video? Maybe.
@ballwelder2857
@ballwelder2857 2 года назад
Hey Thomas! Lately I’ve been having trouble opening any of your template links in the description of your videos. This is likely a me problem but I can’t find any solutions. Any help?
@MuchProps
@MuchProps 2 года назад
If you are trying on a phone or tablet it is because they don't support the file type. You can go to the app store of you device and download a PDF reader extension. This should fix your problem
@ballwelder2857
@ballwelder2857 2 года назад
@@MuchProps I’ve actually been doing this on a laptop and not any mobile device, so I think it’s just the laptop.
@T-RexTalents
@T-RexTalents 3 месяца назад
PLEASE DO THE ALIEN FROM DESTROY ALL HUMANS
@MuchProps
@MuchProps 3 месяца назад
Thanks for the suggestion
@stevenzayasrodriguez4387
@stevenzayasrodriguez4387 2 года назад
are not the templates yet?
@MuchProps
@MuchProps 2 года назад
Sorry. I was out of town this weekend for a loss in the family. Trying to get caught up today. It is up now.
@ShamanKingTan-ju
@ShamanKingTan-ju 2 года назад
im gelouse howe mutch ? :D
@MuchProps
@MuchProps 2 года назад
Lol. I do sell most of my props. There is a link in the description to my Etsy shop.
@snowfoot9854
@snowfoot9854 2 года назад
could you make halo 3 hayabusa helmet
@MuchProps
@MuchProps 2 года назад
Ooh. That is by far one of my favorite Halo helmets. I might have to think about that one
@naldomaria
@naldomaria Год назад
Oi amigo fais a mascara de sexta feira 13 Do filme
@MuchProps
@MuchProps Год назад
No, I have not, but it is on my list for this Halloween.
@fortnite.short.3000
@fortnite.short.3000 2 года назад
Plz make mecha team leader helmet from fortnite skin
@MuchProps
@MuchProps 2 года назад
Thanks for the suggestion
@fortnite.short.3000
@fortnite.short.3000 2 года назад
If I suggested... Plz do make it
Далее
Making a Foam Maximus Helmet
18:54
Просмотров 7 тыс.
Women’s Celebrations + Men’s 😮‍💨
00:20
Thermal Vision Helmet! (PREDATOR SUIT BUILD)
16:33
Просмотров 3,5 млн
How Lifelike FX Creature Masks are Made
19:54
Просмотров 1,7 млн
The Ultimate Glue Quest - Best Adhesives for EVA Foam!
17:28
Foam Crafting a Spawn Mask
15:56
Просмотров 10 тыс.
Make Your Own Predator Costume - DIY Costume Squad
15:05
How to Build a Foam Cosplay Helmet! (For Honor game)
21:14
13 Unique PREDATOR Helmet Designs
6:09
Просмотров 172 тыс.
How to make a Xenomorph Head out of CARDBOARD
15:54
Просмотров 548 тыс.
Making a Custom Anubis Helmet
21:12
Просмотров 30 тыс.
Predator Foam Helmet Tutorial
13:16
Просмотров 277 тыс.
Могу делать, могу не делать
0:20
Living life on the edge 😳 #wrc
0:17
Просмотров 7 млн
#saiho
1:01
Просмотров 1,3 млн