Foam Wing Sheeting

Подписаться 495

Просмотров 23 тыс.

50% 1

Foam wing Sheeting demonstrates how I sheet foam wings with balsa. I use Gorilla glue and really like this simple but effective technique. I’ve sheeted a lot of RC Airplane wings over the years and this really makes it enjoyable. Plus you don’t have to mix anything. This is a vintage pattern plane called a Boxer 60. Scratch building this plane is turning out to be a really nice project.
Music by:
chillhop.bandcamp.com/
Vanilla - Blue Sun
/ vanilla
Dennis Tyson Plein Air (My other Channel) can be found here:
/ @dennistysonpleinair

Опубликовано:

8 дек 2018

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 20

@Mike-01234 Год назад

Gorilla glue is amazing stuff whoever invented it should get an award.

@Dr.Gunsmith Год назад

Fantastic

@sotm6078 3 года назад

In the 70s when we sheeted foam wing cores with 1/64 th ply we used contact cement on both surfaces used kraft paper between them when aligning and then pulled out the kraft paper and rolled. Sheeting was done and no weigthing required.

@eligaga 5 лет назад

impressive work.

@charlesklein7232 4 года назад

its been 1 year since your last video and im assuming your no longer their. you desive some type of medal! it was interesting to see what your world looked like. you are a master! i would have many questions but it appears they got you.

@PeterOZ61 2 года назад

and in Queensland Australia during summer the working time is about 2 seconds!

@darkhorsegarage9623 4 года назад

I used to make pylon wings. One time I used a spray adhesive. But did not allow the chemical to dry or gas out. After clamping the foam in the cores with the wood sheets to dry I let them sit. The next day I discovered the glue dissolved the foam.

@sendit2873 5 лет назад

someone needs to clean up a bit lol looks like my wokshop hope you have a dehumidifier in there alot of dampness in a basement keep up the good work

@danielnixon1976 5 лет назад

Have you had any issues with sagging or separation on the under side during hot days? I am building two 1/5th scale AT-6 Texans. What cloth weight do you use? And I can't find 1/4 oz clothe any more. Only 0.56.

@charlesbovalis6591 3 года назад

Are you rinsing the foam roller after you are done laying down the glue for future uses or it's a one time use ? Excellent video by the way ..

@cratecruncher6687 3 года назад

Thanks for sharing your process. I've heard people use sorghum, epoxy, 3M 777, even expanding foam. I've only used 777 and found it very messy. I might give the Gorilla stuff a try on the next one. Incidentally, I have a minilathe and aluminum stock. It would be interesting to see how you fabricate your struts. I assume the ale is held in the strut with a T-pin?

@shelbyseelbach9568 3 месяца назад

So, the take away is to only roll the glue with the grain, not against it.

@hogsnplanes 3 года назад

Funny how us rc guys end up building wood ultralight airplanes

@lawrenceessard4086 Год назад

Why the carbon?

@dirkgrobler2179 2 года назад

Is this channel still active?

@charlesbovalis6591 3 года назад

Where do you get the carbon tow and is there any particular thickness you use ?

@peterzingler6221 3 года назад

Im sure you already found it but for everyone else look for rovings

@tomewing3103 3 года назад

I’ve been building for 65 years and always watch videos for something I might have missed and sure enough I picked up a few things I’d missed, I thank you for that. Btw head mounted camera, not good. Made me turn off motion and watch in still mode. Informative video but too much motion.

@jeffreylaporte9923 3 года назад

The head mounted camera was not a good Idea. Your rapid head movement made me motion sick. Other than that. it was a very helpful video. I will be building my first set of foam core wings this winter.