Foiling with a Laminator - Is it Comparable to a Minc?

Подписаться 17 тыс.

Просмотров 103 тыс.

50% 1

I was very lucky at the end of last year to score a full sized Minc Machine for just over $100. I've been playing with it a lot, and finally got around to doing a real battle video comparing the results. Who will come out on top? Watch my video to find out!!
February's LIVE video will be tonight at 8pm AEDST! Come hang out with me.. I have lots of exciting things to show you... including a project using my Minc!
--------------------------------------------------------------------------------------------------------------
plummashable
plum_mashable
plum.mashable01@gmail.com
Po Box 229 Werribee VIC 3030
Discount Codes:
Blitsy: blitsy.com/ref/p8e9mo
Planners Anonymous: plannersanonymous.refr.cc/ashl...
-------------------------------------------------------------------------------------------------------------
Videos Mentioned:
How To: Foiling with a Laminator:
• How To: Foiling with a...
Products Featured:
Lowell A4 Laminator: $19.97
bit.ly/2yvvjv9
Heidi Swapp Minc Foil Transfer Machine: $199.99RRP (I got mine at 40% off with a voucher.. wait for the sales and see how much you can save!)
bit.ly/2r4lxhO
Heidi Swapp Heat Reactive Foil - Gold: $19.99
bit.ly/2gq58jj
Interested in more videos about Foiling with a laminator? Check these out!
• Video Comparison: the ...
• Using a laminator for ...

Опубликовано:

19 фев 2018

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 158

@elztim5461 4 года назад

For those who cant manage with a laminator, try to add a thick paper lets say 300gsm or more, just under the card with the foil on top. Most laminators dont give the right pressure on the foil to stick perfectly. So adding aditional paper under may help.

@PlumMashable 4 года назад

Great tips Elz! Thanks so much!

@mousty33 4 года назад

@24HourDiva 6 лет назад

Nice video. A key to not having any exposed ink transfer on your MINC transfer sheet is cover any exposed ink with Parchment paper (baking sheets) and ink won’t transfer when you put it through the Minc foiler 🙃

@PlumMashable 6 лет назад

Great tip! Thank you so much!

@Slimm_Sheedah1 4 года назад

24 Hour Diva thanks for that!

@lolamiller7556 5 лет назад

Thank you so much for this comparison. I started out with a standard inexpensive laminator and was never happy with the results. I did find out later on that I wasn't letting it heat up enough, but still not very satisfied. I was able to get a full-size Minc last year for Christmas for $70 (US) from Amazon and have not regretted it one bit.

@PlumMashable 5 лет назад

I need to get my minc out more often, but I definitely think that if you do foil often, the minc is worth it. I'm so glad you found it useful!

@clumsydasmirf 5 лет назад

Got mine for 60

@dragonflydenise 5 лет назад

Great video. Really gives you a good idea of how both perform. Thank you.

@PlumMashable 5 лет назад

So welcome Denise. Thanks for watching x

@MoniqueCalabro 6 лет назад

I love your B roll footage! and the comparison is really nice! thank you!

@PlumMashable 6 лет назад

Thanks Monique. I'm glad you enjoyed it!

@marinab4262 6 лет назад

I use a laminator with my foil and it works perfectly. However, I have a laminator with different settings, most standart laminators don't seem to get hot enough for most foils. Trying different papers to put the print and foil inside also helps with different foils, it's really a bit of trial and error. With the foil I use I set my laminator to 125~175 mic (lamiators without settings usually have the lower heat for around 80mic) and put it inside of a folded sheet of 195g paper. It really depends on the type of laminator, those with more temperature settings tend to be more expensive than the regular 20$ ones but still far less expensive than the minc. :)

@PlumMashable 6 лет назад

I think if you are someone who just wants to foil occasionally and doesn't mind if you don't get 100% perfect results, a laminator works fine. That said, I love my minc, so very happy I have it! Thanks for the tips though :)

@sw-ew1ed 5 лет назад

Hi can you help me?? I have a laminator that can have really high settings. The problem is when I use like 150 it kind of over foils...like the other area gets the foil shimmer. When it's low...it doesn't foil. Do you like first heat only the paper and then send it??

@BeatlesFanSonia 5 лет назад

s w I use the laminator on the lower setting but send it through twice.

@jamiemonroe9236 2 года назад

What kind of laminator do you use?

@laurafernandez1035 4 года назад

Fantastic review! Just what I needed! Thanks!!

@PlumMashable 4 года назад

So glad it was helpful Laura! Enjoy!

@carolloe2188 2 года назад

Good review- thank you. New to foiling - my 1st tries with laminator failed but I keep trying! Lots of good tips here.

@PlumMashable 2 года назад

Thanks so much Carol. I'm glad you got something out of it! :)

@peiyul3520 4 месяца назад

thanks for the comparison. I wanted to do hot stamping DIY lately, and have been researching. Conincidentally, I have the same Lowell Laminator, and was thinking if I could just use it to DIY, instead of investing a whole new DIY machine. and really greateful you have people here who comment and gave new ideas to it. Thanks allot again. Spotlight rocks.

@RaeMcDonald 6 лет назад

I found the same. I bought my minc with a 40% Spotlight voucher last year, after having used a cheapy laminator for foiling for about a year previous. The minc does give a generally better and more consistent result. Whether that makes the cost worth it or not, is a really individual decision. For me it definitely was worth it with the discounted price I got mine for (from memory I paid around $112). Great review!

@PlumMashable 6 лет назад

Thanks Rae. I agree completely. It really does come down to if you want those consistent results or not. I'm glad you enjoyed the video.

@ksamaseia 5 лет назад

Just bought the 12 inch Minc last week from Spotlight. It was already $40 off on sale and then used the $40 coupon so got it for $120. I'm happy with that. Thanks for the video!

@PlumMashable 5 лет назад

Great work! I love when Spotlight have the big sales!

@hurricanekitty6736 4 года назад

“This one took a REALLY LONG TIME to heat up, about 3 MINUTES”....that made me giggle 😊

@PlumMashable 4 года назад

#firstworldproblems lol

@HarryMcKenzieTV Год назад

thanks for sharing and validating my results with the laminator. im currently thinking of getting the minc machine. i noticed that if i foil something with my laminator that is small in size i get relatively good if not perfect results. but as the size of the foiled surface increases, the more inconsistent and wrinkly the output gets.

@squuezybiscuit 2 года назад

Thank you for taking the trouble to do the comparison. I tried today with my laminator result was ok, but think I will get the Minc based on your great video

@PlumMashable Год назад

Hey Eve! I'm so glad you found it helpful! There are lots of different ways to foil nowadays, but sometimes the old fashioned way is just as good!

@christineh86 2 года назад

Thanks for this!! I think I will get the Minc because I always get holes in my beautiful designs with the laminator and I get so frustrated over it! Sure cool distress effect but I want to choose when to have distress effect or not 😁

@PlumMashable 2 года назад

I find that even with the Minc, results aren't guaranteed. If you can accept the less than perfect results, you'll enjoy foiling a lot more!

@debschurby1574 2 года назад

First off… those who commented/complained about words & length of your video should be made aware there’s a fast-forward option. You responded very graciously. 💖 I’ve been teetering on the fence with this foiling thing. I have the AG Empress die cutter & l haven’t seen a companion hot foil machine, so trying to decide that way or to invest in the minc. I do have a super duper laminator l need to investigate the foiling options. I appreciate that you talked through your thought process & took the time to show comparisons with both machines. 👏🏻👏🏻👏🏻👍🏼🙏🏻

@PlumMashable 2 года назад

Thanks so much DK. Everyone has their opinion, but I'm glad you liked my video. The biggest thing I've learned is it has more to do with your paper than it does with your foil or machine. Find the best cardstock or paper and you'll be set... even with a cheap(er) laminator! Good luck!

@beauti60 4 года назад

Great video thank you for shairing.

@PlumMashable 4 года назад

Thanks Patricia

@Gyft22 Год назад

great video, just what I needed to see

@PlumMashable Год назад

So glad it helped you Audrey! Thanks for watching!

@lovedicedtomatoes9653 5 лет назад

Thanks for this. I love your accent.

@PlumMashable 5 лет назад

Thanks so much! I'm glad you enjoyed my video!

@sallyannfunder 6 лет назад

And you can remove "mess" from the folders with nail varnish remover... I found out by mistake :-)

@PlumMashable 6 лет назад

I'll have to try that. Thanks for the tip!

@f3rzz476 5 лет назад

I guess you panicked at first 😂

@jess8151 3 года назад

Thankyou for this vid! Just wondering if foiling can be done on glossy sticker labels?

@PlumMashable 3 года назад

As far as I am aware, yes you can. As long as it can go through a laser printer!

@whoooami2090 9 месяцев назад

5 yrs late here. I gave up foiling because I was unable to get good results with the laminator certain crafters recommended. I finally purchased the mini minc and I have to say, I was floored. The results are perfect! I wasted so much time and money with the laminator🤬. I don’t think the laminator gets hot enough.

@megpaul8076 6 лет назад

This was so helpful! I have an odd question: what's the longest you've waited between print and foiling? I have a laser printer at my office but I have to drive home with my printables. Do you have any experience with longer periods between printing and foiling? Say, an hour or so? Thanks!

@PlumMashable 6 лет назад

HI Meg, the longest I've waited between printing and foiling is about a week - I have printed them and then forgot them and then gone back to it.

@kezzaroo 6 лет назад

I watched a different video where the host said they had left it for months so there really is no urgency with it :)

@susanna1207 Год назад

I just (march 2023) checked if my 5 year old prints still work. They do 😅

@pmacorky Год назад

You can get the overfoiling on your carrier sheet off by using acetate ,nail polish remover but not one with conditioner or additives in it

@PlumMashable Год назад

oooh.. thanks so much for the tip! :D

@wileycovington4497 2 года назад

I've learned that buying quality foil makes all the difference.

@PlumMashable 2 года назад

Foil does certainly make a difference! Great tip!

@cindytran8620 5 лет назад

Just got a Minc machine on amazon brand new for $64 and that’s including tax. It’s sold by “American crafts”

@PlumMashable 5 лет назад

Hey Cindy, thats a great buy! Well done!

@craftsbyalisha1918 3 года назад

thank you, i was about to buy a laminator , now im ordering a mic machine

@PlumMashable 3 года назад

So glad it helped Alisha! Have fun with your new toy!

@zenlicious 6 лет назад

i have used a laminator with my foil and it comes out patchy every piggin time, even when I run it through a couple of times.. any suggestions to improve would be very welcome

@PlumMashable 6 лет назад

Have you tried rubbing the foil after its been through the laminator? I find that sometimes helps. Also, try running it through with thinner paper.. like baking paper.. instead of normal printer paper.

@BenRequena 5 лет назад

Sounds like bad toner. Try testing with different laser printers. Your local print shop or library may be inexpensive resources.

@charlottegregory2624 4 года назад

Hello, your videos are amazing! I was wondering if you could give me a little advise if possible? I’m a designer so have good knowledge of photoshop/illustrator. I’m looking to design and create my own foil wedding invitations for my wedding and I just can’t seem to get it right! They’re created in illustrator, my colour setting is set at K 100% CYM 0%. But when they’re printed and go through the minc machine I am getting tiny black spots! I have tried everything and I mean every setting on the printer, setting on the minc machine and those black dots are going no where! Just wondered if you had any advise? Thank you in advance!

@PlumMashable 4 года назад

Hi Charlotte. I sometimes have the same issue with foil dots transferring. My best advice is try it on different heat settings.. start on the lowest and move up until you get the best result, but leave everything else the same (same paper, same foil, same protective sheet). Let me know how that goes!

@marjanatir7913 4 года назад

Hi ! I have a question, does it allow to transfer foil on a plastic surface, or does it only work for paper ? Thanks a lot

@PlumMashable 4 года назад

Hey Marjana. I'm not sure about plastic to be honest. I've never tried. It would depend on the kind of plastic, as the plastic could melt in the laminator?

@crystalharris9076 4 года назад

Can you use any laminating sheets for the minc? I don’t want to invest in a minc if I have to constantly use minc products to get good results.

@PlumMashable 4 года назад

When it comes to laminating, any sheets work fine. You don't need to use Minc foil to get a good result, but I do find its slightly more consistent, but not by much. Hope that helps!

@shelldalton2775 2 года назад

You can get the ink off your carrier sheet with acetone comes off very easy

@PlumMashable 2 года назад

Ahh!! thankyou so much Shell! I'll make sure to try that.

@gothmaniow 3 месяца назад

What are the folders you use ... As i have tried the normal laminating sheets and they just seal themselfs like they are supposed to do ...thank you

@victoriacunningham6582 11 месяцев назад

thank you 😊

@danicawhite5478 5 лет назад

I don't know if this is a dumb question but I'm just curious when you do use a laminate not necessarily the mink one but a regular one does it actually laminate or do you take the laminate out or is it just to heat it up I'm a little confused on the process if it's question makes sense

@PlumMashable 5 лет назад

Hi Danica. You don't use a laminating pouch when you are foiling. I usually just use normal kitchen baking paper to stop the laminator from burning the foil. Let me know if that doesn't make sense and I'll try and explain better

@mjmaruf 5 лет назад

I had the same question. You show the process using some kind of plastic pouch (which was mentioned as a small laminating pouch in the beginning of the video). I’m guessing these are not “laminate-able” that come with the minc. If so, can we buy these separately?

@PJCC_BAISH 5 лет назад

Thatz what am thinking too.. Is the principle of foiling is just heat it up to transfer tje foil to laserjet inked paper?..

@eyeballing_ 5 лет назад

Hello, I was wondering if you've had any experience with foiling on a piece that has been double printed, with both an Inkjet and Laser printer? For example, printing a design with an Inkjet printer and then reprinting with a Laser printer to add extra elements that would put down toner for the foil to adhere to? Thanks very much, your video was helpful as I'm interested in getting into foiling!

@PlumMashable 5 лет назад

I haven't ever done it, but I would love to try. I just don't have a inkjet printer at the moment.

@eyeballing_ 5 лет назад

Totally understandable, thanks for the reply!

@elztim5461 4 года назад

It works. You can try with no worries.

@angusgluck4173 4 года назад

I love your video content, its always good. One thing though, I think keeping it a little more succinct would be good. They get a little long for a pretty simple idea to get across

@PlumMashable 4 года назад

Thanks so much for the top Angus. I'll try and make my videos a bit shorter.

@susiebrooke3852 2 года назад

I don’t think it was long at all great info thank you for doing it !

@taylahcurrie362 2 года назад

For a laminator can I use baking paper over the foil and card an put through the laminator or do you recommend going Card Foil Baking paper Normal white printer paper ? Thank you

@PlumMashable 2 года назад

Hi Taylah, it honestly doesn't matter so much, you could even go through with not the printer paper and just put baking paper. It all depends on your laminator and the temperature it hits. Trial and error is the best way. Good luck!

@adminmusicmgt7109 Год назад

Whats the plastic protector sheet that you have? I need something like that for my minc :)

@PlumMashable Год назад

Hi There. They are the transfer folders. Check out this link to find more information (americancrafts.com/products/heidi-swapp-minc-transfer-folders-2-pkg-6-25x12-12-25x14) but a google search will find you stockists in your country! Thanks for watching!

@sword123n 2 года назад

Hi I was wondering if we can Foil fuse a mylar bag / standy pouch . Do u think it could work🤔

@PlumMashable 2 года назад

I'm not sure.The mylar might be too thick. I have some here I can play with when I get a chance. You mean fusing it together though, not foiling it right?

@LetroyAltidor57 6 лет назад

Nice

@GranHM 5 лет назад

Would love to have a Minc, using my cheap laminator I found, that it is too hot. It only works in the beginning, when it is on for a couple of minutes not only the prints are transferred to but lots of the whole sheet where there is no print. I discovered that after switching the laminator off for 5- 10 minutes and then switch it on again, the transfer is perfect allthough the laminator didn't give the green light for full heat. Trial and error.............. it's such a hard life as a wannabe crafter :)

@PlumMashable 5 лет назад

Great tips Herma! I love trying new things and failing - I think you learn so much more from mistakes than successes!

@WendysCraftDen 5 лет назад

Hi Herma. A sign of good a crafter is having the ability to find out tips and the best way to use things you have. You are a definiatley a crafter not a wannabe. My laminator arrived this morning so you can guess what I will be playing with later. Have fun xxx

@daveblue4303 3 года назад

I am having the same problem, when I run it through my normal laminator the foil transfers onto my design as well as all over my cardstock, I'm guessing my laminator is to hot, so I am going to use it when its warm.

@sandraruiz3834 2 года назад

I'm so glad I watched this looks like I'm getting a minc 😂

@PlumMashable 2 года назад

Good on ya! They are lots of fun!

@soniaguzman762 3 года назад

That large Minc is on Amazon right now for $78!

@PlumMashable 3 года назад

Great tip Sonia! Thanks so much for sharing!

@lyndahollins2881 Год назад

Hi 5 years in the future lol. I have 50 wedding invitations to foil and I only have a inkjet printer, I am thinking of going to officeworks to print them on the lazer printers, then laminating them with foil. do you recommend the MINC. as it is $168 here in Western Australia.

@PlumMashable Год назад

5 whole years! Wow! I can't believe people are still watching, but thankyou so much! I kept breaking my Minc's so now I just go with a $20 laminator, and it works just as well. Save your coins for the wedding :D

@BeatlesFanSonia 3 года назад

It’s on Amazon for $78 today! The large one for $78!

@PlumMashable 3 года назад

Awesome! Great price. Thanks for the tip!

@R4YLA 4 года назад

Hi did yu use a laser print or inkjet square?

@PlumMashable 4 года назад

Hi There. It has to be a laser printer. I hope that helps x

@martynaosuchowska7339 2 года назад

Did you try minc higher temperature for this print?

@PlumMashable 2 года назад

Hi Martyna, I've tried all temperatures and I get mixed results. I do find they are slightly more consistent with the Minc though.

@oli4oli 3 года назад

What kind of pouch are you using? It doesn't completely seal in the laminator.

@PlumMashable 3 года назад

The pouch is a special minc one that won't seal up. It's called a transfer folder. They aren't necessary and you can use computer, baking or parchment paper instead if you wish. Here's the link to them on Heidi's website, just in case you want to check them out though : heidiswappshop.com/shop/minc-transfer-foilder. Good luck!

@oli4oli 3 года назад

@@PlumMashable thank you

@chootxhishan 3 года назад

Can you put the paper twice in the laminator and see the results?

@PlumMashable 3 года назад

You absolutely can. I find generally the second time around doesn't do much though. Thanks for watching!

@sallyannfunder 6 лет назад

Just a short note... the Mini Minc is NOT A4 - the opening is (I believe) 6 inches wide :-)

@PlumMashable 6 лет назад

Thanks for letting me know Sally. Sorry for the mis-information

@ayellessnuffelhoek 6 лет назад

Is it for sale? How much is it??

@estherwilliams4465 3 года назад

Is there permanent foil to iron on fabrics?

@PlumMashable 3 года назад

Hey Esther. I'm honestly not sure. I think there should be though but it would be heat transfer vinyl. I get most of that from Skat Katz (skatkatz.com.au) if you want t o check it out!

@CarolAnn61 5 лет назад

What printer did you use? I know it has to be a laser printer, but what model? Thanks from Sydney 😁

@PlumMashable 5 лет назад

Hi Caril Ann. The printer we use is a Toshiba 3505ac.

@CarolAnn61 5 лет назад

Hi, I bought a printer, just a home use one. The sales person knew about foiling and said this printer would work 😁

@ofiro9207 4 года назад

Someone has a link to Amazon to a full size machine ?

@PlumMashable 4 года назад

www.amazon.com/Heidi-Swapp-Minc-Applicator-Starter/dp/B01FWQR9F0/ref=sr_1_3?keywords=heidi+swapp+minc&qid=1572822520&sr=8-3 Hope this helps!

@shyladiaz4617 3 года назад

Does it stick only on laser print ?

@MrsBee-uo2lc 3 года назад

Yes. But they also make a pen that you can use or just go to your local print shop and ask them to print for you on a lazor printer.....,.

@PlumMashable 3 года назад

Hey Shayla, yes it only sticks to things printed with a laser printer. The toner reacts with the foil. I hope that helps!

@PlumMashable 3 года назад

I've not found the pen to be very good, but the toner ink is pretty good! Thanks for commenting!

@malillis608 5 лет назад

You didn't mention what type of printer you used. I ask because I know you "must " use a laser printer, but have seen people use other printers besides a laser printer and still had it work. Would really like to know which printer you used. I really would like to not have to buy another printer. Thx

@PlumMashable 5 лет назад

I use a Toshiba studio 3505ac printer. It is a commercial sized one as Ryan works in Graphic design, but maybe others can let you know what works for them.

@raymondpabon1544 5 месяцев назад

Si lo pasas dos veces por el laminador????

@clarasotelo6910 6 лет назад

Donde las venden... ??? El nombre de la maquina, por fa !!!

@PlumMashable 6 лет назад

Hi Clara. Where are you located in the world and I might be able to help you find where to buy a Minc from :)

@clarasotelo6910 6 лет назад

Buenas tardes, linda,.. gracias por responder,.. soy de Chile !!

@NinaS___ 4 года назад

How come the plastic pocket didn’t get laminated? You mentioned something about white paper?

@PlumMashable 4 года назад

The plastic pockets is heat resistant, which is why it didn't melt. The white paper was just to protect the pocket from any toner transferring to the plastic. Thanks so much for watching!

@NinaS___ 4 года назад

Plum_Mashable Great. I don’t know where to get heat resistant plastic pockets. (I live in Norway, so I can’t buy from US hobby-stores).

@NinaS___ 4 года назад

Plum_Mashable I just realized I have cooking plastic bags - they sure are heat resistant!

@vonryanmacaraeg4080 5 лет назад

Were to buy

@PlumMashable 5 лет назад

You can buy laminators from any office supply store and you can buy a Minc machine from craft supply stores.

@sn5700 6 лет назад

Run it through a couple times

@PlumMashable 6 лет назад

Thanks Saad. I'll try that!

@BeatlesFanSonia 5 лет назад

The full size Minc on Amazon is $89 and a Scotch laminator is $21.

@PlumMashable 5 лет назад

Thats great information BeatlesFanSonia. Thanks for sharing it with us x

@kalyanramang1315 5 лет назад

what types of foil you are using in minc machine

@PlumMashable 5 лет назад

I'm using Heidi Swapp Minc foil in these videos, but I have also used Couture Creations with good results

@surgicaltechcrafter2169 4 года назад

I was able to pick up my minc at Joann with coupons it ended up being 70.00

@PlumMashable 3 года назад

Great work! I love my minc, and I'm glad I have it, but also glad when you can save some $$$

@donnacullman4103 5 лет назад

I have had 2 Minc.s and both of them the rollers stopped working after just a few uses.

@PlumMashable 5 лет назад

I've had my Minc for just over 12 months and while I don't use it super regularly, I haven't had an issue. I am so sorry that this happened to you. Perhaps the cheaper laminator might be a better choice for you then?