Тёмный

Ford 6.7 oil change video HowTo - ALL POWERSTROKE owners should WATCH!! 

PowerStroke Tech Talk w/ARod
Подписаться 169 тыс.
Просмотров 75 тыс.
50% 1

Important MAINTENANCE tips FOR YOUR 6.7 - OIL CHANGE TIME!!!! What up FAM!! Smash that like and Sub if ya haven't already!!👍😉 Many viewers have asked me to do an oil change on a 6.7 diesel WITHOUT using my hoist so they too can do as I do....just like PTT. If you already know how aaaaaaand wanna watch a pro do it, or maybe you don't know at all...watch me complete this quick PM as we all relish within, 6.heaven! Ciao see YA NEXT FRIDAY!!
Check out my Instagram
@PTT_W_AROD
Music: ------------------------------
Relax by Peyruis / peyruis
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
Free Download / Stream: bit.ly/2RkwcNw
Music promoted by Audio Library • Relax - Peyruis (No Co...
------------------------------
To send a small donation to help my channel grow & to also to contact me, please visit my Paypal at my email powerstroketechtalkwarod@gmail.com
I am the creator and owner of this material. It does not belong to; nor is affiliated with ANYONE, except for me, the owner and creator. Downloading is strictly forbidden. Contact me if you want my material, its that simple! The events, the characters & even the firms depicted in my photoplay are fictitious. Any similarity to actual events, persons living or dead or to that of actual entities are purely coincidental.

Авто/Мото

Опубликовано:

 

16 апр 2020

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 350   
@Gustavo-rg3mb
@Gustavo-rg3mb 4 года назад
Bro when you removed the oil filter without getting a drop of oil on your hands I was truly impressed lmao. Another banger
@PowerStrokeTechTalkwARod
@PowerStrokeTechTalkwARod 4 года назад
Ayyyyyyyyyyyyyyyyye boi
@akbychoice
@akbychoice 3 года назад
I pull a vacuum on the fill tube and never get oil going all over the place. Just use a remote to start and stop the vacuum. 1. Turn the vacuum on, take out the drain plug. 2. Turn off vacuum with catch container in place. I use a 5 gallon bucket with a plastic trash bag inside ( makes clean up a snap ). 3. Replace drain plug. Turn vacuum on. 4.Poke a hole in the bottom of the filter with a catch can in place. Turn vacuum off. 5. Grease the chassis. 6. Remove oil filter. Clean the mating surface. 6. Use engraver to mark the filter with mileage, date and oil type. Lube o-ring and partially fill filter and install. 7. Refill oil and check. Start engine, reset oil life. Stop engine and recheck oil level.
@PowerStrokeTechTalkwARod
@PowerStrokeTechTalkwARod 3 года назад
Gussssss where r u
@birdlady2725
@birdlady2725 3 года назад
Just got a used 6.7 and the hardest thing for me being old and arthritis in hands, is grip to undo bolts n filter. Process seems straight forward. Thank you for teaching old ladies new tricks. I have owned and operated all the way up to 10 speed tractor trailers otr, but always had others do maintenance. Now as about to roam free, pray to do basics as needed on my own. Crazy, Right? Lol. Peace.
@6582rg
@6582rg 3 года назад
I added a Fumoto F106 6.7L oil drain to make it more controllable to drain the oil while I’m on my back. Comes with a 3/8” clear hose that connects to the valve and runs into your oil pan. Better than staining my garage floor and arm with dirty oil.
@turb0z
@turb0z 2 года назад
Thank you! I have a 2017 6.7 power stroke I’m going to be doing an oil change for and this seems super straight forward! I’ve done oil changes on gas engines before, and the little tips and tricks you provided were awesome!
@PowerStrokeTechTalkwARod
@PowerStrokeTechTalkwARod 2 года назад
Thank u sir
@MorganBurris
@MorganBurris Год назад
Thank you! We just purchased a "new to us" 2015 F250 SuperDuty and I like to do all the maintenance on our vehicles myself since we can't find anyone around anymore who is reliable. I am enjoying all your videos so far. Thank your again as I learn about this new truck and engine. Your instructions are clear and your camera work is clear and well angled!
@PowerStrokeTechTalkwARod
@PowerStrokeTechTalkwARod Год назад
🙏🙏🙏🙏🙏🙏💯💯💯💯💯💯💯🤝🤝🤝🤝🤝🤝🤝
@whiskeytangofoxtrot9403
@whiskeytangofoxtrot9403 4 года назад
Always a pleasure to watch Super Duties getting love.
@PowerStrokeTechTalkwARod
@PowerStrokeTechTalkwARod 4 года назад
My pleasure
@CarlosRodriguez-hb3vq
@CarlosRodriguez-hb3vq 3 года назад
Great video and tips. I’ve done hundreds of oil changes, but that diesel engine oil is straight outta La Brea. Anything one can do to avoid spilling it is worth it.
@bensalien1436
@bensalien1436 3 года назад
I love the instructional videos bro! You also take care of these trucks like their your own 👌👍
@PowerStrokeTechTalkwARod
@PowerStrokeTechTalkwARod 3 года назад
I do!!!!!
@trevordaher5825
@trevordaher5825 4 года назад
I love the exxon valdez quote🤣🤣 We use that term in my diesel classes.
@PowerStrokeTechTalkwARod
@PowerStrokeTechTalkwARod 4 года назад
Hahahahaha don't be a spillling
@calebheddy1447
@calebheddy1447 2 года назад
Always make sure the oil filter gaskets stayed attached to the filter. It's easy to miss that and have 2 gaskets stacked up.
@jasongrinnell1986
@jasongrinnell1986 2 года назад
Yes that will happen. Happened to me once.
@dzw4826
@dzw4826 2 года назад
LOL... Yeah it sucks when you try and try and try and try to get the oil filter on...can't figure out why it won't catch... Only to realize the old rubber is still on. I'm commenting for a friend... :)
@Nootaxx1
@Nootaxx1 2 года назад
i changed my oil today and that happened to me. i only noticed because the filter wasn't flush.
@kevinvernon841
@kevinvernon841 2 года назад
Been there done that !!
@JoSep.96
@JoSep.96 Год назад
I always make sure there’s at least 4
@tylermacconnell217
@tylermacconnell217 4 года назад
Great job. I appreciate the effort you make to ensure the oil filter doesn’t have oil leaking down the side. I’ve had my own 6.7 Ford returned from a dealer oil change, leaking. I hate looking in through the side and seeing the dirty oil on the white filter. Few techs would bother. Does look like the brake clean just about removed the Motorcraft logo though! I use the same exact oil drain pan. Changing oil is strangely satisfying to me.
@PowerStrokeTechTalkwARod
@PowerStrokeTechTalkwARod 4 года назад
Haha i see that so mannnny times....filters just covered in crud
@orville58
@orville58 4 года назад
No doubt you take pride in your job very respectable thanks for sharing
@PowerStrokeTechTalkwARod
@PowerStrokeTechTalkwARod 4 года назад
Thanks so much
@gmlover82
@gmlover82 4 года назад
Love your attention to detail. To me that puts you on top!
@PowerStrokeTechTalkwARod
@PowerStrokeTechTalkwARod 4 года назад
Thanks a milli my man
@jeridadams3121
@jeridadams3121 4 года назад
Something I do sometimes when the filter is going to make a mess is use a sharp center punch and punch a hole in the oil filter before you remove it. Let some of the oil drain out in a small stream before it makes a big mess.
@bryanmontgomery4050
@bryanmontgomery4050 2 года назад
I do the same but always make sure it breaks loose first.
@VOOODOOO37
@VOOODOOO37 2 года назад
wow, i'd say you are a Master mechanic, very clean, and detail orientated. Nice work.
@PowerStrokeTechTalkwARod
@PowerStrokeTechTalkwARod Год назад
Thnk u sir
@khoiktran
@khoiktran 4 года назад
Thank you, for the video. That is a lot of brake clean. Haha. I really like what you post. You should make some videos about doing mods to the trucks? As a 6.7 owner, it is nice to know issues your run into and how you go about repairs. My truck is getting up there in mileage 165k. Thank, thank , thank you
@whitechurchfarm
@whitechurchfarm 4 года назад
Good video. I have a 2000 7.3 with 145,000 miles. I wish my filter was that easy to get to. Keepm coming.
@PowerStrokeTechTalkwARod
@PowerStrokeTechTalkwARod 4 года назад
Lolololol
@Ricky90222
@Ricky90222 Год назад
this is the cleanest oil change that i've ever seen.. nice .. 👌👌
@PowerStrokeTechTalkwARod
@PowerStrokeTechTalkwARod Год назад
You should see the resta our work 💯
@Itsa_Mea
@Itsa_Mea 4 года назад
From the 6.9 & 7.3 days I have a tapered punch that I knock a hole in the bottom of the filter after I break it loose. Then the filter can drain and not puke all over you.
@PowerStrokeTechTalkwARod
@PowerStrokeTechTalkwARod 3 года назад
Lololololol
@Itsa_Mea
@Itsa_Mea 3 года назад
@@michaelbenoit248 I wouldn't waste the money on a coolant filter setup. The oil cooler tubes are huge in comparison to newer truck that tend to clog. Just service the coolant. For the cooler, I would also pickup the 4 large o-ring seals and reseal the entire assembly.
@birdlady2725
@birdlady2725 3 года назад
@@Itsa_Mea is the cooler a radiator? If so, those are tiny and clog easily. Not the tubes i think. Either way, safe travels!
@billbill8193
@billbill8193 Год назад
Very knowledgeable input thank you 🙏
@stevenfuchs2548
@stevenfuchs2548 4 года назад
As I have installed an Amsoil dual remote system my change is slightly modified. Oil quantity increased also. Still love watching and listening to your videos! I do also have the Fumoto drain valve!
@PowerStrokeTechTalkwARod
@PowerStrokeTechTalkwARod 4 года назад
Thanks appreciate it
@mustanggeek8333
@mustanggeek8333 Год назад
So how often do you change your oil and what kind of oil do you use?
@loganeley2342
@loganeley2342 4 года назад
Back to the basics I like it Arod
@PowerStrokeTechTalkwARod
@PowerStrokeTechTalkwARod 4 года назад
Thanks buddy!!!!! 😉😁
@billjones7918
@billjones7918 2 года назад
In depth. Great video
@PowerStrokeTechTalkwARod
@PowerStrokeTechTalkwARod 2 года назад
Thank u so much
@skynet2115
@skynet2115 3 года назад
That was a nice trick with changing out the oil filter without spilling a drop.
@PowerStrokeTechTalkwARod
@PowerStrokeTechTalkwARod 3 года назад
Not a drip!
@AustenARW
@AustenARW 4 года назад
Another great video! Always look forward to Friday evenings. :-) It would be cool to hear your thoughts on tuning sometime on these 6.7s.
@PowerStrokeTechTalkwARod
@PowerStrokeTechTalkwARod 4 года назад
Email me!
@johnnywalker5635
@johnnywalker5635 2 года назад
on my F250 what i use is a 5 gallon bucket that i buy from walmart. its $2.99 and its MADE IN THE USA. It stands up about 19 inches and i use it to collect the oil. I drive my truck a few miles to get it up to operating temp and I use my dash engine oil display to tell me when its hot enough. I think you get more contaminants and more old oil out when you do this versus cold oil like what you do. I do also make sure I let the truck sit for a good while to cool down so it doesnt make my plastic bucket super soft, but even still its hot enough or warm enough where it will flow out like water and bring the contaminants with it. I really like the height of the 5 gallon bucket. Makes for easy and clean jobs. I have a dedicated bucket for engine oil with a lid and keep it in a garbage bag, inside a cardboard box, and place it back on the shelf the next time. I take it to my county dump or a local business who has an oil heater in their shop, and they accept it for free. It never leaves the 5 gal bucket and never have to pour it in something else. I like my bucket and thats what I wanted to share lol
@PowerStrokeTechTalkwARod
@PowerStrokeTechTalkwARod 2 года назад
Dude, thanks for sharing & keepin' it 💯
@ewetuber186000
@ewetuber186000 3 года назад
Well done!
@carperdiem8754
@carperdiem8754 Год назад
Wow that is awesome accessibility. My buddy says he has to remove his passenger wheel and well liner to get to his filter on his 6.7 cummins
@maxtrehus602
@maxtrehus602 2 года назад
The attention to detail for just an oil change is outstanding. I would be comfortable having you do any work on my truck.
@PowerStrokeTechTalkwARod
@PowerStrokeTechTalkwARod 2 года назад
I have em come from all over the USA for me, PTT to fix their rigs!
@maxtrehus602
@maxtrehus602 2 года назад
@@PowerStrokeTechTalkwARod shoot I might be the next one to drive across the USA if I need more work done! Do you have a video showing the process for replacing the injector to valve cover grommet? I think I have a slow seep coming from there on either cylinder 1 or 2.
@PowerStrokeTechTalkwARod
@PowerStrokeTechTalkwARod 2 года назад
Shoooooooooot. Go to my 6.7 oil leak playlist. Its there! Email me if ya wanna get inline. Do you know about my kill switch kit??. EMAIL ME
@bradmcleod8193
@bradmcleod8193 4 года назад
I installed a fumoto drain valve so you can drain oil and filter into the same pan. The oil pan does drain slower but I have time to let it drain. But great video as per usual.
@PowerStrokeTechTalkwARod
@PowerStrokeTechTalkwARod 4 года назад
Thanks mister Brad!!
@Uncle_Fester24
@Uncle_Fester24 Год назад
Thanks! I did my first oil change today..didn't think I could do it and your video made it easy...next time will be even easier. But I will need a mid summer appointment to get all my aftermarket filters done by you pls.
@PowerStrokeTechTalkwARod
@PowerStrokeTechTalkwARod Год назад
I gotchu good buddy
@boomerps2
@boomerps2 11 дней назад
I just did both fuel filters today. It's just as easy as the oil change.
@Dmoore37
@Dmoore37 3 года назад
I appreciate the video.
@jasongriffin1127
@jasongriffin1127 Год назад
You're awesome!!
@dominicdemicoiii402
@dominicdemicoiii402 3 года назад
Niceeeeeeeee Video, Smooth what i have to say.
@alfredriley3771
@alfredriley3771 4 года назад
One thing I do is put the date on my oil filter with a sharpie. I have a 2016 6.7. Love the truck. Awesome engine. I only have 38,000 miles so she only gets a oil change once a year. Keep up the good videos😎
@PowerStrokeTechTalkwARod
@PowerStrokeTechTalkwARod 4 года назад
Thanks Alfred!!
@akbychoice
@akbychoice 4 года назад
Alfred Riley I use an electric engraver on the filter, plus the mileage.
@8256ronnie
@8256ronnie 4 месяца назад
Enjoy all the detail you go into on your videos eg wrench sizes needed what is needed to do the job. Saves from making trips up and down. 6:58
@everyonelovesfriday2045
@everyonelovesfriday2045 4 года назад
All I can say is Fumoto valve. Change my oil changing experience
@jimmycarnation
@jimmycarnation 2 года назад
TYVM love your videos!
@PowerStrokeTechTalkwARod
@PowerStrokeTechTalkwARod 2 года назад
TU!
@josephjohnson1025
@josephjohnson1025 3 года назад
Another a+ video. The extra at the end sets you apart from the wannabes. Keep up the excellent vids. Oh by the way how do we get them fancy stickers??
@PowerStrokeTechTalkwARod
@PowerStrokeTechTalkwARod 3 года назад
Got NEWER ones....email me!!!
@Mr42960
@Mr42960 4 года назад
I ave noticed the canister does hold waste oil and a lot of guys think they have a faulty filter that won't seal. Good tip with the cleaner and blow gun. I also grease what I believe may be the only fittings on the whole truck, if it's a four wheel drive. The front axle U joints still have Zircs, thank goodness. Can you tell me if the driveshaft splines have a recommended clean and re lube? Could have sworn I read one time that Ford had some kind of special grease recommendation just for that. Thank you for the video's.
@SuperDd40
@SuperDd40 4 года назад
Video's are great , never put any time lapse with horrible computer generated noise/music and its all good man.
@BarnStangz
@BarnStangz 4 года назад
Do'in that maintenance to make her last a looooong life! Nice job bruh! :D
@PowerStrokeTechTalkwARod
@PowerStrokeTechTalkwARod 4 года назад
Thanks broski 😉😉
@ricardorodriguez-se7tp
@ricardorodriguez-se7tp 4 года назад
Have you done any Radius arm bushings when you get one show us how, Hey everyone started with that Tri axle Mobile you do great videos Bro Keep them coming when i have time i get to watch the videos.
@PowerStrokeTechTalkwARod
@PowerStrokeTechTalkwARod 4 года назад
No i haven't my man, ill let ya know
@chrisbreidenbaugh3697
@chrisbreidenbaugh3697 4 года назад
All good advice. If you're on you parking pad, outdoors, the breeze will blow that oil all over the place...
@PowerStrokeTechTalkwARod
@PowerStrokeTechTalkwARod 4 года назад
Block it off with a make shift wall of card board
@donmartin7728
@donmartin7728 4 года назад
Why can’t all techs be this clean and thorough. Ford dealership I used to take mine to tried to get me to pay for stuff that had already been done. They did not look at the parts, they just looked at a computer screen of when the pickup was last in their shop.
@PowerStrokeTechTalkwARod
@PowerStrokeTechTalkwARod 4 года назад
Unacceptable
@khrisjames5880
@khrisjames5880 4 года назад
Saw that pan missing a bolt and I thought well at least I'm not the only one 😂 he's lucky tho mine is leaking out of that spot
@PowerStrokeTechTalkwARod
@PowerStrokeTechTalkwARod 4 года назад
I know right
@mattychamberlin
@mattychamberlin 4 года назад
Great attention to detail. I still can't believe you had no oil on you after spinning the filter off.
@PowerStrokeTechTalkwARod
@PowerStrokeTechTalkwARod 4 года назад
Geeeeeeeee, 😉
@smileyzr2
@smileyzr2 4 года назад
Good video. I like your attention to detail. Not many people take pride in their work anymore
@PowerStrokeTechTalkwARod
@PowerStrokeTechTalkwARod 4 года назад
I do with every job! IT IS A MUST or go home....😉✌🤝👍
@MyHMMWVaddiction
@MyHMMWVaddiction 4 года назад
For the oil filter I use a punch to drain the oil.
@kp__truckin
@kp__truckin 4 года назад
Thomas Burke yeah me to ,I use an railroad spike👍
@xforce687
@xforce687 4 года назад
I like cutting the wheels left and squeeze my arm in behind the wheel. That way I don't have to try and barely squeeze in the creeper, especially in those hot trucks where you burn yourself on the trans pan/exhaust!
@PowerStrokeTechTalkwARod
@PowerStrokeTechTalkwARod 4 года назад
Nice!!!
@DaFrostyG
@DaFrostyG 4 года назад
Think it might need a lower pan soon with that bolt missing, i usually punch a hole in the bottom of the filter, and break it loose ever so gingerly and it never gets on me.
@johnking2790
@johnking2790 2 года назад
I’ve been a subscriber for a little while now. I really enjoy your videos. Keep them coming 👍. ? Is there any real difference in changing out a 2002 F250 super duty block heater than say a 05 F550 turbo diesel?
@PowerStrokeTechTalkwARod
@PowerStrokeTechTalkwARod 2 года назад
Is same concept just different location
@akarish4435
@akarish4435 2 года назад
2018 6.7 with what I this is rear main seal or upper oil pan leak from them changing to the silicon.. any why I can tell for sure. love your channel man so much help keep it up.
@PowerStrokeTechTalkwARod
@PowerStrokeTechTalkwARod 2 года назад
Watch my upper oil pan & rear crank seal videos...
@PinkFloydSuperFan
@PinkFloydSuperFan Год назад
Love it. Now all you need to do is show an instructional video for owner how to clean console. 😂
@MbalmR97TX
@MbalmR97TX 4 года назад
Now that's a certified mechanic that gives a shit about his work!
@PowerStrokeTechTalkwARod
@PowerStrokeTechTalkwARod 4 года назад
Yeppppp
@MrBlurry2011
@MrBlurry2011 3 года назад
Great video, can you do another when the truck is warm? Also do you recommend having the oil cap off to speed up oil drain? Thanks.
@PowerStrokeTechTalkwARod
@PowerStrokeTechTalkwARod 3 года назад
Cap doesnt matter
@Itsa_Mea
@Itsa_Mea 4 года назад
For the guys doing this at home on their own trucks, for $25 a Fumoto drain valve is worth every penny. Necessity on many vehicles.
@gobdeep
@gobdeep 4 года назад
I’ve never heard of this before but what great idea. I’ll be scooping up one of these before my next oil change! 2014 F-250 6.7 here: fumotousa.com/results.php?make=19&year=2014&model=12669&makeid=FORD&modelid=F-250+6.7L+V8+Diesel+Turbocharged
@PowerStrokeTechTalkwARod
@PowerStrokeTechTalkwARod 4 года назад
Shit now i need 2 pick some up!
@Itsa_Mea
@Itsa_Mea 4 года назад
@@PowerStrokeTechTalkwARod this is the one I used on my 2011 Denali. IIRC u have a Yukon or Tahoe. Saves the mess bigtime. www.amazon.com/EZ-Oil-Drain-Valve-EZ-107RH/dp/B00HTV2NZ8/ref=mp_s_a_1_1?dchild=1&keywords=ez+107&qid=1587296309&sr=8-1
@kp__truckin
@kp__truckin 4 года назад
Yep I use them on every vehicle I’ve owned there the best🤙🏻👍👍👍✌🏻
@Mark-qb5ip
@Mark-qb5ip Год назад
Really wish i had seen this video before changing my oil the for its first change. The oil catch pan was large enough but the oil was warm, not hot, came out like a fire-hose. Then the catch bin for what ever reason did not keep up with the oil its one of those you can close up and take to a shop to dump... Last top of the oil filter dripped for 1.5 days... i finally cleaned it after figuring out what the issue was... Oh yeah and the stain in the driveway... yeah its new... but i was able to get lots of it up... still need to do more though... Thanks for the video... i wish i had seen it first... Damn it ARod where were you.... Oh yeah i was watching the mod vids... finally gt to this one... At least i have some new tails and a safe...
@PowerStrokeTechTalkwARod
@PowerStrokeTechTalkwARod Год назад
Thanks for stopping thru bud
@antidiz
@antidiz 4 года назад
I just drain the oil into one pan, wait for it to stop then slide it over to the filter. I've never had to use 2 pans. Never tug on the plug like that, eventually it could strip. Just snug it.. And never use a wrench to tighten the filter, it should only be used to remove it. Just hand tight.
@rngrxd_140
@rngrxd_140 4 года назад
Man wish you was my diesel tech. my dealership left my windshield wiper fill open and left my oil cap on my battery drove home and smelt oil through the ac vents somehow it didnt fall. Have 52k on my 2018 6.7 and tow everyday going strong with no issues.
@PowerStrokeTechTalkwARod
@PowerStrokeTechTalkwARod 4 года назад
Damn man that sucks. Good to hear she runnin strong. Wish i was ur tech tooo! 🤝👍
@SineMacula
@SineMacula 2 года назад
What's the whining sound the 6.7 makes at idle when around 195-200 degrees? Mine used do it all the time until I started putting Rotella T6 5w-40 and Hotshot stiction in it, now it only does it every once in a while. My dad has the exact same truck and his will do it, I have also heard others doing it at the gas station. It comes from the passenger side of the motor. Thanks for all your videos, extremely helpful.
@PowerStrokeTechTalkwARod
@PowerStrokeTechTalkwARod 2 года назад
Thx bro
@mjbskidoo
@mjbskidoo 2 года назад
Just watching some vids….. I would love to get some Motorcraft oil change stickers. 👍🏼
@PowerStrokeTechTalkwARod
@PowerStrokeTechTalkwARod 2 года назад
I got chuuuuuuu
@stevebeaulieu2617
@stevebeaulieu2617 6 месяцев назад
Nice video I wish I had see your video before doing my oil change. I did tight the filter with a socket and a 3/8 ratchet that you put at the bottom of the filter, and I tight it a bit strong I thing, do you thing it is easy to brake the treads on the rod where you screew your filter? I tight it down until the filter dont turn anymore. I feel scare a little bit, I wish the treads are solid. Thanks for your comment so you can help me sleep better :)
@rontopping2048
@rontopping2048 3 года назад
I use waste oil to wipe down oil pan and trans lines, lots of salt in new England
@akbychoice
@akbychoice 4 года назад
I put a vacuum on my oil fill tube, place the drain pan ( I use a 5 gallon bucket ) under the drain. Take the drain plug out, no oil will come out. Remove the vacuum and let the oil flow.
@PowerStrokeTechTalkwARod
@PowerStrokeTechTalkwARod 4 года назад
🤷‍♂️
@toms5212
@toms5212 4 года назад
Love the videos. I use a 5 gallon bucket for the oil pan, and an oil drain pan for the filter. Never spill a drop. Punch the old filter to drain for a few before I drop it since I’m diy and in no time crunch. Also, I wipe down the filter housing after I let it drain to get the oil off of it. Also ensures the old gasket didn’t get stuck there to cause a leak when I replace the filter. I saw a video from adept ape saying prefilling the oil filter isn’t necessary, so I don’t do it. Never had a problem. Thoughts on that?
@PowerStrokeTechTalkwARod
@PowerStrokeTechTalkwARod 4 года назад
......would you replace both your fuel filters, then start the truck and drive away without priming the system......🤔🤔
@toms5212
@toms5212 4 года назад
Good food for thought.....
@PowerStrokeTechTalkwARod
@PowerStrokeTechTalkwARod 4 года назад
Just sayin...
@Lovecamping290
@Lovecamping290 2 года назад
So New Super Duty Diesel 6.7 Owner, getting a 2022 never owned a diesel before, but drive bus for work, but still newbie SO my question is, what is the best brand of Oil and and filters to use, also fuel filters, I have heard Shell Rotella is the best, I want to maintain and look after this vehicle as hopefully this will be my last vehicle,, any information is greatly appreciated,,,thank you and love your vids, very detailed, and easy to follow, just wish I had a hoist lolol,,,,thank you again,,
@turboflush
@turboflush 2 года назад
Rotella is good stuff. Ford will tell you Motorcraft only. I run castrol usually. The correct oil is more important than the brand. Although walmart and amazon oil apparently meets the specs.. I wouldn't use them. Dont put small engine oil in your diesel.
@bajamedic
@bajamedic 3 года назад
What do you use to spray the battery terminals with?
@nbrowser
@nbrowser 4 года назад
WHOA! Rare bird...RWD only Superduty! All we see in my shop is 4x4s! No front diff is strange to see!
@PowerStrokeTechTalkwARod
@PowerStrokeTechTalkwARod 4 года назад
😉😁😅 yepp lotta 4 fitties like that
@nbrowser
@nbrowser 4 года назад
@@PowerStrokeTechTalkwARod Here it's all 4x4 be they 2/3/4Fiddies...never seen a RWD one at all, until this video to be honest...as I said...never seen one without a front diff.
@PowerStrokeTechTalkwARod
@PowerStrokeTechTalkwARod 4 года назад
Tooo funny
@KLRmurdercycle
@KLRmurdercycle 4 года назад
Can you do this outside with slight breeze next time? For immersion 😆 I can smell that brake cleaner🤪
@PowerStrokeTechTalkwARod
@PowerStrokeTechTalkwARod 4 года назад
Sure no problem....comin up with gail force winds
@larrya2344
@larrya2344 9 месяцев назад
Hello - I did exactly as you did - Drained when it was warm added the 13 quarts and my dipstick reads high no matter if the engine is cold, warm or hot - Should I re-do and drain the oil pan after the truck has sat overnight? would that remove more oil - For some reason I have to much oil after adding the 13 - Thanks
@blaineeden3607
@blaineeden3607 3 года назад
I always poke a hole in the bottom of my filters and drain them first then take it off. No mess every time no matter what. Takes a half a seceond. Just a tip if you never heard that one before.
@PowerStrokeTechTalkwARod
@PowerStrokeTechTalkwARod 3 года назад
Yea, i not doin dat 🤷‍♂️
@lylesathoffracing8l412
@lylesathoffracing8l412 3 года назад
I do that as well on anything that I do. I noticed on my 6.7 that I let the filter sit and drain for quite awhile and it just never seemed to quit. I spun it off a thread to let some air past the seal and it instantly made a mess. This was all while it was hot. I never had that problem with my 7.3.
@arcticmike2516
@arcticmike2516 4 года назад
Good Job! On another topic, P132B, what can you tell me about this?
@PowerStrokeTechTalkwARod
@PowerStrokeTechTalkwARod 4 года назад
Thats its probably gonna b turbo time....
@aheis1313
@aheis1313 3 месяца назад
Just got my first diesel it's a 2015 f350 thank you for the video I don't know if I caught what kind of oil you use, was wondering what you recommend. Thank you happy Easter and have an awesome day!!!
@PowerStrokeTechTalkwARod
@PowerStrokeTechTalkwARod 3 месяца назад
Hey pal, welcome. Same to you. I am a full sym 10w30 kinda guy
@aheis1313
@aheis1313 3 месяца назад
@PowerStrokeTechTalkwARod awesome thank you brother, so don't need Rotella or anything special?
@PowerStrokeTechTalkwARod
@PowerStrokeTechTalkwARod 3 месяца назад
@aheis1313 I mean u can use that...
@aheis1313
@aheis1313 3 месяца назад
@PowerStrokeTechTalkwARod nope I'll go with what you recommend you're honesty and integrity are awesome just heard different folks saying use Rotella only. Thank you for your time and wisdom much appreciated!
@danpark1992
@danpark1992 Год назад
@powerstroke tech talk is it better to drain oil when warm or cold?
@d.a3446
@d.a3446 2 года назад
Good video. Changing oil cold? Is that okay, I always thought it was recommended for the oil to be hot when changing?
@PowerStrokeTechTalkwARod
@PowerStrokeTechTalkwARod 2 года назад
Cold, means it's ALLLLLLL in the sump. Just takes longer but it's all been drained down
@turboflush
@turboflush 2 года назад
Many people and mechanics dont know the door sticker exists. Use the correct tires and pressure per the oem and tires will last a long time.
@daddydiesel5889
@daddydiesel5889 4 года назад
Does ford recommend to change the plastic 1/2 turn drain plugs in the early 6.7’s and current 2.7L and some 5.0L every time? We do at my shop every time because we have seen them leaking when they come back. Makes a mess on the fiber/cloth skid plate. Only use the ford plugs from our local dealer of course. Great video I have about 1,700 miles on my 2020 F350 tremor, first oil change will be soon.
@PowerStrokeTechTalkwARod
@PowerStrokeTechTalkwARod 4 года назад
Hell yea, I'm not totally sure. All the ones I've done done have never leaked. I never replace em either. I mean i make to sure to ean the plug well......just my 2cents
@daddydiesel5889
@daddydiesel5889 Год назад
We change them every time as well, get them from our local dealer. I know Dorman makes one but I don’t trust it.
@PowerStrokeTechTalkwARod
@PowerStrokeTechTalkwARod Год назад
Daddi comin bak🙌🙌🙌
@daddydiesel5889
@daddydiesel5889 Год назад
@@PowerStrokeTechTalkwARod blast from the past…Pluto baby
@arcticmike2516
@arcticmike2516 4 года назад
ARod, like your video’s. Notice you didn’t tighten the filter per your comment, but what appeared to be snug tightness. Was it tightened more off camera?
@PowerStrokeTechTalkwARod
@PowerStrokeTechTalkwARod 4 года назад
Yes it was in fact!!!
@PowerStrokeTechTalkwARod
@PowerStrokeTechTalkwARod 4 года назад
Thanks for stoppin by 😉
@dustinrowling7121
@dustinrowling7121 Месяц назад
What are your thoughts on the Amsoil bypass filter setup bmk 28 on a 21 6.7 Powerstroke? What are the factory oil pressures at idle and 1500rpm. My concern is the 1/2" ID hose with the kit is too small and will reduce flow considerably. Amsoil says the system is designed for 10gpm flow. That seems crazy low. The 6.7 Cummins flows 16-20gpm a 30-45psi. Will the BMK 28 reduce oil volume and or pressure to and from the main filter?
@PowerStrokeTechTalkwARod
@PowerStrokeTechTalkwARod Месяц назад
I had 1 they sent me but decided not to install it.
@jesusavila9763
@jesusavila9763 4 года назад
Total qts would be 13.5?
@triumphtriple95
@triumphtriple95 Год назад
Great video, only thing I would add is checking brake fluid and topping off as needed.
@PowerStrokeTechTalkwARod
@PowerStrokeTechTalkwARod Год назад
Checking, why would you be topping...brake fluid should NEVER be topped off unless the system is open.
@triumphtriple95
@triumphtriple95 Год назад
@@PowerStrokeTechTalkwARodold school father thought me that as the brake pads start to wear, the fluid level will go down. And to always keep it near the full line.
@PowerStrokeTechTalkwARod
@PowerStrokeTechTalkwARod Год назад
......so now you do brakes & push the pistons back in & ALL the brake fluid is NOW gonna push out all over the place. Its suppose to go low. If you had a leak you wld have NO brakes
@JohnSmith-lw2bm
@JohnSmith-lw2bm 3 года назад
Hot 5w-40 rotella t6 flows like water. There’s no going faster than what it can drop out of the engine.
@mikeschwindt7407
@mikeschwindt7407 3 года назад
You make it look to easy. I have a 2019 f250 and every time I change my oil I end up with at least half a quart on the ground. Lol
@judgeparker4236
@judgeparker4236 Год назад
How do you get the DIC to show the exhaust filter percent? Have a 15 with the upgraded dash and that's not an option.
@PowerStrokeTechTalkwARod
@PowerStrokeTechTalkwARod Год назад
Gotta hse a scan tool
@danpark1992
@danpark1992 Год назад
@power stroke tech talk do you recommend the fumoto oil drain plug or any other plug?
@PowerStrokeTechTalkwARod
@PowerStrokeTechTalkwARod Год назад
Sure those are ok
@danpark1992
@danpark1992 6 месяцев назад
@powerstroke tech talk what do you spray battery terminals with?
@PowerStrokeTechTalkwARod
@PowerStrokeTechTalkwARod 6 месяцев назад
Black spray paint
@michaelfish4513
@michaelfish4513 2 года назад
I use my 2016 F350 for towing my travel trailer and boat and only put on about 3000 miles a year. How often should I be changing the oil and filters? Thanks
@PowerStrokeTechTalkwARod
@PowerStrokeTechTalkwARod 2 года назад
Once a yr
@danpark1992
@danpark1992 Год назад
@powerstroke tech talk what do you spray your battery terminals with?
@PowerStrokeTechTalkwARod
@PowerStrokeTechTalkwARod Год назад
Black spray paint
@dennis7814609
@dennis7814609 4 года назад
How bad did it typewriter? I have found that not getting the full quart in the filter leads to that. I also find mines quieter overall running 15-40
@PowerStrokeTechTalkwARod
@PowerStrokeTechTalkwARod 4 года назад
No type writer noise...not supposed to have 15w40 in there....
@imtryanmybest
@imtryanmybest 4 года назад
I noticed that the dash said exhaust filter 40%. Is there a way to tell how full the exhaust filter is on a ‘16 F350 Lariat?
@PowerStrokeTechTalkwARod
@PowerStrokeTechTalkwARod 4 года назад
You need to watch this!!!! Yes the built Ford tough one has it too!! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-AzBvktY4VkQ.html
@JT.0915
@JT.0915 3 года назад
I have never seen someone use so much brake kleen. Good for you though thats what separates the good mechanics from the hacks
@PowerStrokeTechTalkwARod
@PowerStrokeTechTalkwARod 3 года назад
MY REPAIRS DO NOT LEAVE DIRTY, PERIOD!🙋‍♂️
@richardarques6139
@richardarques6139 3 года назад
Lots of cold oil still in that engine?
@traviscolvard4015
@traviscolvard4015 3 года назад
On 6.7l diesel why would you have to prime the oil filter? I never have on any of my powerstrokes going back to the 7.3 and 6.0l. Thanks in advance
@PowerStrokeTechTalkwARod
@PowerStrokeTechTalkwARod 3 года назад
Coffee can filters ALWAYZ get pre filled...fuel/oil etc..
@adamt3611
@adamt3611 4 года назад
13 quarts, dang! To think I thought 6 was alot for the little 2 liter turbo in my VW...
@eldiabloelbandito9550
@eldiabloelbandito9550 4 года назад
13 quarts is nothing! My 6.0 L powerstroke with a amsoil oil bypass filter takes 17 quarts!
@jonholt201
@jonholt201 4 года назад
I start to check the oil around 12 quarts , usually it's full by then, I'm guessing I'm not getting all the old oil out. The specs say 13 but if I do that you got oil above the fill mark on the dipstick. Even after running the truck and priming the filter.
@viaswords4888
@viaswords4888 4 года назад
I reset the 2nd trip metre to keep track of oil miles/hours
@birdlady2725
@birdlady2725 3 года назад
Great idea!
@eldridge201
@eldridge201 3 года назад
First video I watched of yours. So, I worked as a tech at a couple Ford dealerships and at the first one, I worked on the first and second generation 7.3 Powerstrokes but have a question about these newer ones. Do these newer 6.7 Powerstrokes also hold roughly 2 quarts of additional oil in the HPOP and as such, is there a way to remove this oil with a suction gun? I will admit, I don't recall personally removing the 2 quarts from the HPOP in the old 7.3 when we did oil changes at the dealers (I don't think anyway) but there are plenty of discussions online for doing so. Obviously, if you're changing oil but not actually changing the 2 quarts in the HPOP as well, then you're not actually changing all of it and as such, the new oil will be contaminated with the old oil immediately upon startup. So, do you not change this on the newer ones and if so, why not? Or, is there just no way to change this? Or, do you change it on the older ones as well or just not worry about it? I know it takes an additional 5 to 10 minutes of time but just curious.
@PowerStrokeTechTalkwARod
@PowerStrokeTechTalkwARod 3 года назад
Brother, this isnt high pressure oil.....common rail 😶 them days is long gone.....
@eldridge201
@eldridge201 3 года назад
@@PowerStrokeTechTalkwARod summbitch that's a fast response. I thought these still hit 30,000 psi roughly or more like the old ones. No? Hmmm. I wasn't aware. Either way, if there is still oil in the HPOP, wouldn't you want to remove it? I know we can go round and round on this argument but if there is indeed an additional quart or two still in the HPOP when draining the crankcase, that's "old oil" that will get mixed with the new oil. I know it's not much but still, it's there. Now, get to work. ;-)
@PowerStrokeTechTalkwARod
@PowerStrokeTechTalkwARod 3 года назад
🤣🤣🤦‍♂️🤦‍♂️🤦‍♂️ THESE DONT HAVE HIGH PRESSURE OIL PUMPS.....ITS HP FUEL BRO! Old ones never hit 30,000. 3800 psi maybe....all these new 1s are 30k psi. U drain the oil thats it, done...no gun sucker needed
@johnthemechanic2937
@johnthemechanic2937 Год назад
I would like some of those stickers
@culbyj3665
@culbyj3665 3 года назад
1:54 mark freeze screen and tell me this I have a 2016 F350 6.7. That one bolt above the drain plug on the right side has so much soot that appears to be a leak. Im talking about the horizontal bolt not the vertical pan. bolts The vehicle has only 22k mileage wise. Im a tad disappointed . I know trucks leak but at 22k? That cant be normal. Any thoughts or am I being picky. The truck hasnt had any strain its practically a daily driver to and fro work. All changes tho Ive only had 2 or 3 regarding oil and that was done by the dealer. Thoughts? Or am I being picky because this truck is barely broken in mileage wise. Every other area is dry or stain free. Edit: that last part about brakleen and blowing the filter makes me think u work at my dealer because my filter is spotless after thousands of miles besides what I stated above on the housing bolt!!
@PowerStrokeTechTalkwARod
@PowerStrokeTechTalkwARod 3 года назад
Sry pal
@jerryknorr679
@jerryknorr679 4 года назад
Good video ARod , went on Amazon and bought a valve to go in place of the bolt. Got my 5 gallon jug, small hose to go on the end of valve in to 5 gallon jug turn valve on and wait no more mess in driveway no more wife yelling at stain in driveway. One ? I always fill the filter with to the top is that ok. As always ARod thanks
@PowerStrokeTechTalkwARod
@PowerStrokeTechTalkwARod 4 года назад
Yepp yepp!!!
@jerryknorr679
@jerryknorr679 4 года назад
@@PowerStrokeTechTalkwARod forgot to ask any chance could I get any of those oil stickers thanks
@PowerStrokeTechTalkwARod
@PowerStrokeTechTalkwARod 4 года назад
Yeah bud email me a reminder 👍👍👍
@MichaelHartGSP
@MichaelHartGSP 3 года назад
Anything you can do to keep your truck from having the "typewriter" noise after an oil change?
@PowerStrokeTechTalkwARod
@PowerStrokeTechTalkwARod 3 года назад
No
Далее
New 2020 6.7 Powerstroke | Fuel Filter Change - HOW TO
17:27
2011-2016 F250 F350 F450 Trans FLUID change
9:26
Просмотров 120 тыс.
2022 Ford F250 6.7L Powerstroke Oil Change (How To)
13:27
Спорткар с двумя моторами 😜
0:35
Сравнил два перфоратора🤯
0:29