Ford C6 Transmission-Replacing shifter shaft seals

Подписаться 1,9 тыс.

Просмотров 25 тыс.

50% 1

Hello RU-vid! Thank you for your interest in the channel and welcome back if you've visited before. Please subscribe! like, comment and turn on the notifications so you don't miss any new content.
Follow along on instagram! see what's going on with the trucks prior to videos being out.
@bumpside_builds
Support the channel through PayPal tip jar! Anything is greatly appreciated.
paypal.me/pool...
Todays video is going to be on replacing the shifter shaft seals on the C6 transmission in the 74 F350. Ive never attempted anything like this so I'm a little nervous but confident I can figure it out! To get to the seals we will need to drop the transmission pan, drain all the fluid out and remove the valve body.
I ordered the replacement seals off of eBay for about 10$. The main seal for the transmission is a press fit into the casing and the outer seal is a little rubber O-ring on the outside for the kick down linkage arm.
One step closer to taking her on a first drive!
#Ford #Dentside #C6Transmission

Опубликовано:

5 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 37

@fomoco173 Год назад

Nicely done! I just pulled the C6 out of my 74 F100 and am in the process of tearing it down to rebuild it.

@AJsGarage Год назад

Thank you! Have you rebuild a C6 before? Thought about giving it a try but I’m actually going to switch the truck to a 4 speed

@fomoco173 Год назад

@@AJsGarage yes, done a few.

@douglaselser2440 Год назад

Man, really appreciate this. Could not get placement of kickdown correct and your detail really helped

@AJsGarage Год назад

I’m glad it helped, thank you for watching! Got everything back together?

@douglaselser2440 Год назад

@@AJsGarage I did indeed. Thanks for asking. This was only part of the problem though...pulled the tailshaft cover and the governor was completely disconnected!

@josephmclovin9763 Год назад

When you dropped the bolt while installing the valve body- I laughed and said, that’s me

@AJsGarage Год назад

Usually I won’t leave stuff like that in the final edit but maybe I’ll start putting them together at the end of each video

@Jacobswalk1 4 месяца назад

There is an easy way to keep from making a mess by using a cheap manual transfer pump. They come with long hoses that will fit in the fill tube. Shove it to the bottom and stick the other end in a jug and start pumping. there will still be some fluid left in the pan but if you're careful, no mess.

@AJsGarage 4 месяца назад

I never thought of that, it’s a good way to get most of the fluid out. The drain plug makes it a lot easier now. Thank you for watching!

@TheThirdWheel618 2 года назад

many people on here might know about this but I always had leaks on my transmission pan gasket especially on some of these trucks if it had a big block they had the motor leaning backwards I used a lube locker transmission pan seal. that was the best seal that I've ever used on anything and I will use them for life from now on whether it be timing cover oil pan valve cover transmission pan they even give you the torque sequence on the box for the c4 C6 I just changed my fluid and my gasket last night love that gasket it's called a lube locker check it out.

@AJsGarage 2 года назад

Ill have to check it out. I have actually used lube locker before, they make great stuff. I have a lube locker gasket on the differential in each truck seals up great and no leaks.

@garyszuckerman 3 года назад

Torque the FILTER bolts 40 to 60 INCH pounds and the PAN 12 to 16 FOOT pounds (95 INCH pounds) if it is a factory steel type..Torque the valve body to the case 95 to 125 INCH pounds..These numbers are out the 1972 Ford Overhaul manual for the C6..I have found it best to Torque the PAN to 10 foot pounds and then RETORQUE to 12 foot pounds AFTER THE TRAMSMISSION WARMS UP. .

@AJsGarage 3 года назад

Thank you for the information. Definitely going to go back and torque everything down to the proper amount. Especially the pan. I plan on changing it out.

@things971 3 года назад

@@AJsGarage do you have the part number for the seals?

@AJsGarage 3 года назад

@@things971 No I just ordered them off of eBay. I’m sure if you just search for C6 shifter shaft seal it would come up.

@yeboscrebo4451 3 года назад

I need to do this too. Thx

@AJsGarage 3 года назад

Thank you for watching! My seal for the kickdown linkage is still leaking slowly so I need to find a different o-ring.

@lipton4453 3 года назад

Hi you don’t need to remove the filter unless your going to clean it out just all the 3/8 head bolts to drop the valve body your doing great tho

@AJsGarage 3 года назад

Thank you, Thanks for watching!

@landyndonovan9958 3 года назад

Sorry to be so offtopic but does anyone know of a way to log back into an Instagram account?? I was stupid forgot the account password. I would love any tips you can offer me

@blakekaleb3124 3 года назад

@Landyn Donovan instablaster ;)

@landyndonovan9958 3 года назад

@Blake Kaleb i really appreciate your reply. I found the site on google and Im trying it out atm. I see it takes a while so I will reply here later when my account password hopefully is recovered.

@landyndonovan9958 3 года назад

@Blake Kaleb it worked and I finally got access to my account again. I am so happy! Thanks so much you saved my account :D

@dandyman132 3 года назад

Almost worth buying a baby pool to use for the mess....lol. Buying stock in baby pools right now! LOL

@AJsGarage 3 года назад

Seriously! No matter what I always spill transmissions fluid. That’s actually not a bad idea haha.

@ghostbuster9776 2 года назад

The only video on youtube I could find....PLEASE ADD kickdown shaft replace in description....I broke my kickdown/ tv shaft and could find a single replacement video online....yours was the first

@AJsGarage 2 года назад

Glad my video was able to help out! We’re you able to get yours swapped out?

@thomaswilliams1602 2 года назад

Where did your get the o-ring and. Washer for the shifter? I have the pan gasket and filter gasket, but I can’t seem to find the parts you installed in this video. TIA

@AJsGarage 2 года назад

I found them on eBay, not sure of the part number but the one I got came with a rear seal also. I believe I just searched C6 shifter shaft seal and it should come up. Thank you for watching!

@cesargutierrez4476 Год назад

I can't seem to find those parts too. You mentioned EBAY but no luck

@dandyman132 3 года назад

Where do you get your music for your channel. Ive been getting my royalty free from a site. Just wondering if you pay or if its free. Ive been using Adobe Rush to edit but the music selection is not very good.

@AJsGarage 3 года назад

The music I use is already on my MacBook. In IMovie, I’ve been trying to figure out how to use something different. There’s some good little clips but sometimes I’m editing video clips to fit the music length.

@jeogriffith 3 года назад

6:38 damn would have loved to see how to seat that

@AJsGarage 3 года назад

Can’t remember why I didn’t get a chance to record it but use some ATF so the seal and surface aren’t dry. It’s a cramped space so I just tapped it very lightly all the way around until it seated. If I had to do it again I’d get a small block of wood to apply even pressure