No video :(

Ford Edge Easiest Way To Change Spark Plugs/Intake

Подписаться 118 тыс.

Просмотров 66 тыс.

50% 1

Today I've got a few sweet things I want to show you to get ahead of the parts store. Along with showing you an easy way to remove Ford Edge Intakes. Removing the Intakes on your Ford Edge won't take too terribly long nor will removing the Ford Edge Intake require any special tools. I'll guide you through all the steps to removing your Ford Edge Intake quickly and easily. I want to also talk a few common problems when doing a spark plug installation on your Ford Edge
Sweet Money Saving Tips N Tricks!
7 Tips to Saving Gas in your Car!: • 7 Tips to Saving Gas i...
How to Remove a Broken Dipstick: • How to remove a broken...
Car Vibrations and Shaking, How to Fix it: • How to Find What's Mak...
How to Remove a Stripped off Lug nut: • How to Remove a Stripp...
Reach out to us!
Clay's AC and Auto Repair: / claysacandauto
The Clay way Patreon: / theclayway
The Clay Way Twitter: thenewclayway?lan...
FOR THE BIGGEST AND BEST PARTS CATALOG, CHECK OUT DORMAN PRODUCTS AT: www.dormanproducts.com/pages/...
⭐⭐⭐⭐If you liked the video and want to show your support, you can use any of these links to purchase ANY ITEM you normally would off of Amazon and we get a small commission with no extra cost to you! Make sure to complete orders through the links! Thank You!
6 pc NGK G-Power Spark Plugs compatible with Ford Edge 3.5L V6 2007-2011: amzn.to/3tQrNI5
CRAFTSMAN Mechanics Tools Kit with 3 Drawer Box, 216-Piece: amzn.to/3a0aZqI
DEWALT 20V Max Impact Driver Kit, 1/4-in: amzn.to/3y0vDRJ
5 Pieces Magnetic Telescoping Pick-up Tool Kit: amzn.to/3knxckI
Magnetic Screwdrivers Set with Case, Amartisan 42-piece: amzn.to/39sTSxT
Join this channel to get access to perks:
/ @sharpcarco
00:00 - 01:55 Intro
01:55 - 9:04 Intake Removal
09:04 - 17:18 Spark Plug Installation + Parts Store Tips
17:19 - 1823 Thank You! / Have a Great Day!
The Clay Way nor makers,producers and installers will not responsible for ANY damage that happens to your Vehicle or if we are incorrect about any of my information contained in this or any of our videos ,any accidents that happen while you’re performing the procedures that We explain And you perform or anyone else perform. The Clay Way will not be liable in Way shape or Form. By viewing content you are agreeing to these terms.
This video is property of the Clay way Channell and root 66 productions. No portions of the video can be copied and re-distributed in any shape or form without written approval from root 66 and or the Clay way Channell!
Products that I use quite often.
PB blaster penetrating oil
Lisle tools
Snap-on tools
Matco Tool‘s
Dorman Products

Опубликовано:

7 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 77

@sharpcarco 2 года назад

⭐⭐⭐⭐If you liked the video and want to show your support, you can use any of these links to purchase ANY ITEM you normally would off of Amazon and we get a small commission with no extra cost to you! Make sure to complete orders through the links! Thank You! 6 pc NGK G-Power Spark Plugs compatible with Ford Edge 3.5L V6 2007-2011: amzn.to/3tQrNI5 CRAFTSMAN Mechanics Tools Kit with 3 Drawer Box, 216-Piece: amzn.to/3a0aZqI DEWALT 20V Max Impact Driver Kit, 1/4-in: amzn.to/3y0vDRJ 5 Pieces Magnetic Telescoping Pick-up Tool Kit: amzn.to/3knxckI Magnetic Screwdrivers Set with Case, Amartisan 42-piece: amzn.to/39sTSxT

@EveryDayTrucker Год назад

Just know this. If your coils are blown up and it’s running bad, you may replace them and it still runs bad. Mine did that. I sent the computer off to get it rebuilt and reprogrammed, bought OEM plugs and coils, now it runs like a brand new car! Well worth doing yourself. I paid a total of $700 including shipping for everything versus the $3k-$4k they wanted at a dealership! Thanks bro!

@carlhungus69 Год назад

Where did you send the computer? I'm looking to do this right now

@elizabethesquivel5540 2 месяца назад

Where did you send your computer

@zakr7429 Год назад

What a great vid man. Great work, very thorough and entertaining. Keep up the hustle Chief

@CarnageDrew Год назад

All data has no guide on how to take the intake off that little bolt in the back was stopping it from coming off this was really helpful thanks for the info🙏🏻

@FZH13 6 месяцев назад

Thank you very much for this video! I changed my edge plus out this morning and this video was a huge time saver! Much appreciated!

@davestewart9146 2 года назад

Always keep your pushy clean and well lubed, a good functional pushy is a happy pushy lol, great video 👍😁

@christianheller551 4 месяца назад

Thanks for this video. Happy Easter.

@rockysenatore9682 2 месяца назад

Thanks, saved me a lot of time figuring out the little pushys and whatnot 😅

@terencewelch3408 2 года назад

thanks Clay. Great video. I appreciate your motivation and confidence .

@sharpcarco 2 года назад

You’re very welcome Terrence we’re very happy to have folks like you here

@k.t.1520 3 месяца назад

Thank you for your videos. They are extremely helpful. Much appreciated.

@rkrouse22 Год назад

Glad you explained all clips. Some would have been a PIA to figure out. Thanks

@rotarythread 2 года назад

Good video Clay, I didn't skip btw :D

@johncoleman5388 6 месяцев назад

Thanks for posting this video! I came here to see the trick to removing the connectors. I was going to use a flat key that I use to unlock our cheap indoor doorknobs. I did, however, see that you were discussing spark plug tips, so I fast forwarded to the part where you were discussing gap sizes. A daily driven non-performance vehicle has an acceptable gap range. The larger gap sizes are used for economical purposes, think "green energy folks". Smaller gap sizes are more efficient, but MAY affect fuel consumption a little. Also, Bosch platinum plugs at my local autozone are $4.99 a piece. The iridium plugs are useless on these specific ecoboost engines because these engines require 30k mile or so spark plug replacements. I bought mine two years ago with 66,930 miles and now at 78,000 miles I checked the spark plugs, due to hesitation issues, and they have already been replaced and are a little fouled, which is apparently typical with these engines, that is it is inherent due to its design. Thanks for posting such videos!

@sharpcarco 6 месяцев назад

😂😂😂 that is really hilarious that you use the exact same spark plugs to describe the job you’re doing and I use them exact same spark plugs to describe the job I’m not doing.

@wish2fish37 Год назад

Thanks…Wish would have seen this video before doing mine.I accidentally broke that little plastic clip you did the one close up on you push in to release the one hose.Didn’t realize you pushed in on it to release it.Not sure if they can be replaced? Also do you remember if that hidden bolt under throttle body that’s hard to get to is shorter than the coil bolt?They looked very similar but need a new one and can’t find it listed in parts diagrams to get a number for it.Found number for the coil bolt.

@kevinmartin4787 8 месяцев назад

Thank you so much!

@shannonheredia1123 8 месяцев назад

Your the shit bro def helped me out n save hell dough thanks

@davidbloomberg9494 Год назад

Did you change the PCV valve on that Edge V6 ??

@vegachicago 8 месяцев назад

Hey, don't change a thing. You think the same way I do. Get your mind out of the gutter, so mine can float by!!!! Love the channel. Later

@smk5pj Год назад

Helpful indeed. What is the actually completion time for that spark plug? Labor cost are ridiculous 😒. I'm needing mine done. My 2010 mileage is 150K. My mechanic labor fee is over $500😩. Please advise...ta~ta

@sharpcarco Год назад

Do it yourself pay yourself for the $500 go buy something that you wanted it was $500….

@smk5pj Год назад

@@sharpcarco doing myself makes sense if I have the means 😏. I got another referral & the bill shouldn't top $600 including the boot. Thanks for the video. Visuals help...ta~ta

@Codyjrt Год назад

Awesome Awesome Awesome.

@sharpcarco Год назад

Your comments are always appreciated Eric and very welcomed thank you brother I was just looking at your keychain the other day.. I’ve got a funny little short idea I think I’m gonna make about it

@antoniogonzales134 5 месяцев назад

I put 4 qts oil since dealer change last month? But no smoke or leaks on ground???

@davecee4230 2 года назад

This is not on topic at all but I'm swapping a 3.7 for a 3.7 in a Jeep Liberty and the torque converter fits the motor but it doesn't fit the tranny is there any way around that does anybody know I'm in a bind

@sharpcarco 2 года назад

You need to give me a little bit more description……. When did this happen? and why is it happening is it not pushed in correctly where you changing the engine? And you didn’t have it seated properly?

@mysliwya 5 месяцев назад

I had to take the throttle body off to get to that back mount bolt behind it

@CharlesLease-ei1ee Год назад

It’s a reusable gasket long as it’s not crushed you can use it and torque your intake down

@CharlesLease-ei1ee Год назад

Use the dielectric grease on the tip of the rubber boot. You don’t need a lot very little and do yourself a favor. Make sure that vehicle is cold when you pull the spark plugs because you will rip the threads out of the head and when you put your spark plugs back and get gold any seas not the silver Put a little bit on the threads before you put it back in the engine and do your self a big favor torque your spark plugs crush that washer, because if not, you’ll get misfires on start up do you won’t know what you did wrong and you’ll be paying double you’ll be taking it to a technician to figure out what is going on all because you and torque to spark plugs get that crush washer, crushed

@anthonytrupia4010 Год назад

Timing issue? I do know for a fact that the water pump is exposed to the engine so maybe there's water getting inside the block.

@robertfogarty3253 5 месяцев назад

i have become a 2013 owner i have about 100 miles one cylinder started missing 1st trim on HI way

@niveklor1456 7 месяцев назад

2013 ford edge exhaust straigh pipie,mufffler delete

@wayeboyz4525 Год назад

Hi you seem like you know a lot about cars my Ford edge 2011 headlights went out I changed the fuse and the bulb and made sure the switch was working fine. Do you think it’s wiring issue and if yes is it expensive?

@sharpcarco Год назад

I wish I knew as much as you thought I knew about it. Unfortunately, the other thing that it could possibly be is the light sensor or even the gym module itself, which is the module that controls the lights regretfully I don’t have a lot of experience with that particular problem so I’m very sorry to say that wouldn’t be able to help in that situation

@wayeboyz4525 Год назад

@@sharpcarco thank you for replying, turned out it was eBay’s fault. The wiring on the headlights were wrong, but I appreciate you replying

@bigtank7293 2 месяца назад

Thanks Bro! This was MONEY!!💪🏾🔥

@sharpcarco 2 месяца назад

Thanks tank I love it when people write nice things to me. I greatly appreciate you welcome

@clintwitman9730 5 месяцев назад

Why did you end up taking the valve cover off?

@sharpcarco 5 месяцев назад

Because I was doing Timing I said that in the video, but you must’ve missed it when you were skipping through….

@tonyrunyon375 Год назад

Thumbs up anyway

@CharlesLease-ei1ee Год назад

Hears were a lot of people get shafted they think their year getting OEM from advance AutoZone you’re not that is not an OEM plug that is advance brand OEM plug. If you look at the coloring they are different. It’s an aftermarket stamped advance plug. It’s not directly from OEM look at it real close and you will see it.

@bobbywalter5320 7 месяцев назад

Mom and Pop are gone where I am at.

@nytewindz Год назад

Great video. Ford, you suck for making it this hard to change the damn spark plugs.

@thomasaerback3371 Год назад

I would give a lot for 5 minutes with the person that decided to put that hose on the back of the intake…

@MirceaBoise 5 месяцев назад

You didn't show how to remove the back sparkplugs....

@sharpcarco 5 месяцев назад

Seriously…. You needed me to show you how to remove the back spark plugs after I showed you how to take the intake off come on you should probably take that to the shop. I guess you’re not cut out for this kind of work unfortunately I hate to say that….

@MirceaBoise 5 месяцев назад

IF you're gonna do a job, do it right and show all steps. I guess you just can't do that. I've never done this on an Edge but have on other vehicles. For you to say I am not cut out for this kind of work, its just you speaking out of ignorance and stupidity. Don't insult the people that watch your videos unless they insult you. Learn some manners.@@sharpcarco

@sharpcarco 5 месяцев назад

So I should sit there and make videos showing you how to do the same step over six times? That seems stupid to me all the spark plugs come out exactly the same way…. Nobody wants to watch that crap.

@AH-mj1rd Год назад

its not easy if you have big hands, i got so many cuts and bruises changing the plugs on mine. like patting a crazy cat.

@stantonfriedman 5 месяцев назад

The Spark Plug Gap is .051 not .501 ..... .501 is 1/2 inch

@sharpcarco 5 месяцев назад

Ty captain obvious we appreciate you

@stantonfriedman 5 месяцев назад

Funny ...... the video I watched after yours said the gap was .501 to @@sharpcarco

@YesterdaysKing Год назад

You’re dad now. Okay?

@12pleasureuuu Год назад

😂

@bobbywalter5320 7 месяцев назад

🤔 Why would thinking about my cat be mind in gutter

@gearhead-442 4 месяца назад

Gap is .051, not .501. You're going to have a hard time setting your gap to .501

@mecanicomecanico5444 Год назад

3:34 luis

@CharlesLease-ei1ee Год назад

If you want to teach somebody to save money, teach them right a person that’s never done it do not tell them disconnect the negative battery because there’s a big chance that they will slip and use some other type of tool and smack metal and shorts up mouth always disconnect the negative cable first and yes, on some of the vehicles the battery is buried, but on the left-hand side of the vehicle near the strap tower is a ground strap to the body disconnect it if you can’t get to the battery but if you wanna some show somebody do it correctly

@sharpcarco 5 месяцев назад

😂😂😂😂 intended affect….. initiated. Thank you so much for making this comment….

@dollydawn007 3 месяца назад

Why be gross

@Anonymous-it5jw Год назад

The continual sexual innuendo will cause you to lose subscribers, casual viewers and advertisers. Is your type of sexual humor worth the loss of revenues from advertisers and subscribers? The technical information is important but is off-set by your off-color comments.

@sharpcarco Год назад

To me, it is. I want people that are here to understand that I’m here to help them if they don’t want to help and they don’t like my sense of humor, there’s millions of other, RU-vid channels to watch.. most of the time my continent is different than others. I’m OK if people don’t like me you’re not gonna please everyone all the time and when people wake up and realize that not everybody’s going to be happy with what you do you can just be you. If I was worried about it, I would do it . I wouldn’t have as many followers if it wasn’t for the things that I do if I just did generic videos that were straight to the point, I wouldn’t have followers I would have clickers…. Nobody would know me or my character they were just know that I make good videos.. I want to make good videos, but I want to make videos my way which is the reason that the channel is called the clay way. It will either catch on or it won’t either way I’m happy with who I am what I do, and it may not be for you.

@michaelschroeder3800 10 месяцев назад

You talk to much just get to the point

@denofrobbers8845 13 дней назад

If you don't want me to skip through your video, don't yap so much.

@the43beatle Год назад

Keep it mechanical dude. Too much innuendoes toward women's body parts. Too much additional info not needed to change plugs.

@sharpcarco Год назад

Well my channel isn’t for everyone. I try to add some humor in it. You could just go watch somebody else’s videos. I don’t bother me I make 2/10 of a cent doing this. I’m not here for everyone that’s why it’s called the Clay Way and not the Markway

@stevebrooksjr Год назад

. 5 is 1/2 inch lol I think u ment. . 051 1/2 inch vs 50 thousands is a lot wink 😉

@saywhat351 Год назад

Show me where the bad man hurt you little boy...lol you probably get mad at babes in bikinis on the wall too...just click off and walk your sensitive ass to the repair shop...dude is helping all of us for free...

@sharpcarco Год назад

Amen at least I’m trying some people you just cannot help