Тёмный

FORD EDGE PCM NO COMMUNICATION DIAGNOSIS & FIX 

ADVANCED LEVEL AUTO
Подписаться 151 тыс.
Просмотров 87 тыс.
50% 1

In today's video we take a look at a 2013 Ford Edge w/ 4 cylinder 2.0l Ecoboost engine. According to the repair shop the vehicle has been sitting for about 2 years with a bad transmission. The shop recently replaced the transmission and test drove the vehicle. The next day when the customer came to pick up the truck, it would'nt start! They scanned the vehicle and found the PCM was not communicating. After checking the grounds and connections, they decided to call me to take a look. Follow along as I take you step by step through troubleshooting a bad PCM.
!!!Please don't forget to "LIKE" the video & "SUBSCRIBE" to the channel!!!
********************Tools used in this video!**********************
Power Probe III w/Case & Acc - Red
Check it out here! amzn.to/3NjPJuV
20 Piece Back Probe Kit
*Check it out here! amzn.to/3zyGOSD
LAUNCH X431 PRO3S+ Bi-Directional Scan Tool
*Check it out here! amzn.to/3ao2Cpi
************************************************************************
If this video helped you in any way and you would like to donate. Please
Click the link to Donate! paypal.me/advancedlevelauto
Thank you so much for your support!
**********************************************************************
Visit our Amazon store here www.amazon.com/shop/advancedl...
to shop for our channels recommended tools and gadgets!
**********************************************************************
If you enjoyed this music then checkout Epidemic Sound here! www.epidemicsound.com/referra...
***********************************************************************
*You can email your questions and concerns to advancedlevelauto@gmail.com
Disclaimer:
Due to factors beyond the control of Advanced Level Auto, I cannot guarantee against improper use or unauthorized modifications of this information. Advanced Level Auto assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Advanced Level Auto recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Advanced Level Auto, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Advanced Level Auto.

Авто/Мото

Опубликовано:

 

13 авг 2022

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 249   
@josephgronkiewicz328
@josephgronkiewicz328 Год назад
Great video thank you for posting that. I would assume that after replacing a PCM even if it is pre-programmed, the vehicle would need a perimeter reset.
@ADVANCEDLEVELAUTO
@ADVANCEDLEVELAUTO Год назад
That is correct. I forgot to mention this. The shop had a capable scan tool for that.
@fredsalter1915
@fredsalter1915 Год назад
What is a perimeter reset?
@josephgronkiewicz328
@josephgronkiewicz328 Год назад
The body control module has the key code and hit that the PCM needs in order to start the vehicle. The perimeter reset basically syncs the PCM to the body control module for the key coding.
@fredsalter1915
@fredsalter1915 Год назад
@@josephgronkiewicz328 Is it "perimeter reset" or "parameter reset"? Thanks again!
@palomopalomo9755
@palomopalomo9755 Год назад
Muy bien gayo eres una chingonada... Veo tus videos desde SLP mexico ... Hope you can read that ... I know u can ... Y dale pa'elante pa!
@davidgriffin14
@davidgriffin14 Год назад
Dude you explain things better than any other RU-vidr or teacher. Thanks for taking the time to share your knowledge.
@factsalways7749
@factsalways7749 Год назад
Gets me everytime: “I’ve got the keys right here in my hand. . . “ Eric, says that on every lesson. 😂👍🏾
@ADVANCEDLEVELAUTO
@ADVANCEDLEVELAUTO Год назад
Old habbits are hard to break 😂
@20thcentlimited
@20thcentlimited Год назад
I was in this repair business for 28 years and I can see that you really have a grasp on what you are doing, BRAVO!
@user-yw6ei8yt4q
@user-yw6ei8yt4q Год назад
You don't have to apologize. We appreciate your work to video these diags. Love your detail in all this, we learn much from this.
@The_Redkween
@The_Redkween Год назад
Eric, don’t think that we long-time viewers don’t notice that you’ve really stepped up your editing game lately, on top of your already stellar diagnostics methodology. Great work!
@88camaroman
@88camaroman Год назад
Man those videos never get old, if that's not something you deal everyday you forget... So watching those just keeps you in the loop
@Mr2004MCSS
@Mr2004MCSS Год назад
Great video. You are always so through in your diagnostic approach and explain it in a way that is easy to understand. This is one of my favorite diagnostic channels.
@ThunderbirdRocket
@ThunderbirdRocket Год назад
Thanks for COACHING us with such dedication !! The passion is evident in everything you do !!
@marathonfreak67
@marathonfreak67 Год назад
Outstanding diagnostic walkthrough. It's something special watching a pro do their job well.
@stevec5657
@stevec5657 Год назад
It must feel great to realize you made the right call. Between your YT channel and word spreading around town about you, I think you'll always have a steady stream of appreciative customers. Great job 👍
@surdo132
@surdo132 Год назад
No apologies needed . I'm grateful for the knowledge you share. Thanks
@judih.8754
@judih.8754 Год назад
Excellent communication about your thought process. You're really thorough. Thanks for posting.
@roxanneabbott8424
@roxanneabbott8424 Год назад
Always a pleasure seeing you Eric no matter how long we wait! It's worth waiting for!
@gregjones8501
@gregjones8501 Год назад
Always useful and entertaining content on this channel! Thanks for taking the time to educate us Eric!
@amjadzidaoi4011
@amjadzidaoi4011 Год назад
Big thumbs up for your thought process and being confident in condemning the pcm. Also, thanks for your time to upload those amazing videos which I can say 100 percent very informative and educational.
@buntnik
@buntnik Год назад
One of the most informative videos out there. EXCELLENT!
@orlandot3944
@orlandot3944 Год назад
Dang I always see you fixing some crazy problems many me mechanics would run away from no doubt. Hope you charge accordingly, good work ain't cheap boss man.
@sambitar8448
@sambitar8448 Год назад
DEAR SIR, YOUR EXPLAINATION IS THE MOST IMPRESSIVE LOGICAL ANALYSIS, WHICH IS VERY HELPFUL AS EVER. THANKS A MILLION FOR YOUR EFFORT.
@arthurfricchione8119
@arthurfricchione8119 Год назад
Eric thanks for sharing . Video was extremely informative and I much appreciate how you walk us through the wiring schematics. Stay safe and well Artie 👍
@mikechiodetti4482
@mikechiodetti4482 Год назад
You did your job and were 100% correct. Don't apologize! Thank you for the update and the "tips and tricks" especially for using 12 volts through the test light at the VREF connections checking for shorts to ground.
@ripjones5294
@ripjones5294 Год назад
Excellent video. Ultimately had to replace the PCM in my 2008 Explorer Sport Trac. For dealer had the car, and they were unable to get a PCM from Atlanta, so I found one in Jacksonville, FL, and it too, came pre-programmed from the rebuilder. The dealer was surprised that I could find one, and they were happy to install it. Worked like a charm.
@hpelisr
@hpelisr Год назад
Great work Eric, that was a lot of wire's and ground checking. Thanks
@zthom992
@zthom992 Год назад
So so SO useful! Running into same issues with my 2010 Edge and have been lost until I found this video. I am now subscribed and will be checking it all out. Thanks for the time and editing!
@dansaver8247
@dansaver8247 Год назад
Terrific video and diagnosis. Thank you.
@Athan5594
@Athan5594 Год назад
Thank you for the step by step diagnosis with explanation..
@alialix2076
@alialix2076 Год назад
Always thanks Eric ... Always we thank you brother.
@timgruver5932
@timgruver5932 Год назад
Continually 100% amazed at your expertise ! I know it takes years to get where you are with your skills.👍👍 sad there’s no one in Amarillo like you.
@chicodorosario1787
@chicodorosario1787 Год назад
Godlike diagnostics right here!
@babatunde3992
@babatunde3992 Год назад
Thank you for helping me to understand Automotive😊🥰
@richard1835
@richard1835 Год назад
Another great diagnostic video by ADVANCED LEVEL AUTO.
@john7017
@john7017 Год назад
Eric, great video ! Thanks for sharing.
@raviautoscanning
@raviautoscanning Год назад
Thank you for sharing. Good diagnostics.
@ubuntuscorpious
@ubuntuscorpious Год назад
Just discovered your channel with this video. Awesome work! Everything was so well explained. Will be watching more.
@odishoodisho4904
@odishoodisho4904 Год назад
Great as always thanks for shearing your information
@samuelkiragu6613
@samuelkiragu6613 Год назад
rt here in kenya your channel is the best learning platform
@dustydustydusty
@dustydustydusty Год назад
ispr. Remember that. And now I have to rewatch part of the video. Excellent as always.
@ADVANCEDLEVELAUTO
@ADVANCEDLEVELAUTO Год назад
Yes. I will remeber this this acronym the next time I see it. Thanks for watching!
@thamiralqurashi8604
@thamiralqurashi8604 Год назад
very informative , thanks Eric
@filicruz7566
@filicruz7566 Год назад
Appreciated everything you do for us thanks .,nothing to apologize I'm simptly grateful to you.
@beats_and_cars
@beats_and_cars Год назад
I wish you all the best my brother, hopefully things have gotten better (I stumbled on your page and watched the ls460 flood nightmare, and the shop closing video). I have an ls460L, and was looking to buy another (LS460L or LX570). Thank you for all your help. Amazing work. God Bless.
@normandfogarty3505
@normandfogarty3505 Год назад
Awesome troubleshooting!!
@alexisr.cabreraortega9900
@alexisr.cabreraortega9900 7 месяцев назад
Great Vid. Súper demostration 👍🏻👍🏻
@rickybailey7123
@rickybailey7123 Год назад
That's the same checks that I do great job showing 👏 just been about 10 months sense last 1 I checked was making sure I hadn't forgotten about anything like u said u can never be 100 % on knowing!!
@johnbortiehblabi
@johnbortiehblabi Год назад
Thank you for the videos you make I Learn a lot from it God bless you 🇬🇭
@lustfulvengance
@lustfulvengance Год назад
One of the most painful and valuable lessons I've learned while doing electrical troubleshooting in my career was because of voltmeters and led test lights! Now I usually use my test light that I installed a fog light bulb in that pulls like 4 amps if I'm testing power supply or ground circuits and it has never failed me!
@petergarofolo9385
@petergarofolo9385 Год назад
Great video. No need to apologize.
@76ameer
@76ameer Год назад
Nice informative video as usual. I wish more and more videos from you.
@mikefoster3547
@mikefoster3547 Год назад
Great video by the way, you broke it down very well. Thank you for sharing.
@mamoudbah-ws3lf
@mamoudbah-ws3lf 7 месяцев назад
You are too good man thank you for your time and help to us
@r0bstafford126
@r0bstafford126 Год назад
Great vids watching from NEW ZEALAND
@alaautotonics4403
@alaautotonics4403 Год назад
Great video 👍 very very good explanation thank you so much for your efforts 😊😊
@kingsleycollins6730
@kingsleycollins6730 Год назад
nice Work man..like you always do👍
@AzeezOverseas
@AzeezOverseas Год назад
Awesome work 👍
@trublue2319
@trublue2319 Год назад
That was good diagnosing
@jimkillen1065
@jimkillen1065 10 месяцев назад
Thanks for the videos ..i appreciate the information
@siskiyouwoodsmann4279
@siskiyouwoodsmann4279 Год назад
Erick, great video as usual and I think you should be an instructor as you are very clear and concise when explaining your test procedures…very easy to follow👍
@bendiaz1805
@bendiaz1805 Год назад
Great work
@johnr.803
@johnr.803 Год назад
Wow! What an education!
@harvrindrsingh
@harvrindrsingh Год назад
Hi from dubai. Thanks for great information videos
@ahmedalhimaidi9804
@ahmedalhimaidi9804 Год назад
Good job thanks for the information
@jimpetty2961
@jimpetty2961 Год назад
great video quality is better than quantity nice job very thorough😁
@philautomotive8529
@philautomotive8529 Год назад
Well done nice work with the snap on scope its one of my favorites
@shamessun
@shamessun Год назад
Thank you…. The 5v short sensor to ground test that is a good test…. Thank you
@jesusbolivar9178
@jesusbolivar9178 Год назад
Great video, keep up the great work
@jayman1860
@jayman1860 Год назад
Awesome video
@luismarty1685
@luismarty1685 Год назад
Thanks brother. You are a consumate pro.
@danielgarcia9095
@danielgarcia9095 Год назад
Thank you for your knowledge 🙏...
@robertmedina6875
@robertmedina6875 Год назад
Great video Eric!! Thanks Bro!!
@julianarodriguez3635
@julianarodriguez3635 Год назад
Good information
@williamrivera6818
@williamrivera6818 7 дней назад
This guy gets 10 stars
@antoniorodolfo9805
@antoniorodolfo9805 Год назад
Master in action
@antoniorodolfo9805
@antoniorodolfo9805 Год назад
What is it
@CrazyPetez
@CrazyPetez Год назад
Good show👍👍👍
@amarabdelli487
@amarabdelli487 11 месяцев назад
Thanks for sharing
@user-jx8jb1vq3y
@user-jx8jb1vq3y Год назад
I know I'm way late on this but another great video thank you
@webduster1
@webduster1 Год назад
Great job
@jgeorges3061
@jgeorges3061 Год назад
Eric, AWESOME work as always brother thanks for sharing.cheeeers
@ADVANCEDLEVELAUTO
@ADVANCEDLEVELAUTO Год назад
Thanks for watching
@curiosity2314
@curiosity2314 Год назад
Good job.
@SamHelsby
@SamHelsby Год назад
Great video! I like the idea of testing for shorts to ground in the reference circuits that way but I always got told never to do that because going from battery positive with a test light to a reference circuit could spike the module by putting 12 to a 5V outlet, I guess it all depends on the internal circuit board design really
@JohnDoe-sp8zg
@JohnDoe-sp8zg 5 месяцев назад
excellent job of taking us through your diagnotic strategy and performance. loved the explanation using the diagram and splicing in of text to indicate what you were going to do next. really like that you have not overloaded the engine bay with leads and other equipment (that can be distracting and confusing). conducive to understanding where leads go and and understanding ojo no manufaturer would agree with your tool with the pin test. did you forget your ase terminal test kit? ignore the typos
@JavierCastroCabrera
@JavierCastroCabrera 2 месяца назад
excelente video me ayudo al 100%
@stevietheg2580
@stevietheg2580 Год назад
17:44 a headlamp bulb drawing 15 amps is kinda off there. 15 amps @ 12v = 180 watts, regular headlamp bulb (499/477/H7) would be almost 4.6 amps @12v (55w) but yea I would totally be checking those main grounds with a high current test lamp especially if they carry the current to ground the injectors and/or ignition coils but if it's just a sensor ground then yes a low amp incandescent test light is suitable but each to their own, obviously everything else looked to a bad computer (which it was), I've been burnt by assuming a low amp test light (~200mA) lighting a ground before calling it good but under a 'normal running load' it was bad causing stalling but again in the video this was a KOEO no comm requiring very little draw
@robertmobileman8304
@robertmobileman8304 Год назад
awesome video , cheers man
@lupedelacruz4152
@lupedelacruz4152 Месяц назад
Thanks for sharing amigo
@Tkz9000
@Tkz9000 Год назад
Don't need to apologize. Troubleshooting customers cars is the most important thing.
@Zparker31
@Zparker31 2 месяца назад
Very Nice....
@iiro173
@iiro173 Год назад
Really really good video 👍
@ADVANCEDLEVELAUTO
@ADVANCEDLEVELAUTO Год назад
Thanks for the visit
@jordysandino6577
@jordysandino6577 9 месяцев назад
Hola primo . Bonito vídeo como siempre. Apenas lo volví a ver ya lo voy viendo 2 ves es el mismo video lástima que no le puedo dar mas like solo una vez se puede 😂
@jlwmrblack
@jlwmrblack Год назад
Very smart man keep up the great work Eric.Love watching your videos,I see you don't do no bmw's they're are one of the worst car ever.I'm just saying
@Avenueroaddetailing
@Avenueroaddetailing 5 месяцев назад
Hey Eric, Great videos thank you Love watching the videos about how programming keys id like to get into this , what’s the best bet to get learning up key programming, other than watching all your videos which I do
@magogon70
@magogon70 Год назад
You are awesome!!!
@benjaminlevi7792
@benjaminlevi7792 Год назад
Good job thanks
@DukeeDemba
@DukeeDemba 6 дней назад
Thanks so much
@johnwayne9993
@johnwayne9993 Год назад
Thanks!
@reypanaligan3304
@reypanaligan3304 8 месяцев назад
Verry helpfull
@halhadher8435
@halhadher8435 Год назад
so amazon job bro.
@tedvandell
@tedvandell Год назад
Good info
@ADVANCEDLEVELAUTO
@ADVANCEDLEVELAUTO Год назад
Glad it was helpful!
@SOLOOJESUCRISTO
@SOLOOJESUCRISTO Год назад
Thanks for your teaching and be blessed in Jesus Christ 🙏
@gilron9585
@gilron9585 Год назад
Thanks as usual for the great video. How much is a new or remanufactured PCM in this truck ? Eric's time is also money :)
@williamrivera6818
@williamrivera6818 7 дней назад
You the man
@aleskyfinis1025
@aleskyfinis1025 Год назад
Good luck 👍 videos
Далее
CHRYSLER TOWN & COUNTRY NO COMMUNICATION NO START
26:10
💋🧠
00:38
Просмотров 61 тыс.
5 Secret Tips to FIX ANY CAR
25:51
Просмотров 80 тыс.
FORD ESCAPE NO COMMUNICATION CAN BUS DIAGNOSIS
38:15
Просмотров 103 тыс.
How To Diagnose A Faulty ECU With No Communication
6:50
DANGER RANGER (Barely Runs...super RICH?)
19:52
Просмотров 58 тыс.