Ford Escape - Battery Replacement With Cowl Off - DIY Fail

Подписаться 893 тыс.

Просмотров 121 тыс.

50% 1

In this video I have a look at a customer's 2015 Ford Escape that was towed in. The customer tried to change their own battery, but it took a turn for the worse when they tried to get the negative battery terminal off. In a previous video • Ford Escape Battery Re... I showed you how I replace the battery in these vehicles and the comment section was filled with suggestions of removing the cowl instead of removing the air cleaner housing. I thought I'd use this opportunity to show you that method and discuss one of the pitfalls you may encounter along the way.
-Enjoy!
If an SMA Video has helped you out please consider giving using "Patreon" to help support us. The videos take real time to create and pull us away from real work that pays our bills. CLICK HERE: / southmainauto
CHECK OUT OUR "SMA SWAG" STORE! Go on Teespring and get your very own SMA merch!
teespring.com/stores/the-sma-...
If you don't like Patreon feel free to use the "PayPal Me" link: www.paypal.me/SouthMainAuto
The South Main Auto Amazon Store:
www.amazon.com/shop/southmain...
AES Wave Automotive Diagnostic Tools: www.aeswave.com/cart.php?m=af...
Thank you for all the continuing support!
--Eric & Vanessa O.
Feel like sending some swag to SMA because you love the videos but don't know where to send it?
Just ship it here:
South Main Auto Repair
47 S. Main St
PO Box 471
Avoca, NY 14809
Disclaimer:
Due to factors beyond the control of South Main Auto Repair, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. South Main Auto Repair assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. South Main Auto Repair recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of South Main Auto Repair, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained.

Авто/Мото

Опубликовано:

10 апр 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 731

@cincy9381 2 месяца назад

Ford must have heard everyone talking about how stupid the Chrysler wheel well batteries were. And they said... Hold my beer!

@Dirtyharry70585 2 месяца назад

GM put the battery and or ECM in the front fenders years ago . But Yukons go one step further and stick it under the second seat inside passenger compartment.

@harrywalker968 2 месяца назад

yur not suposd to own a car more than the battery life these days.. i have a tdci focus. first thing i thought was... cowl.. air filter is a pain.. oh, focus is 2008, dead batt when bought as owner couldnt get under the hood. common prob. i fix. new catch, long screw driver.. then, it needed cam , crank seals, so bought all the front crap. gave to '' mechanic'', as busy at work, he fkt it.. timing.. they break rockers, nothing else.. $300 to fix. AGAIN.

@Boga217 2 месяца назад

@@harrywalker968you need to figure out how to type a paragraph. This makes almost zero sense..just a bunch of jumbled jibber jabber...

@user-th7im1fy6z 2 месяца назад

😅😂 facts

@efil4kizum 2 месяца назад

@@harrywalker968 No hacks. zero Fukks...

@John-dp3ln 2 месяца назад

Really admire that you didn’t hack on the poor guy who tried to replace his battery in this really poorly designed car. Not one negative comment and none deserved in this instance. He had all the parts, bagged the fasteners, little carnage, smart enough to quit before damaging stuff. This is the #1 concern of DIY, getting over my head and towing mess to professional. 100% class, good video.

@tomking1890 2 месяца назад

Poor design is right, and that is being kind.

@BigPapa_2001 2 месяца назад

This is what happens when you hire engineers right out of college with 0 real world experience.

@SouthMainAuto 2 месяца назад

You got to know when to hold them and you got to know when to fold them. 🤷‍♂️

@andrewhigdon8346 2 месяца назад

@@BigPapa_2001no this is what happens when bean counters shortchange the engineers and tell them to “make it work” while they are staring at the impossible.

@tallpaulsynd 2 месяца назад

@BigPapa_2001 The only way to get experience is to get hired. I made some dumb mistakes as a new engineer. Fortunately I had an engineer as a manager and senior engineers to help catch mistakes.

@Thecrazyvaclav 2 месяца назад

A video with what looks like decent weather outside, and lawnmower man isn’t in the background making noise. Must be the first time ever.

@andrewkennedy9704 2 месяца назад

9:40?

@edwardhugus2772 2 месяца назад

He must not have the SMA video schedule memorized for this year yet. I'll bet that was HIM on the phone trying to find the info.

@waynesanders1406 2 месяца назад

Instead he's hammering down a new front porch.

@stephenbell9257 2 месяца назад

16:00 Lawnmower man is flying his helicopter today instead

@SouthMainAuto 2 месяца назад

Oh give him time ... Just give him time 😏

@DrLee65 2 месяца назад

Eric kills me every time he says; "both of these Nutz," in that high pitch voice, I almost spilled my cup of coffee, 😂

@TarZan49 2 месяца назад

What is that from? A movie?

@GoldCountryTrapping 2 месяца назад

@@TarZan49 I dont know but my kids always laugh like crazy when he says it.

@mochs3869 2 месяца назад

@@TarZan49 I tried posting a link but it got deleted. Just Google the term - it was originally from a Dr Dre rap album, but was later even used as a presidential election candidate in 2015 by a 15 year old Iowa boy who was fed up with only the choices of Clinton or trump. That's when it really became mainstream.

@meenie79 2 месяца назад

You misspelled BOFADeez!🤣

@peterallen4331 2 месяца назад

FORD. Lets use 2 wiper motors instead of 1 and throw in a computer module to monitor their indexing, we will connect this to the CAN bus so you can diagnose when your wipers through a code. What could be simpler.

@John_Ridley 2 месяца назад

Dictated by the requirement to have the arms move independently. Design decision.

@John_Ridley 2 месяца назад

Also parts cost is lower.

@simonilett998 2 месяца назад

*throw*

@mannypuerta5086 2 месяца назад

Escape. Aptly named with hidden message. I certainly would want to escape all that silliness by not buying that. My wife’s Volvo has the battery in the same place, but Volvo conveniently placed an access panel for battery removal so one doesn’t have to deal with layers of panel plastic, wipers or airbox removal. Ford, if Volvo can do it, you can do it.

@joeyg9967 2 месяца назад

Its crap

@cgmoog 2 месяца назад

I worked in environmental consulting and we always said "The solution to pollution is dilution" glad to see SMA sharing that pearl of wisdom.

@carsten4594 2 месяца назад

That's why I pour my pollution down the drain😅

@deanmckee1385 2 месяца назад

I have heard gas well people say that

@nv1493 2 месяца назад

The ridiculousness of "modern" vehicles is truly amazing.

@akshonclip 2 месяца назад

You can thank the EPA for that

@kevinsavard5998 2 месяца назад

@@akshonclip Yes like the old Chrysler Sebrings take the tire off and the fender liner to even see the battery

@COBRO98 2 месяца назад

@@akshonclip EPA is the reason we even have ECM's in vehicles, worst thing that ever happened to the auto industry. Vehicles used to have about 60 wires and now they often have 1600+.. that's 150lbs..

@MonkeyDelicious 2 месяца назад

They must have backwards thinking engineers.

@SouthMainAuto 2 месяца назад

It's what keeps me going. I have a love hate with it 🤷‍♂️

@albaker2938 2 месяца назад

As a Ford tech, I've tried battery replacement on these Escapes both ways: air cleaner removal and cowl removal. A lot of the guys in my shop disagree with me, but I find the cowl removal method so much easier.

@kendavis1198 2 месяца назад

🤷‍♂😎...

@hypocriticalharambe8274 2 месяца назад

I can do the air box method in 30-40 min or more likely less I don't time it from just doing it so often just like intakes off a V6 toyota book is 2.6 hours I do it in 1.5 for tune ups and the likes even on mini vans but I did 20 of them in 5 weeks same with the dreaded 3.6 pentastar oil coolers that leak.

@imtheeastgermanguy5431 2 месяца назад

I had similar cases where I had to choose. Pulling the wipers can be tricky sometimes especially when you don't have access or not the right tools for it like I didn't had. They also very rusted together. It was often a nightmare working on this junk

@originaldeadclown 2 месяца назад

thats how i do it every time when i get one i am also unfortunately a ford tech lol

@originaldeadclown 2 месяца назад

@@hypocriticalharambe8274 wait are you saying it takes you 30-40 minutes to do the air box method because brother it takes me under 10 minutes to do the cowl method so i just want a lil clarification its written in a way that im not sure what you mean lol

@thk7513 2 месяца назад

I can't believe you cleaned the factory paint off that connection! 😱

@waynesanders1406 2 месяца назад

Now it's going to start rusting the car frame from the inside out *smh*

@cquay3 2 месяца назад

Fluid Film! I went to the local HDep for some W D. And there was the Fluid Film. I got a can. Why? Because that's what Eric O uses on SMA! They should sponsor the man.

@donniev8181 2 месяца назад

Same here!

@funbags6471 2 месяца назад

They should 1000% sponsor him, I love fluid film but shes pricey I am sure he'd enjoy a sponsorship from them.

@threeputtpar6927 2 месяца назад

They did sponsor him for a while, sent him a case of cans and a couple of T-shirts.

@kevinrenn9123 2 месяца назад

I had never used fluid film until till I started watching SMA now I use it all the time, (imitation, flattery, ect)

@gregeconomeier1476 2 месяца назад

As I recall, they did "sponsor" SMA some time ago. I think they gave SMA a case of product.

@bigbearvenom6145 2 месяца назад

Baking soda dissolved in warm water neutralizes out battery acid, and it will totally stop corrosion process, then flush with hot water and let air dry real well leaving all parts super clean.

@donniev8181 2 месяца назад

Water and a brush does the same thing

@bigbearvenom6145 2 месяца назад

@@donniev8181 no it doesn't the hidden places that brush can't reach will still be corrosive with acid residue and the baking soda acts like little scrubbers that come in contact with that residue that neutralizes it and cleans without touching it. Moisture in the air just reactivates it everytime and causes to corrode metal parts again, again, and again. Who wants to go in and scrub with brushes and work around acid with a brush. Go ahead.

@chekelley6861 2 месяца назад

You really think a solution of baking soda and water has enough neutralizing power to do all that? 😂 LET LOOSE THE ARMCHAIR EXPERTS!

@charlesgroover1095 2 месяца назад

@@chekelley6861Not sure where you got your Chemical degree from but apparently you missed a lot in elementary class. Baking soda does neutralize battery acid. Find a building with a lot of books in and ask for help. Have a good day.

@markanderson2904 2 месяца назад

@@donniev8181No, it doesn't. Baking soda neutralizes the acid. Water only dilutes it.

@mikemaccracken3112 2 месяца назад

Cable orientation does matter Eric. It goes by vehicle build date. Cars built on odd days the small cable goes on the bottom of the of the clamp 😂😂😂. Thanks for the video.

@NBSV1 2 месяца назад

I can’t believe you cleaned that ground with a clockwise rotation!! Grounds require a counterclockwise rotation so the pixies flow better.

@dougkubash8673 2 месяца назад

Good tip on the wiper position. Thanks!

@richards1960 2 месяца назад

Many Ford vehicles have this battery terminal problem, dope slap to the engineer who designed it.

@Doing_it_right_the_first_time 2 месяца назад

It wasn’t just one engineer, who did it, but rather a team of them who all raised their hand and said “yeah, that looks like a good idea!“… So it’s not like one engineer snuck that design into the build of the car but rather a whole team of them!

@jptrainor 2 месяца назад

Blame it on the sales and marketing dept who give the engineering dept their priorities and who place zero value on maintainability because it doesn't sell cars.

@johnchambers12 2 месяца назад

If it is like anything else out of the engineering department, nobody in the office ever worked on cars, the one guy designed it and asked for everyone else’s opinion and the just looked and said yes that will fit! Never knowing the front of the car has to come off to change it out. Best Designs Ever.I like it in the trunk since your not giving us a real spare tire there is plenty of room!

@martinburns342 2 месяца назад

I had a 2016 Escape. The wiper blades will automatically put themselves into the correct orientation. I could never remember which one was on top when lifting them to wash the wind screen. It will move both to the vertical position then the correct bottom one will return home first.

@akshonclip 2 месяца назад

The original motorcraft battery is what causes this.

@danielesilvaggi 2 месяца назад

I use a gallon of water and a 1/4 cup of baking soda and it neutralizes the battery acid. Always have on hand in case. Great video. Thank you.

@volvo09 2 месяца назад

The sizzle is satisfying too

@Diogenes-ty9yy 2 месяца назад

I use some ammonia solution in a spray bottle with a scrub brush to clean my battery trays, just my preference.

@ranger178 2 месяца назад

note to self don't buy cars where you don't see battery in easy to get at location.

@harrywalker968 2 месяца назад

bmw, merc ect. you need to put the batt number, serial, into the comp, or it dont start.. plus theres a fuse on the + lead that blows if you crash.. then it calls the morgue.. for you..

@Boga217 2 месяца назад

@@harrywalker968 no they will start but problem is battery life will be shortened. The program is for charging voltage, it increases charging as battery ages.

@StephenFasciani 2 месяца назад

@@Boga217can confirm knew of someone with an Audi that needed that and it wouldn't charge proper.

@mungtor 2 месяца назад

then you're not buying much these days. the harder part is resetting the BCM to let it know there's a new battery and to relearn the charge state.

@DaddyBeanDaddyBean 2 месяца назад

65-66 Mustang has the battery tucked under the passenger side fender, oriented fore & aft, with the terminals close to the sheet metal. No problem in ordinary use but scary to charge or jump. 67-68 rotated the battery 90°, crossways to the car, to bring the terminals out where they're more accessible. And some aftermarket fabricating genius built a battery tray that has the crossways 67-68 style on top, but bolts up to the 65-66 holes underneath. I like keeping things original for the most part, but when something comes along that is a clear improvement over the original and could have been done that way in the 60's, I'm all for it.

@erniedeguzman9720 2 месяца назад

Eric O states "The solution to the pollution is dilution"... Brilliant!!! 😂😂😂

@Mtechthewise 2 месяца назад

Baking soda and water for the neutralization of the acid is good too, but doesn't rhyme as well.

@ShainAndrews 2 месяца назад

Respectfully... that is chemistry 101. I can think of no other phrase that is as common as it is.

@jgreitz 2 месяца назад

Coffee and Dr. O!! Thank you for the entertainment and education all in one session.

@joeyg9967 2 месяца назад

Please find a way to add your "enhance, enhance, enhance!" statement when you are enlarging the view in more of your videos please. Makes me laugh every time you say it!! Your content and knowledge is some of the best on You Tube. Thank you for doing what you do.

@Buzzberski 2 месяца назад

Regarding your discussion about conductive vs. dielectric (non-conductive) Sanchem's No-Ox-Id "A" is a conductive grease that does a great job of inhibiting corrosion. Used in power plants for decades.

@GarnConstructionInc 2 месяца назад

A dirty windshield always helps with wiper alignment! Thanks Eric

@patrickladue2762 2 месяца назад

I paint a dot on the windshield for that.

@moe41278 2 месяца назад

Good to see you torqued the T25 to factory specs😅

@colinmccormack1728 2 месяца назад

The wiper position tip is useful for when you change the blades as well.

@TXAG81 2 месяца назад

Down here in Texas, Corrosion Technologies makes a great line of products. Corrosion X HD (green can) is the product I use on my saltwater bay boat and is great for battery terminals. The regular Corrosion X (red can) is great for electronics and I spray this over my outboard power head to prevent corrosion under the cowling.

@walkertonheights 2 месяца назад

If you pull the air cleaner box you get to check your air filter at the same time. Which is a really huge bonus, well maybe not huge. LOL.

@gregwarren8583 2 месяца назад

Eric, I have used the baking soda and water routine (as a tech, owner, and Teacher/trainer for over 50 years (It is the best method). There should have been a hole that the tab on the negative ground point is attached. Looks like the bolt went in at an angle. As they say "just saying"! I too like to clean off the ground points, but I cover it with a thin film of dielectric over it to reduce oxidation chances, especially with current monitoring.

@scottnusser6232 2 месяца назад

I say the customer took a fit on that battery 😂I usually do it by taking air cleaner out, but the cowl method lets you clean all the leaves and such out. Thanks for the tip on wiper arms did not know that. Lucky I do it the way you said anyway 😂❤ Good show. Nose pickin joke was hilarious dude😂😂

@SteveMelissaMcAdams 2 месяца назад

One thing you can look at also on that style of wiper system is to reference the windshield or windscreen for the folks across the pond. Most now come with wiper position marks on the bottom either dots or slash marks in them. I've installed autoglass for 30yrs now and those marks have been a godsend on the more modern vehicles especially the ones like these with independent motors

@denniswright8949 2 месяца назад

I have to thank you for a tip. I was changing blades on my mower and one would not come loose. First was the WD40. No go. Then I remembered your trick of applying heat. A couple of minutes with a canister of MAP gas and the nut turned right off. Thanks. I would have been stuck without this trick.

@AdmiralDG 2 месяца назад

Its amazing what heat can do for a stuck fastener. Or any rust welded metal surfaces!

@dave_n8pu 2 месяца назад

Thanks for trying to protect us viewers from ourselves.

@andrewruble7706 2 месяца назад

Another wisdom filled adventure. Eric I am always impressed that you do your best not to dis the DYIer. It is fortunate that you have worked on many vehicles so in piecing the puzzle back together you not only make the customer happy but teach all of us arm chair mechanics a thing or two. Thanks for sharing.

@jptrainor 2 месяца назад

Of course you apply dieleftric grease *before* putting the connector on. The grease gets squeezed out where there is metal-on-metal contact but remains in any gaps and voids where corrosion would otherwise start.

@alexandergunaka666 20 дней назад

I live in Chicago, I’m not a scientist. However whatever they mix with the salt doesn’t care about your grease.

@wesleypulkka7447 2 месяца назад

Eric, glad I don't own that unit but your tutorial is the bomb! My 90s Nissan pickup and Camry sedan let you look right at the battery and replace by removing hold down and cables! Phew!

@donv6039 2 месяца назад

Yeah, I learned that FoMoCo wiper blunder the hard way on my Focus. Had to remove wiper arms/cowl to replace the CAT/Exh manifold assembly. Must have “adjusted” the arm position 3x before figuring out the key on mojo. Now we know. 🙂

@as3sxp 2 месяца назад

Oh man, my brother and I are experts now removing the cowl and battery on a 2014 Escape(same setup). We were helping a friend with a clunking that they were told from the dealer was the suspension and cv axles. We replaced the struts, rear shocks and CVs. Turned out to be the motor mounts...which requires a lot of the same work you showed including removing the cowl, battery and tray, etc. 😂

@ralphwatten2426 2 месяца назад

Whooda thunk back in the day that someone would need to have an instruction on changing a battery. Battery was on a shelf on the firewall. Battery current sensor...nahhh. I have a battery spray that I've had for decades that was meant to be sprayed on the terminal before you put the cable on. Thanks for all the vids Mr. O.

@richardp969 2 месяца назад

Great video. FYI: Ford has a policy that when a connection to a body part is being used for an electrical connection, the Bold must be welded into the body/frame. That way you do not have to depend on the sheet metal. The nut or bolt welded to the body will make an electrical connection for ever. There is no need to take the paint off, and expose the body to rust.

@Shiver2002 2 месяца назад

Man I wish I knew about the wiper thing when I changed the battery on my friends escape. We fought with it for quite some time.. Ended up just falling into the solution.

@spelunkerd 2 месяца назад

I agree with that viewpoint to avoid dielectric grease before making the connection, and was surprised to see there is ongoing debate about that. Advocates for putting dielectric grease on before will say that water has a way of penetrating crevices, and once there it tends to stay and dissolve salts to start galvanic reactions. Then crusty salts tend to draw in moisture by osmotic effects. They'll say that the physical contact of clean threads together reliably push grease out of the way to always get a good connection. There's no doubt that the grease will fill those void crevices much more completely if it's put on before. So I guess I can understand their point of view, corrosion can start deep inside and works its way out.

@ronhannink1968 2 месяца назад

Eric, it’s funny you said “the solution to pollution is dilution“. As you perhaps already know, we are a big tow company here in the state of California. We remove “stolen vehicles“ out of the California Aquaduct that stems from Northern California to southern California at about 50 to 60 feet Deep. The reason why I’m bringing this up is because they actually do use those words when it comes to the oils that are coming out of those cars. It’s actually in there operation manual and it state. “the solution to pollution is delusion”. I thought you would get a kick out of it. Ron

@Vincent_Sullivan 2 месяца назад

I seem to recall that Ms. Frizzle of the Magic School Bus animated kids series uttered these words in one of the episodes back in the 1990s. Funny what you remember from when your kids were growing up!

@JoseSilveira-newhandleforYT 2 месяца назад

Good job, Eric! I still think it's easier to remove the airbox and the front of the battery box (power distribution panel), than dismantling the cowling.

@bcardot4957 2 месяца назад

My trucks 20yo. Been applying Fluid Film as a undercoating and filling electrical connections for the last 11 years. ZERO complaints. And I do live in NW PA. Love that you use it daily.

@Sojourning_ 2 месяца назад

good information, although we don't buy Fords, the wiper thing is a good heads up; Good Job Boss. The LORD Bless you and yours.

@stangaston9033 2 месяца назад

I have a 2016 Escape with an aging battery. Very good information today. The only thing that would make it better would be a cameo by Mrs. O. Thanks Eric.

@waltersweet4595 2 месяца назад

I have done this a few times on a 2013 Eco bust. Once fixing the between the engine and firewall coolant line leak. And another doing struts.

@GunfighterWyo 2 месяца назад

You share so much with the rest of us. Thank you for all you share with us.

@ralphbarrett2725 2 месяца назад

You are one of the best for how to info brother I've been watching your videos since day one and hopefully for a long time to come

@johnpereira822 2 месяца назад

Happy Friday Mr O thanks for a new upload

@ppeters480 2 месяца назад

Good video on the battery replacement, it seems like the COWL method is the way to go. Great tip on wiper mounting I never knew. This really points out how lame the Engineering is at Ford or the last 10 years. I recently replaced the evaporator core on an 2016 Fusion, that required removing the whole dash and both front doors, from videos the Escape has the same design, I think the doors might be easier to take off than a Fusion. They should have the Ford Engineers try to repair the stuff they design to see how much extra work this stuff becomes from these designs. I suppose its all designed that way to force many to take it to the stealership for repair, THe dealer out here in AZ wanted $3500 to replace the evaporator core, I was able to do it but being just a backyard DIY I don't think I will do that one again. I'm really more in the Ford camp than GM, but I can see why you are more familar with GM's, another day another Chevrolet to pay your way and your sons way through college. I just signed up for a membership today to watch the 3.0 Fusion coil video, well worth the money looking forward to more future exclusive videos.

@alexandergunaka666 20 дней назад

This is an inside argument at our shop and has been for 3 years. One guy will try and “all data says”, I stick with then why is the negative cable long enough for you to slide it out, and a third will come up With nonsense.

@BehindTheCounter_TFSO 2 месяца назад

Eric O, this is a perfect example of why we need to test batteries in our bays so our customers don't go through what you did. I've seen too many shops that don’t feel the need to test customers' batteries when they come in for service. They all want a battery consignment in their shop for when a customer comes in with a dead battery, but the majority of the batteries on their consignment expire or end up sitting there collecting dust. Those who do not understand battery terminals would just cut off the end and put one of those quick-fix battery connectors. Some shops don’t realize that some manufacturers no longer place the battery underneath the hood. Now, it takes time to replace the battery and may require charging the customer accordingly, as well as possible resets with a scan tool, depending on the manufacturer. According to Interstate, AutoZone is starting to pose a threat to independent garages when it comes to battery sales.

@DaveImagery 2 месяца назад

Mr O is a stud

@price9195 2 месяца назад

Long time subscriber. Thanks for minimizing commercials

@mazzg1966 2 месяца назад

As usual the consummate teacher...Thank you for caring to properly teach us the right way!! Keep it up Mr. O...looking for the next video!

@major__kong 2 месяца назад

You can put dielectric between electrical mating surfaces without causing issues as long as you have good clamping pressure. The surfaces will squeeze out the dielectric where they make microscopic contact. And where the surfaces don't make contact including at the edges the dielectric will protect against corrosion. For connectors with pins where the clamping pressure on the pins isn't as much as say a battery terminal cable, any loose (fretted) connection can be a problem if dielectric is applied.

@mattmanyam 2 месяца назад

This is my thoughts as well. I spend more time with the grease on the sealing gaskets on connectors now, rather than the pins themselves.

@petermccoll469 2 месяца назад

It's great seeing both ways to get to the battery. Thanks!

@KendrasEdge757 2 месяца назад

“Welcome back to South Main Auto channel, where we show you yet ANOTHER video on why you should NOT buy a Ford!!” Yes Mr. O, this is another great video and a prime example of why you shouldn’t buy a Ford vehicle! Another phenomenal job Eric!! Also, a big thank you to Mrs. O for “dragging that ford into the shop” for Eric to swap out the power box on this ford. All jokes aside brother, I really Appreciate all the content and your great humor as well!! The best way to wake up in the morning is a big cup of coffee and a new video from SMA with a cameo from the beautiful Mrs. O in the shop!! Great stuff brother!! God bless~

@KSMike1 2 месяца назад

They’re ALL crap now.

@mattmanyam 2 месяца назад

@KSMike1 especially when they're broken.

@NarfBLAST 2 месяца назад

Awesome tip on the wiper arms. Had not encountered that type yet but will be watching out for it now. Wiper arm accidents cause the some of the worst heartache because in hindsight they are preventable. Opened the hood with the wiper arms flipped up and missing wipers and cracked a windshield once and felt terrible afterwards.

@jimgates5422 2 месяца назад

Eric, my favorite feature of your videos is that when there is something to watch out for, you mention it. Not knowing about the wiper motors, I would have been the guy who ended up slamming them under the hood! Your sense of humor is great, the first time I heard audibilize the "click-click" on the battery cable, I laughed out loud. Keep it up my man. Best instructional vids on the Tube!

@scotth4483 2 месяца назад

What great job explaining how to do it in simple easy to understand terms! I know it will help other DIYSer's to do this unpleasant change with a lot more confidence. Thank you!😄

@Jaguarist 2 месяца назад

I have Ford Escape SUV 2015 and I did my own battery change, not so hard when You know what to do and have proper tools. Thanks for this video, always nice to see professional mechanic working.

@fredjacobs9654 Месяц назад

Nice of you to not rag on Mr DIY. Kudos to him for knowing when he's in over his head.

@brightsummer4442 2 месяца назад

Great video. Thanks for sharing an alternative repair

@glenharper3136 2 месяца назад

Thanks for the video Eric. My Granddaughter has one of those.

@ginder77 2 месяца назад

I am very grateful for the wiper arm information. I had no idea. But I also do mark them before they come off just like you said.

@mikeberry304 2 месяца назад

Just done a Ford Focus here over the pond , air box out every time for me , the small plastic piece goes in the battery tray at the back when the car has a small battery , good old Ford wiper motors , caught many people out 😂, good explained video 📹 Eric 👍👍

@rhkips 2 месяца назад

The airbox removal method is SO much more DIY friendly! There's a lot of "weird knowledge" you need to get the cowl off and on again without causing damage. I'm honestly impressed that the owner managed to get as far as they did, especially with no casualties!

@Afrattzz1 2 месяца назад

Great info about those wipers. Thanks for the video as always

@tywebb355 2 месяца назад

Another great video !! I was one of those cowl off guys. Although I did say that neither way looked super easy. I didn't know that your way was the Ford recommended way ! Anyway I traded mine in before I had to do that task. Thankfully my escape was pretty much trouble free for the time I owned it. I looks like your way is the safer one. If those wipers don't go on right, It looks like they can cause some damage.

@ricebike 2 месяца назад

Learned something new, thanks Eric O 👍

@marcusdarnell3348 Месяц назад

Great video Eric. I saw the previous video on replacing the battery on a ford escape and in my opinion and that's seems way easier. The goal is work smarter not harder.

@richard1835 2 месяца назад

Great information on the wiper alignment.

@KVB1804 2 месяца назад

Hello Mr O, the peace of plastic you found at the beginning is a standoff that fit in the bottom of the batteritray. I have changed my battery about 2 Month ago. In Germany we call this model Ford C-Max. I have a version with start-stop funktion. Therefor i need a bigger battery an the Standoff on the bottom seams to be like a placeholder of some kind. Greatings from Germany.

@TheClampettmobile 29 дней назад

Good deal for doing the battery in my wife's 2018 Escape. Thanks for the wiper tips.

@gordoncorey8023 2 месяца назад

Nice job you know you stuff about those that was pretty cool to see that all go back together

@jimprovax6846 2 месяца назад

Thanks Eric. Love your sense of humor. Once again great engineering FORD. Don’t even think about the kid at Advance does this job. Enjoy your evening.

@r.weaver3769 2 месяца назад

No matter how many times I've proven there is no need to remove paint from ground lugs...Dielectric grease, we used it by the bucket on board Navy vessels, just the way you are, coat everything then make the connections. Works good on watertight seals too. I use it on places where water can get into the car and flood electronics too, like bulkhead connectors and trim panels.

@eric_seguin Месяц назад

Reading the comments is some pretty good entertainment. Thanks Eric.

@FurryWrecker911 2 месяца назад

I despise how in-the-way the cowl is on 2010s era Fords, but I love how the wiper motors act independently of one another instead of being hooked up with a transmission. Easily one of my favorite parts of my 2018 FoST. Accessing the battery and the brake fluid reservoir on the other hand I have some pretty strong words over.

@terpman 2 месяца назад

I had a 2014 Escape, same design as this one. I found it MUCH easier to just pull the airbox and slide the battery out. You get a little more room by unbolting the brake fluid reservoir, if you feel like you need the room. Between the plastic clips and the wiper arms, I think there's a lot more potential for DIYers to damage something just because they don't have the feel for those parts.

@gregsidel3557 2 месяца назад

Thanks for the info, Eric. Very good video thank you

@victorbellan8357 2 месяца назад

Nice explanation learned more gain today !

@zeke1eod 2 месяца назад

I would love to get the story of the 1st mechanic and what he did to the engineer, which makes them hate us so much. Great job as usual. Stay safe and God bless

@wtlwoods 2 месяца назад

This isn't related to this video but, I need to thank you for teaching the basics. Help me figure out a problem I had with my 2010 T&C. Still have one issue to work out with not comm to the anti-lock brakes. Will use your methodology and hopefully get it done.

@rogerriggins8319 2 месяца назад

Groovy Learned something on an over engineered POC Thanks man Hope you had a great weekend either practicing with your bow with the missus or a cooking class with venison

@timd1833 2 месяца назад

Thought of this when you were washing out the battery box. Dissolve some baking soda in the water to neutralize any battery acid.

@eltonyancey6426 2 месяца назад

I have a 17 escape and when I had to change the battery, I tried to do it this way but couldn't get the wipers off. Did it the way you did it in the other video. Not that bad but nothing like it used to be.

@rickwalling1148 2 месяца назад

LV the hidden secret messages he does! Hope the masses pickup on them!

@CycleGeezer-cq9lm 2 месяца назад

More than one way to "skin a cat". Mr. O giving us the alternatives. What a guy! Always enhancing our knowledge. No wonder we watch SMA videos.

@SGDeGalvez 2 месяца назад

Thanks! Really appreciate these videos.

@volvo09 2 месяца назад

Nice!

@AnthonySmith-hr2kp 2 месяца назад

Nice job Mr O.

@aldonco 2 месяца назад

Thanks for the tip I did not know about the wiper hoke poke.

@MisterMsk 2 месяца назад

The negative battery cable getting stuck on the terminal happened to me as well. I picked one off of Amazon. But, NOTE that you have to install a new connector if you go aftermarket like that. At least the one on amazon I had to. Additionally, the plastic block you had in your hand that you found inside the battery box keeps the battery in place. You see when the battery is installed it moved forward and back. With that block installed, it keeps it snug. Nice video. I'll remember the trick with the wiper arms next time I change the battery.

@villadelrefugio 2 месяца назад

I will do almost any car battery at my auto parts store except for the wheel well Chryslers, under the seat Cherokees, and any modern GM with 37 pigtails and brackets hooked to it. The escape/edge/focus batteries are a pain but the hardest part is putting the intake ducts back in place correctly.

@markroper9269 2 месяца назад

Great video! Very educational.

@johnreid859 2 месяца назад

Good tip on the ford wiper set up.

@ShainAndrews 2 месяца назад

I learned something today. About wipers of all things. I probably would have figured it out though. I tend to try and move the arms after installation just to make sure I got them seated on the shaft correctly.

@Boilerking76123 2 месяца назад

I can’t believe he didn’t clean that. 😊. Love you Mr O

@Diogenes-ty9yy 2 месяца назад

My first job, when I was 15 in 1964, was working at a small battery manufacturer in Chicago. We made batteries for lift trucks. some for cars, but mainly 8 battery sets, 8 volts each, for railroad locomotives. Fun job, working with powdered lead, molten lead, sulfuric acid, fiberglass separators, and liquid tar to seal the tops of the tar top batteries back in those days. An older gent there used to ask my help in getting old batteries out and new ones in certain cars back then. Some Lincolns then used a group 30H battery and part of the battery was under the left front fender and required a special tool, a non conductive cable with a circular metal ends to loop over the terminals then lift and pull it up, angle it, and pull out, probably did 1 or 2 per week back then. That m-fer was over 50 pounds but I was younger 60 years ago and it was no problem for me then. And, as I was under age, I did this for $1 per hour when minimum wage was $1.25. This video brings back memories, it reminds me of Ford engineering, placing a battery in the most difficult place to replace it. Then again, my '93 Chevy Lumina had the battery under the washer fluid tank, an equally distasteful place. Just one comment, did the customer buy the correct battery for this vehicle? That plastic battery tray or compartment looked a bit roomy for that battery, like maybe he bought an incorrect, smaller group size for that vehicle. It should have been a group size 96R from what I can determine. And, as always, Mr.O, a great video that brought back some memories for me.