I continuously marvel at just how much the world of auto repair must have rejoiced, and cried tears of joy when cordless tools, especially ratchets became available.
I need you as my mechanic I just bought a f150 2.7 eco boost with 92000 miles the truck runs as if brand new. This is a very good video well done very explained I learned a lot thank you sir 👍🏾
This is an amazing video. Thank you for making it. The part list is amazing also. I don't need it to repair anything but it certainly shed some light on how complex the replacement actually is. I would try this myself if required. Some people who have no idea on the cost have said oh no its going to be 5k for a turbo if it goes bad. The turbo assembly is $507 USD at this time. Really makes me feel better about keeping the truck long term.
My guy ford charged me 3,700 for the passenger side turbo replacement and took 2 weeks. Now I have the drive side bad. You just saved me money and time thank you! You explained it with perfect details!
That looks way easier than the horror stories going around, and the online experts telling you to trade them in before 100k. Not worried about keeping mine now past warranty. Cheers
Once you do one they aren’t too bad just a little time consuming. Parts in total is around $800. I would much rather do a turbo on an eco-boost motor then a lifter on a GM lt motor
I have the so called dreaded 5.4l 3v engine scorned by many. Little secret, Ford builds good engines. Change the oil sooner than Ford tells you. 5w30 instead of the 5w20 is what I do.
Read this if you’re looking for more guidance on the TSB regarding white/ blue smoke upon start-up after a cold soak (TSB 19-2188). I have a 2015 F150 with the 2.7 and I was getting white smoke in the morning. This tutorial is excellent. It provided everything I needed to know to swap the oil line on the driver side turbo. There are a few things worth mentioning though. 1. You do NOT need to remove the fender liner. I was able to complete almost all work from the top of the truck. Removal of the tire and air intake piping is necessary however. This was super easy though. There are several hoses and sensors connected to the intake pipe attached to the turbo, I counted 6 different ones I believe, so be careful removing them. 2. No power tools are needed to complete this job. I found hand tools like sockets with extensions and regular wrenches more than adequate given the tight spaces. 3. In the video I believe the gentleman said a 16 mm wrench was needed to remove the exhaust nut. I found the 16 was too big and used a 15 instead. I used a box-end wrench from the top of the truck, not a socket through the fender well. Both the bolt and exhaust stud were very easy to remove. 4. If you are just changing the oil line, you do not need to drain the oil or antifreeze. When I removed the oil line only the smallest trickle of oil came out of the engine block. 5. The oil line will require a bit of tugging to come lose. I pulled the line from the engine first, then pulled the line straight out of the turbo. Don’t be afraid to use some elbow grease. 6. I ordered the OEM replacement oil line from Tasca Autoparts using the part number indicated on the TSB (FU7Z 9T516 A). They might tell you the part doesn’t fit your truck, but it is appears to be the correct part (it was a direct fit after all). I believe the stock part was updated after Ford recognized the issue and released the TSB. I’ve driven the truck around the block and there appears to be no issues. I’ll give an update on a month or so. Thanks for the awesome tutorial.
Just an update. I’ve put about 300 miles in the heat of July, with about 2 hours of idling as well with AC running - no issues at all. The problem has been resolved.
Excellent nearly perfect narrative and great explanation of the whole process, Thank You Keep those videos coming, Looking forward to it! Above my mechanical skill and hope I never have to replace this part but I will save the video to show my mechanic if (God forvid ) I ever need to
try to ask, the oil line for the turbo has rusted, should I replace the whole turbo include the line or just the line only, as turbo seems need replace over time
Wow great video you are the man. That was a lot of work. At least it made it to 170k. Have you seen this happen often. In your opinion How long do these turbos last. Thanks for ALL your great videos.
Your pretty good bud definitely changed my mind I figured turbos were 2500 for the pair looked up on google with your link there 550 I can afford a stupid spinner gadget truck. And afford to replace them when they go out looks like you spent about a whole hour making the video too kudos very informative man
We just paid $2500 to have ours fixed and picked it up today and it sounds worse! And left with them telling us that now the other side is bad when it wasn’t before we drop d it off
Would you please let us all know how much they would charge? I know here in Northwest Ohio to replace a bad turbo on a 3.5 eco-boost at the Ford dealer is around $6000 😂
Are you serious ! That's crazy. I live in Sylvania and have a 2020 2.7 echo with 20,000 miles. I'm hoping nothing ever happens but if one goes out I want to do the work. Doesn't look to bad to do. Just retired early as a aircraft mechanic and I've fought a lot of engine valves that look like this.
Excellent step by step. Thank you. Any concern the passenger side turbo would need replacing as well even without throwing a code? I know it's expensive but just wonder at 127k miles if it makes sense to do both. I have a 2015 F150 2.7L super crew and love it.
I’m curious, I recently bought a new turbo from rotomaster and the instructions stated to add some oil on the feed line and spin the propeller by hand to coat the bearing so when it starts for the first time it’s not running dry of oil. Secondly it also states after installation is complete to pull the fuel pump fuse out and crank the motor to build up oil pressure (without starting the motor) then to add the fuse back in and start it. Is this something worth doing or is this going the extra mile?
@@AaronHinesAuto When you say "awhile," how many total hours did you invest in the actual work, not including the on the fly explinations? Basically, I'm a heavy equipment tech, and swapping a turbo on say, a John Deere 624G took me less than a day, but my 2.7 L F150 obviously has a lot more stuff in the way. If this took longer than a 10 hour day to replace, I might be looking at paying someone to do it instead of doing it myself for just the cost of parts.
My salesman had a 2015 transit 350 that was traded about 2 years ago. The spark plugs were replaced twice, but it was just as clean as this one but had 320k. The south doesn’t eat vehicles like the north. It helps that it never had a leak or anything too. My 2015 with 135k looks like it just came off the showroom under the hood. And aside from a couple bumps and scratches, the paint looks new too. I’m here because I just got the same code and it’s starting to smoke.
Excellent & informative!... my 2015 2.7 with 90k miles isn't throwing any codes but I'm getting the waste gate "rattle". I suppose replacement can't be too far off.
Hi I'm looking at the parts list. Seems off. Why do I need 3 turbo to manifold gaskets? ( fl3z9448b) 2 for left, one for right? Why does the left need 2?
Iv got a 2016 . No codes but smoke bad . If I drive at speed no problem but if I pass it wants to redline and I hear a whine from turbo. Is that a sign of bad turbo I need to replace.truck only has 13 k miles
This video is great it’s full of great information thank you for that I do have a question what is that aftermarket fix for the wastegate that you said you wouldn’t use because it’s a fleet vehicle
I have an exhaust leak at my passenger side turbo. I tested it using an evap leak detector/smoke machine. If I want to replace both exhaust gaskets for the turbo, do I have to remove all those lines? I think it’s just the cat donut gasket leaking, but was gonna do both while I’m in there. But if it’s too much work maybe not. Thanks so much for this amazingly comprehensive video!
Hi there Aaron, question: on that Ford 2.7 EcoBoost turbo, do you have a video on changing the passenger side turbo? Gonna change mine next weekend. Hope you can reply asap. Thanks i'm advance.
Hey I am having to change my turbo since the wastegate is having problems. For the number of each item needed, is that what is in parenthesis? For example, 12.FT4Z6N652D Gasket (3) is the 3 how many I need to order for the right turbo? Thank you in advance
I have a 2.7 L in my regular cab short box 4 x 4 2016 F-150 In this configuration it is faster than the 5.0 V-8 F-150. I also have a 2015 mustang GT performance package which is tuned if I had to buy a 2020 or newer F150 it would be the 2.7 L again
@@RoscoRide I really like it so far. They updated the engine in 2018 to have another injector to clean the valves to prevent the carbon buildup. It’s very efficient on fuel as well. Hey I have a Mustang as well. I have a 2007 Shelby GT before the GT 500 came out. It’s supercharged with 580 hp and cat deleted exhaust
So the other day my truck went into limp mode do to problem with the throttle actuator open removing and inspecting i found a blue o ring caught in the throttle plate could this be part of the turbos?
I wish the 2.7L V6 EcoBoost engine available with the new Explorer XLT and Limited. I think the small 4cyl 2.3L has too much turbo boost and this will affect the long-term reliability. Regards.
Where do I buy the hoses or clamps that go to the driver side turbo charger? The green one is cracked causing my check engine light to come on. Can anybody please help me?
This is what it takes to get 19 ish MPG city and 25 ish highway out of a 325 HP motor. Would you rather have a 1979 F150 with a 460 that gets about 6 MPG and makes 214 HP ?
So it isn't necessary to replace both turbos when one is bad? Im at 140k miles and getting P0299 and shop says the right side is not having adequate intake pressure. And suggested replacing both because that what ya do.
I would be changing out that actuator but what do I know maybe the turbo is baffed. Anyway that is a lot of extra stuff just because of a vacuum diaphragm.
How much for parts? Christian Bros are wanting $5700 to replace both my turbos on my 2016. I replaced my 98jeep engine, figure I ciuld save a few thousand and do this myself also.
I can’t believe Ford sells these things with a straight face ! No way I would buy a full size truck with that puny of an engine!not only that they are proud of them!what was that pile new 70.000 plus ! P.T.Barnum said it best theres a sucker born every minute
Aaron, in terms of reliability, dependability and lower cost of service in the long run between 2.7L and 3.5L eco boost engines which would you recommend? Thank you.
nah id say whenever you replace the turbo swap the line with the filter on it. shouldnt have that much build up if you changing engine oil and filter at a decent interval. if there constant build up on it you have bigger issues
@@AaronHinesAuto Thanks. But I had my oil changed just last month. My question was does the oil need to be drained in order to changed the tube. If I leave the oil in there will it all come spilling out when I take that tube off? In your video you show draining the coolant but not the oil. Thanks,
Great Video!!!!! quick question..... I have a 2016 f150 2.7 Eco-boost that is blowing white and a little blue smoke out the tailpipe on cold start, I have been reading that it has something to do with the oil bypass tube, can this be replaced on its own or would the whole turbo need to be replaced? Also , how long would changing the Turbo take? Thanks......
I'm having a similar issue. There's a technical bulletin from ford saying that the left hand oil feed tube is leaking oil on a cold soak causing for excessive smoke on start up. Took it to ford and they confirmed the issue but wanted to charge 800 for it. They said all you need is to have that line replaced. I have a powertrain warranty. Part is not covered under their warranty
If only I was a tech in a southern climate! Good video but our northern vehicles look nothing like this. Exhaust studs that are nothing but a rusted blob and seized oil and cooling tubes turn it into much more of a job than this.
So basically we’re looking at a $4000 repair job for a $25 turbo wastegate diaphragm? Why would Ford make the turbo so inaccessible? Crazy how many people still want these small turbos
Comments from many of the turbo experts they say they wont last past 50 k miles, well I guess they are not experts, lol, well done video!!! Also why didn't you add a piece of rubber hose on that drain cock just curious?
Something missed: precharging the turbo with oil using a hypo syringe , disconnecting fuel supply, and cranking the engine ( NOT STARTING ) to pressurize the oil supply to the turbo.
@@carguy2256 Probably just pulling the relay or fuse to the fuel pump. Pretty sure holding down the gas pedal and then holding the key in the start position will crank the engine to build up oil pressure without pumping any fuel.