Тёмный

Ford Factory Accessory add-on | 5th Wheel-Gooseneck hitch install - F250 F350 F450  

PowerStroke Tech Talk w/ARod
Подписаться 169 тыс.
Просмотров 26 тыс.
50% 1

If factory 5th wheel prep/goose neck hitch install is what you want to add on then YOU NEED TO watch this video. What up S U P E R D U T Y GANG!?! We had a customer find us on the internet and reached out to see if we would be interested in adding the Ford factory 5th wheel prep kit. In the video you can see the way we did it and how it all turned out! Thanks so much for watchin' each week & Remember to LIKE - COMMENT - SUB - SHARE #5thwheel #gooseneck #fordtrucks
Check out PPE here:
ppepower.com/collections/oil-...
To get hooked up like PTT please check out this link!
You won't be disappointed, I wasn't...trust me, ALL worth it!
****** www.limitlessautoworksLLC.com ******
Need truck parts for YOUR Ford Superduty??
Check my crew out over at Outdoor Trucks @
www.outdoortrucks.com/ Ask for Bliss, tell em PTT sent ya!
Check out these other 6.7 Playlists!!
6.7 Oil Seals Replacements
• FORD 6.7 Oil Leak Repa...
6.7 Turbo Videos
• Ford 6.7 Powerstroke T...
6.7 Repair Videos
• FORD 6.7 Powerstroke R...
6.7 Engine Light Videos
• FORD 6.7 ENGINE LIGHT ...
6.7 Maintenance Videos
• FORD POWERSTROKE MAINT...
Check out my Instagram & Facebook
@PTT_W_AROD / Aaron Power Stroke / Powerstroke Tech Talk w/ARod
Business Inquiries: powerstroketechtalkwarod@gmail.com
Music: ------------------------------
Know Myself - Patrick Patrikios
------------------------------
To send a small donation to help my channel grow & to also to contact me, please visit my Paypal at my email powerstroketechtalkwarod@gmail.com
I am the creator and owner of this material. It does not belong to; nor is affiliated with ANYONE, except for me, the owner and creator. Downloading is strictly forbidden. Contact me if you want my material, its that simple! The events, the characters & even the firms depicted in my photoplay are fictitious. Any similarity to actual events, persons living or dead or to that of actual entities are purely coincidental.

Развлечения

Опубликовано:

 

29 авг 2022

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 144   
@mjbskidoo
@mjbskidoo Год назад
Just a little tip from a fitter. Always drill your pilot hole first,then install the hole saw. It will stop that poke through catch it does and won’t break the bits too. Also, always keep the handle on the drill to help hold it for leverage. Awesome video bud…..👍🏼
@21psd
@21psd Год назад
Another tip to prevent the hole saw from walking, make sure your pilot bit is at least an inch or so longer than the hole saw. Great video as always Aaron!
@wheelinndealin
@wheelinndealin Год назад
Yoooo love the videos but just as a tip hole sawing in general for your initial pilot hole pilot run the drill without hole saw that way you don’t have that initial aggrieved grab because you can bend or snap the pilot off, this way you’ve got your pilot hole done nice and easy then after that bring the hole saw equip on arbor and now our pilot is just guiding it nicely, great install tho!
@adirondak50
@adirondak50 Год назад
I installed mine on my 2019 F250 back in 2020 . At the time my 11 year old grandson helped. I lifted the body one side at a time and he put 4x4 blocks between body and frame . Took me about 6 hours but I work slow . The factory 5th wheel prep by Ford is build like a tank , I would definitely do again if I had to . Great video , wish it was posted when I did mine .
@mariobrothers8348
@mariobrothers8348 Год назад
Good idea to install the airbags at this point if you have the bed off. A lot easier than from under the truck. A much more comfortable towing experience with a fifth wheel.
@gliderider7077
@gliderider7077 Год назад
Amen! Just put my air ride on and wow what a difference.
@jandblawncare8570
@jandblawncare8570 Год назад
I hated my air bags in the two trucks I had them in, every bump seemed amplified x 10. I switched to Timbrens and loved them.
@mariobrothers8348
@mariobrothers8348 Год назад
If you deflate them when not under heavy use you don't even notice they are there.
@jandblawncare8570
@jandblawncare8570 Год назад
@@mariobrothers8348 Yeah I didnt have the ones you can deflate all the way and had to keep 5, maybe 10 psi in them all the time. They do have their benefits, I just didnt like them.
@ArmySapper
@ArmySapper Год назад
Great stuff as always! I did mine in 6 hours with my 13 year old!. I took out all the bed bolts and lifted one side while kid put in 2 4x4 wood blocks in the front and rear on the frame and repeated on the other side. went pretty slick. Thanks for all your vids and what you do bro!✌
@PowerStrokeTechTalkwARod
@PowerStrokeTechTalkwARod Год назад
Hell yeah
@SupermanDaddy-777
@SupermanDaddy-777 Год назад
I had no clue how to do this but after watching your so very very very detailed video, I now think I can Fly! Better yet, the student has become the Master! LOL!!! Thank you so very much! I am your newest subscriber!
@PowerStrokeTechTalkwARod
@PowerStrokeTechTalkwARod Год назад
Dude, thanks buddy. We appreciated your comment.
@mikebrand7922
@mikebrand7922 Год назад
I did this to my 2020 in my Driveway… Had a few o-shiz moments, but everything worked out perfectly. That bed is aluminum, but it is still heavy - had 2 guys, should have had 4 or a hoist to lift it.
@matthewfort3740
@matthewfort3740 Год назад
I have the B/W gooseneck hitch. And my truck came with the 7 pin 4 pin combo on bumper. And 7 pin in the bed. Both of them works great.
@bpaulk94
@bpaulk94 Год назад
Wife and I did this to mine last weekend, took 3 hours used a tractor with forks to pull the bed, used the box link cleats and some ratchet straps came of nice and easy
@armedmariner
@armedmariner 7 месяцев назад
GREAT IDEA on the box link cleats man. Thanks for that. Really awesome what you can learn from comment section!
@matthewgraham7419
@matthewgraham7419 Год назад
Best trick an old timer showed me on this job… drill holes in a piece of 3/4 plywood with the hole saws to create a drill guide… line her up and send it… no risk of the saw skipping around and messing up the sheet metal. I keep my jig hanging on the tool box, use it several times a year . Great work sir!!
@PowerStrokeTechTalkwARod
@PowerStrokeTechTalkwARod Год назад
Nice tip
@freezeframejlp1
@freezeframejlp1 Год назад
Use just a 1/4 bit to drill a hole first. That will save you using the hole saw bit going though and grabbing the saw. You have a chance when it grabs bending or breaking the bit.
@TonyBenton0728
@TonyBenton0728 Год назад
Glad mine was already installed from the factory on my 450 .
@magnuseriksson5721
@magnuseriksson5721 Год назад
so nice so Beautiful Super Duty and you Aaron do an amazing work
@wcooksey4252
@wcooksey4252 Год назад
Came within 2 weeks of buying a 5th wheel and having to do this, but found a trailer at the last moment so didn’t have to after all. Awesome video in case I upgrade again though. Thanks.
@radarnj8043
@radarnj8043 Год назад
A bigger D handle drill with a screw in handle helps a lot to control a big hole saw no matter the material you are drilling. Feed pressure and speed matter. You were getting the metal "twirls" which tells you got it right... Nice job!
@patrivard9229
@patrivard9229 3 месяца назад
Doing mine next week. Thanks for the info, should be a big help. 👍 So I drilled all holes in my truck bed this morning. Be careful when drilling the front left one the wiring harness is right below and quite close. Just finished doing the install, everything went smoothly about 2hrs time from taking the box off to putting it back on. So just a quick tip when putting the plastic beauty rings on put them in hot water for awhile and they are way easier to get on.
@jeremyrios433
@jeremyrios433 Год назад
Nice bro, I have my prep kit Glad you made this video 👍 I’m sure my 2 boys are going to enjoy helping there Dad install it🤣🤣
@Patrick-zm8jp
@Patrick-zm8jp Год назад
After trying an aftermarket hitch that I hated and returned I got my OEM hitch from an upfitter that was reselling the takeoff hitches. Got the bed wiring harness from a dealer and installed it all. The hitch was short 4 bolts so I had to source them from Fastenal otherwise a relatively smooth install. I did have to make my own trim ring to fix the hole from the aftermarket hitch that I tried. It needed a larger center hole so I made an aluminum ring to bring it back down to the right size.
@ATR-42
@ATR-42 Год назад
one of your best videos, awesome work!!
@PowerStrokeTechTalkwARod
@PowerStrokeTechTalkwARod Год назад
Cmon
@terrydtdi
@terrydtdi Год назад
Great video PTT! I wish it was about 2 years ago lol. I was contemplating doing it my self, but I found a hitch/truck store that did it for me. Glad I went that route, I think they under charged me with the time and body’s they had working on it. But with your video it sure build confidence for a good DIY’r. Can’t thank you enough for what you do brother. Sure wish I was closer to where your dealership ship is. It’s got to have one of the best shop ratings in the country. I’ll come see ya sometime.
@PowerStrokeTechTalkwARod
@PowerStrokeTechTalkwARod Год назад
Come thru pal, ill give it some PTT ❤️
@vince5506
@vince5506 Год назад
Yes sir!!! That’s nice! 💪🏼💪🏼
@Uncle_Fester24
@Uncle_Fester24 Год назад
Video made me a nervous wreck..lol. finish product looks excellent! Nice work!
@akbychoice
@akbychoice Год назад
Finally I see how the plastic O-ring covers are suppose to works.
@jerryknorr679
@jerryknorr679 Год назад
Get video ARod, but my 16 came with the 5th wheel and sprayed in liner. If my truck didn't come with it, I would of did it. Thanks for sharing ARod
@vincebotkin1960
@vincebotkin1960 4 месяца назад
Drill the holes with a slight angle on the hole saw to prevent it from biting in and jumping
@akbychoice
@akbychoice Год назад
I keep a little mounding clay handy for drill through sheet metal, create a dam around the area and put some water solvable oil to keep the hole-saw cool and extending the life.
@williamelwell408
@williamelwell408 Год назад
Another awesome install.
@PowerStrokeTechTalkwARod
@PowerStrokeTechTalkwARod Год назад
Yooooo
@JeepBigE
@JeepBigE Год назад
Great instructional video!
@matttheratt
@matttheratt Год назад
I was going to suggest you do a video on this... You must read my mind!
@3374jj
@3374jj Год назад
Nice set up. I wound up with a B&G on mine.
@gohoshane
@gohoshane Год назад
use painter's tape on the bed when your using the hole-saw.
@loft306
@loft306 Год назад
When my buddies installed their hitches they had to drill each other’s truck they couldn’t bear to do their own😂🤣😂🤣
@PowerStrokeTechTalkwARod
@PowerStrokeTechTalkwARod Год назад
Now thats funny shit
@armedmariner
@armedmariner 7 месяцев назад
haha...haha...haha...@@PowerStrokeTechTalkwARod
@axl151
@axl151 Год назад
I use hole saws in aluminum sheet frequently at work. There's no substitute for using a little machining coolant to keep the saw running smooth and control the grabbing.
@PowerStrokeTechTalkwARod
@PowerStrokeTechTalkwARod Год назад
I like
@landondc4739
@landondc4739 5 месяцев назад
Butt butter
@dpmautomotive1758
@dpmautomotive1758 Год назад
Never did the factory unit but did the B&W hitch for my 5th wheel
@DJPereira2012
@DJPereira2012 Год назад
Got to get the goods to set up for the long haul.
@eadytrucking
@eadytrucking Год назад
Great video
@nathanstaab
@nathanstaab Год назад
PSA: This kit is straight money. The Reese hitches lock right in, and the goose ball is detent based and slips right on in.
@loft306
@loft306 Год назад
Before you screw on the holesaw you should just drill through with a pilot drill it’s much easier to get your hole in exactly the right spotAnd then have that holesaw spinning at speed it will cut by itself you don’t have to push really hard And yes two hands it’s really easy mess up your thumb or your fingers if it stops on a dime.
@dustinfarrar7073
@dustinfarrar7073 Год назад
Just something I noticed when I did mine and now after watching your video as well is that the hitch seems like it’s about a quarter inch offset of center of the holes to the passenger side of the truck. Also left everything loose and dry fit before torquing everything to spec just like you did
@jeffdroller
@jeffdroller Год назад
FYI - If your customers want to have the factory 7-pin/12-pin connector that is used for Ford factory trailer TPMS, yaw sensor or rear camera, you will need this P/N: LC3Z-13A576-F. Replaces the 7-pin connector shown on rear driver side, inside the bed.
@PowerStrokeTechTalkwARod
@PowerStrokeTechTalkwARod Год назад
Thanks buddy!!!
@timsmith4519
@timsmith4519 Год назад
Try some blue tape where you’re drilling along with some cutting oil on the aluminum. A longer stick out on pilot bit helps too. Just some feedback.
@scott9650
@scott9650 Год назад
Take the hole saw off and drill just the 1/4 pilot hole first...Then start the hole saw in reverse a couple turns then go to forward....
@arizonalifestylechannel2186
As I waited for my F450 order, a salesman offered me a F350 but it had no 5th wheel prep package. They Quoted me 3700 for the Ford hitch and the ford prep kit installed. I would have ended up doing in the way AROd did. The f450 build date is Week of the 12th of September and It has the prep package and the 5th wheel hitch. The factory kit is Known to be better than BW's offerings
@landondc4739
@landondc4739 5 месяцев назад
Wasn’t the prep pkg like 250 or 500$ from factory?
@arizonalifestylechannel2186
@arizonalifestylechannel2186 5 месяцев назад
@@landondc4739 correct, well worth 500ish. I have had it in my F450 for a year now and worked well with my 5th wheel
@codyphillips48
@codyphillips48 Год назад
I was waiting for the "whatever whatever" 🤣🤣🤣🤣
@PowerStrokeTechTalkwARod
@PowerStrokeTechTalkwARod Год назад
....well let me ask you this....🤣🤣🤣🤣😂😂😂
@codyphillips48
@codyphillips48 Год назад
@@PowerStrokeTechTalkwARod 🤣🤣
@DANSHotshotTrucking_Outdoors
My Ford dealer didn't want to mess installing the Ford system so I ended up buying a B&W gooseneck hitch and installed it myself. I will be ordering the hitch pre installed on my next truck.
@PowerStrokeTechTalkwARod
@PowerStrokeTechTalkwARod Год назад
Thats some bs, wonder why they told you to take a walk
@DANSHotshotTrucking_Outdoors
@@PowerStrokeTechTalkwARod I think it was more work than they wanted to tackle. Ended up saving me hundreds.
@pinktacotuesday4573
@pinktacotuesday4573 Год назад
Got a build date for the end of next month then will be installing 5WP and bedliner.
@BeardedFordTech
@BeardedFordTech Год назад
Great video brotatochip
@PowerStrokeTechTalkwARod
@PowerStrokeTechTalkwARod Год назад
C u tonight
@projectamateur7403
@projectamateur7403 Год назад
Not sure if anyone else said this in comments. But when drilling those big holes in metal. Drill center hole with normal drill bit. Then put hole saw on there and put it In reverse at first. This scores the metal and helps stop it from walking on you.
@PowerStrokeTechTalkwARod
@PowerStrokeTechTalkwARod Год назад
Yepp they did
@rangervapes571
@rangervapes571 Год назад
I did this on my 2015 F250 (SteelDuty) Looks so much easier with the alumaDuty
@petenowell9809
@petenowell9809 Год назад
Just a quick question. What are the part #'s from Ford for the hitch & harness.
@shanetaylor7581
@shanetaylor7581 Год назад
I went turn over ball but need the bed plug. Would really like the raptor trailer plug/110v power outlet combo box. Not sure how or if it will work though.
@PowerStrokeTechTalkwARod
@PowerStrokeTechTalkwARod Год назад
Yea gonna b a tuffy
@1fastregal1
@1fastregal1 Год назад
Great video I plan on doing this soon any tips or tricks for a truck that already has a spray in liner??
@PowerStrokeTechTalkwARod
@PowerStrokeTechTalkwARod Год назад
Id get a sharp exacto & trim around them bolts if they were sprayed over
@xtremesvcllc
@xtremesvcllc Год назад
Had mine done also and the rubber rings keep coming off due to the bed being line x.
@imranabbasi7871
@imranabbasi7871 Год назад
👍
@dolanschmidt356
@dolanschmidt356 Год назад
Nice job, want to do my 18 f350
@PowerStrokeTechTalkwARod
@PowerStrokeTechTalkwARod Год назад
When u comin thru
@dolanschmidt356
@dolanschmidt356 Год назад
I live in N Idaho
@PowerStrokeTechTalkwARod
@PowerStrokeTechTalkwARod Год назад
Ok, no biggie
@phillipbartowsky2979
@phillipbartowsky2979 Год назад
Run the whole saw backward until it starts the cut all the way around. Than go forward. Keeps it from bucking out so bad
@zekester1
@zekester1 Год назад
I went the old way (rails in bed)..."El cheapo" here🤪🥴...later👍💪💯
@sam_thomas
@sam_thomas Год назад
Any suggestions for how to reinstall my drop-in bed liner after installing this 5th wheel system? I guess I could cut holes in my drop-in liner, but I'm afraid that dirt would constantly get into those holes.
@PowerStrokeTechTalkwARod
@PowerStrokeTechTalkwARod Год назад
The drop in is no longer used. Ud have to get a spray in, unless ya had the rail type bed 5th setup
@acdii
@acdii Год назад
What I would like to know is where can I get the 12 pin bed socket and plate to replace the 7 pin only so I can use the trailer camera/TPMS system. The kit includes the bumper socket only which is no use when towing a 5th wheel.
@PowerStrokeTechTalkwARod
@PowerStrokeTechTalkwARod Год назад
Hmmm
@steve345
@steve345 Год назад
Unfortunately the Ford dealerships in my area (FL.) if they have them are holding onto the oem prep hitches and installing them on the super dutys that were ordered thru their dealerships. My dealership just told me 4-5 week maybe more of a wait and I would pay for shipping. Just ordered a B&W thru e trailer since I need it now.
@PowerStrokeTechTalkwARod
@PowerStrokeTechTalkwARod Год назад
Wow!
@jandblawncare8570
@jandblawncare8570 Год назад
A 6.7 gasser with a 5th wheel...good luck, my 16 F250 was a 6.7 gasser and towed a 36ft, probably 9600lb travel trailer and averaged about 5-6mpg.
@PowerStrokeTechTalkwARod
@PowerStrokeTechTalkwARod Год назад
7.3......
@jandblawncare8570
@jandblawncare8570 Год назад
@@PowerStrokeTechTalkwARod I thought you said a 6.7 in the beginning,
@PowerStrokeTechTalkwARod
@PowerStrokeTechTalkwARod Год назад
Naw
@tallermark2171
@tallermark2171 Год назад
Wanted that option, most likely will leave it to the stealership. I wouldn't want to mess the bed up.
@PowerStrokeTechTalkwARod
@PowerStrokeTechTalkwARod Год назад
I got chu
@josephb4935
@josephb4935 Год назад
Why do you prefer dielectric grease over dielectric silicone. Wouldn't the grease get contaminated easier from moisture?
@PowerStrokeTechTalkwARod
@PowerStrokeTechTalkwARod Год назад
I haven't had an issue using ford xl12
@josephb4935
@josephb4935 Год назад
@@PowerStrokeTechTalkwARod Thank you. Awesome video BTW. I have a Race Red '18 that I'm about to start this job! Perfect timing 👌
@I5ZQ8
@I5ZQ8 Год назад
So what's the advantage of the OEM kit vs like the BW? Doesn't the BW do both 5th wheel and a gooseneck?
@rodstephens6612
@rodstephens6612 Год назад
I've had both. With the B&W turnover ball, you obstruct the Shock mount bolt on one side. So if you plan to upgrade shocks do that first. Otherwise it is 3hrs of swearing and deconstruction/reconstruction to swap them. 2nd the B&W hitch that mounts in the turnover ball hitch is significantly heavier than the puck mount equivalent. It has a max 20k rating. The puck version comes in either 20k or 25k (for those that like overengineering). As for Goosenecking, yes the turnoverball has you set to go. OEM you need to purchase the ball and chain mounts.
@michaelkrause7672
@michaelkrause7672 Год назад
Very nice. Same steps I'm assuming for the 23 Superduty??
@PowerStrokeTechTalkwARod
@PowerStrokeTechTalkwARod Год назад
Did u watch the video
@michaelkrause7672
@michaelkrause7672 Год назад
@@PowerStrokeTechTalkwARod yes. Did I miss where you said it would work?? The only year I remember hearing is the truck you're working on is a 22 7.3.
@PowerStrokeTechTalkwARod
@PowerStrokeTechTalkwARod Год назад
This video was about the 5th wheel prep Install it had nothing to do with the fat man step
@michaelkrause7672
@michaelkrause7672 Год назад
@@PowerStrokeTechTalkwARod yup. Haha. I think we're reading things wrong... I'm talking about the install of the 5th wheel prep on a 23 Superduty. Are the steps/instructions for installation of the 5th wheel prep the same on a 23 Superduty as you did on a 22 Superduty... That was my original question. Sorry for the confusion.
@jasongriffin1127
@jasongriffin1127 Год назад
Even though that’s not a 6.7, can that truck tow with a basic Superduty rear leaf package and only a 10.5 Sterling?
@PowerStrokeTechTalkwARod
@PowerStrokeTechTalkwARod Год назад
Yesir
@jonathanbaum9190
@jonathanbaum9190 Год назад
You have any info on the in bed harness that works with the Pro Trailer Backup Assist? It has a second plug below the trailer light plug that works with the yaw sensor, camera, etc. I have a truck coming but did not order the 5th Wheel Prep Package as I was told it was a constrained item. Would really like to have all the correct harness for the Pro Trailer Backup Assist but can't find the part numbers. Also, a video on the Pro Trailer Backup Assist and how to hookup all the accessories that work with it might be cool. Can't seem to find much info about what comes with the truck and what you have to buy extra.
@PowerStrokeTechTalkwARod
@PowerStrokeTechTalkwARod Год назад
Watch our pro trailer video we did a yr agao
@rodstephens6612
@rodstephens6612 Год назад
P/N: LC3Z-13A576-F. I was in the same boat. Left off the prep package to ensure a shorter delivery time (4 months in the end) My dealer had a prep package ready for install when the truck was delivered. It only had the 7 PIN socket; the 7/12 was on backorder. So two months later the part arrived and the y installed it today. Now if I could only find a yaw sensor I would be in heaven, but they are rare as hens teeth.
@jonathanbaum9190
@jonathanbaum9190 Год назад
Rod Stephens, thanks for the help. I had found a very similar part number (L3CT instead of Z) in a picture on the internet but the dealer couldn’t find anything with it. Yesterday I stumbled upon a set of instructions under accessories on Ford’s website. The part number on those instructions is SKLC3J-15A416-AA. Went to my local dealer today and he also told me it was back ordered. He said he thought 7-10 days so I went ahead and ordered it. Hopefully it won’t be 2 months like yours. Also, the part number on the invoice was slightly different again…LC3Z-15A416-B. Not sure which part number is actually right, but good to know the parts are out there.
@jonathanbaum9190
@jonathanbaum9190 Год назад
www.fordservicecontent.com/Ford_Content/Catalog/accessory_files/2020_Super_Duty_5th_Wheel_Trailer_Tow_Kit.pdf.pdf
@mariormz4582
@mariormz4582 Год назад
@@jonathanbaum9190 so what is the part number for the correct harness that integrates with pro trailer?
@JMSynthetics
@JMSynthetics Год назад
Wasn't there a recall on the factory fifth wheel gooseneck setup at some point? Does this setup have any updates addressed by the recall?
@PowerStrokeTechTalkwARod
@PowerStrokeTechTalkwARod Год назад
Recall, no
@daddydiesel5889
@daddydiesel5889 Год назад
👍🏻
@PowerStrokeTechTalkwARod
@PowerStrokeTechTalkwARod Год назад
Daddy
@daddydiesel5889
@daddydiesel5889 Год назад
Did they buy it off the lot then? It’s pretty well worth it to order one and have it built that way right.
@PowerStrokeTechTalkwARod
@PowerStrokeTechTalkwARod Год назад
He had to delete it cuz production wld have halted
@daddydiesel5889
@daddydiesel5889 Год назад
@@PowerStrokeTechTalkwARod that stinks big time
@DeekJohnson
@DeekJohnson Год назад
Will I lose my bumper pull connectivity if I do this? Thx
@PowerStrokeTechTalkwARod
@PowerStrokeTechTalkwARod Год назад
Lol, did you watch the video.....?
@DeekJohnson
@DeekJohnson Год назад
@@PowerStrokeTechTalkwARod Did I miss it?? I guess I'll have to watch the whole thing again...
@PowerStrokeTechTalkwARod
@PowerStrokeTechTalkwARod Год назад
Goto where i hooked the wiring up you'll see what it does
@TheRealSlowhand
@TheRealSlowhand Год назад
Why can't I save the video for future reference or later playback...
@PowerStrokeTechTalkwARod
@PowerStrokeTechTalkwARod Год назад
Check ur YT settings. I have no effect on that
@jeffconley819
@jeffconley819 Год назад
Are the bed bolts reusable
@PowerStrokeTechTalkwARod
@PowerStrokeTechTalkwARod Год назад
Kit didnt come with new, so i reused
@tws7242
@tws7242 Год назад
Can you do one for f250/f350 trucks with no foglight what to do or to get
@PowerStrokeTechTalkwARod
@PowerStrokeTechTalkwARod Год назад
What do u want us to do??
@tws7242
@tws7242 Год назад
@@PowerStrokeTechTalkwARod how to install foglight I have a 2020 f350 STX that doesn’t have foglight, what do I need to get to be able to install a Oem foglight, foglight bumper.
@PowerStrokeTechTalkwARod
@PowerStrokeTechTalkwARod Год назад
Ahhhhhhhhhh i understand now
@tws7242
@tws7242 Год назад
@@PowerStrokeTechTalkwARod thanks kp up the awesome content.
@PowerStrokeTechTalkwARod
@PowerStrokeTechTalkwARod Год назад
Pppppreciate chu
@viaswords4888
@viaswords4888 Год назад
18:50 you've done way too many upper oil pans 😂
@PowerStrokeTechTalkwARod
@PowerStrokeTechTalkwARod Год назад
🤣🤣🤣🤣🤣🤣🤣🤣🤣🙄🙄🙄🙄🙄🙄
Далее
Stray Kids "Chk Chk Boom" M/V
03:26
Просмотров 28 млн
Ultimate Gooseneck vs Fifth wheel hitch for RV showdown
10:28
The Secret Service During The Assassination Attempt
7:42
Demonstrating how various Fifth Wheel Hitches work!
12:08
How to hook up a gooseneck trailer
11:15
Просмотров 1,8 млн