Ford Focus 1.6 TDCI Engine service procedure (oil, air & fuel filters) mk3

Подписаться 60 тыс.

Просмотров 114 тыс.

50% 1

Step by step Guide on How to carry out engine service on Ford Focus 1.6 Diesel TDCI Engine 2012 model.
Engine oil and filter change, Air filter replacement, fuel filter replacement and how to reset the service light. Service carried out using Purflux filters.
Check out the diagnostic machine I use - diydaly.co.uk/...
Any Donations to help Support my Channel are much appreciated.
Donate via Paypal - paypal.me/diydaly
Check Euro car parts for filters etc - tidd.ly/3lIO7xA (use discount codes on site)
Service kit Ebay - ebay.us/iECTCH
Engine oil eBay - ebay.us/Vkvb8k
4L Engine oil amazon - amzn.to/3ujyWPp
Brake cleaner eBay - ebay.us/lR0dDo
Tools :
Shallow socket set 3/8 - ebay.us/aDzBza
Suction pump - ebay.us/LomSm7
Primer pump - ebay.us/42gY7E
Milwaukee 3/8 battery ratchet - ebay.us/AqHrTq
3/8 Digital torque wrench - amzn.to/2PP9vpP
3/8 standard torque wrench - amzn.to/33eZsxj
Socket set - amzn.to/3eGx2Ak
Brake cleaner sprayer - amzn.to/2BLF1gX
Long reach 3/8 ratchet - amzn.to/3iJsADg
Ring Inspection Lamp - amzn.to/3gGWHcG
Torx screw driver set eBay - www.ebay.co.uk/...
Pic set - amzn.to/33JcZyJ
Dewalt 3/8 impact driver - amzn.to/3njemLY
Screwdriver set - amzn.to/3jswgJP
Oil capacity :
3.85 Ltr 5w30 fully synthetic engine oil
Torque settings required:
Oil filter cap 25NM
Sump plug 35 NM
If you found this video useful, please Like Share and Subscribe to help grow the channel, and never miss any future content. www.youtube.co...
Please also check out my website - www.diydaly.co.uk where you'll find top quality goods, tried, tested and recommended by actual mechanics.
DISCLAIMER: Links included in this description might be affiliate links. If you purchase a product or service with the links that I provide I may receive a small commission. This doesn't effect the price you pay!

Опубликовано:

29 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 88

@diydaly 3 года назад

Check Euro car parts for filters etc - tidd.ly/3lIO7xA (use discount codes on site) Check "Car Parts for Less" - tidd.ly/2LNEwIn (use discount codes on site) Service kit Ebay - ebay.us/iECTCH Engine oil eBay - ebay.us/Vkvb8k 4L Engine oil amazon - amzn.to/3ujyWPp Brake cleaner eBay - ebay.us/57pfYI Tools : Shallow socket set 3/8 - ebay.us/aDzBza Suction pump - ebay.us/LomSm7 Primer pump - ebay.us/42gY7E Battery Ratchet - ebay.us/Z8FZbP 3/8 Digital torque wrench - amzn.to/2PP9vpP 3/8 standard torque wrench - amzn.to/33eZsxj Socket set - amzn.to/3eGx2Ak Brake cleaner sprayer - amzn.to/2BLF1gX Long reach 3/8 ratchet - amzn.to/3iJsADg Ring Inspection Lamp - amzn.to/3gGWHcG torx screw driver set eBay - www.ebay.co.uk/itm/142442401623 Pic set - amzn.to/33JcZyJ Dewalt 3/8 impact driver - amzn.to/3njemLY Screwdriver set - amzn.to/3jswgJP

@grahams216 Год назад

TIP......REMOVE FILTER BOX TO IMPROVE ACCESS TO THE DODGY PLASTIC NUT ON THE OIL FILTER HOUSING I struggled to undo the oil filter nut as I only had a spanner that was big enough to fit but there wasn't enough room to properly fit and turn the spanner due to poor accessibility. The air filter box is easily removed as you just undo an electrical connector and then just pull it out from the rubber mountings. Bingo - managed to undo the tightly fit oil filter housing with the spanner and adjustable wrench, without looking for a suitable socket or tool to purchase.

@diydaly Год назад

👍

@rudger1913 Год назад

Hey. Can overfilled oil cause problems on newly fitted dpf and oil fog located on the valve cover? Also saw some oily signs on throttle body, seems oil in the pipes after the turbo.

@diydaly Год назад

It can if it’s a lot over! Just a little won’t harm arnt thing

@ciaranmccormack4434 8 месяцев назад

Instead of using ‘a sucker pump’ as you stupidly put it, just fill the filter with diesel before you put the seal on top of it…………………

@andyasquith5216 4 месяца назад

Priming the filter is a bit of an arse ache. Prior to fitting the top, you will need to keep your finger over the drain hole. Otherwise, it will pish diesel everywhere. Prefer to use the pump, and then you can guarantee no air between the filter and HP fuel pump. Hey, ho, though, each to their own. There's more than one way to skin a cat.

@vmaxchad3179 Год назад

Really helpful video having not worked on a diesel engine before. Nice One!!!

@diydaly Год назад

Glad it helped 👍 thanks for the comment

@raymonddavies8517 4 месяца назад

Thank you for the informative video. Couldn’t get the car booked in for a service so I tackled it my self. Easy to follow and job done !! Cheers buddy 👍😃

@diydaly 4 месяца назад

Great to hear!

@e.m.d.u Месяц назад

Sehr gutes Video, hat sehr gut geholfen. Ford Grand C-Max 1.6Tdci, EZ:2011; 8566/AUD ; 115PS Danke🙏 Hast du ein Video, wie man das Getriebeöl wechseln kann? Finde im Internet keine Infs darüber.

@vitaminez85 Год назад

Please how do you recognize 1.6 from 1.5 tdci engine for ford focus 2016 ? Thanks

@diydaly Год назад

they look exactly the same tbh, vehicle look up site the best way.

@Showing_the_car_ Год назад

Another really great, clear and well explained video - thanks bud. Luckily you have covered a lot of the cars I have had. Now if you could just change the front nearside suspension and service a 2014 BMW Z4, I'd be sorted 😁

@diydaly Год назад

Thanks 👍 comments much appreciated! haha I will if I ever get one in! think we only have one that comes in every year just for an mot!

@Zdravlje_i_Znanost 8 месяцев назад

Tnx sir great video, Can you do front and fear brake pads and disk replacement video if got client in garage please. Tnx.

@diydaly 8 месяцев назад

👍

@user-uo3ll1ym1s 9 месяцев назад

🤔👍

@Maveric193 8 месяцев назад

Thank you for your time making these excellent videos. Always look forward to the next one. Didn't really know where to post this question but I need to know the best way to remove contaminated diesel from the fuel tank in a ford focus 1.6 tdci mk3 2014 please, without having to drop the tank. Could you advise please. Many thanks.

@diydaly 8 месяцев назад

There might be a drain option via diagnostic machine but if not with a pump I’d try sucking it through the supply pipe to the fuel filter

@sjfortune Год назад

Hey. Without a suction pump is the fuel filter ok just filling it up? I've read a comment on here that someone had a new code after their DIY with maybe air in their system. If you say its no big deal i'll keep to that, otherwise I can make a makeshift handpump and take the air out, or i'll buy one and do it properly. Thanks in advance.

@diydaly Год назад

Yeah just fill it up , they need bleeding to make it a lot easier but won’t need any coding doing

@ANDY-we7mr 7 месяцев назад

Good video thanks for sharing that very well explained the slump plug on a ford focus mk3 titanium x diesel 25 num

@diydaly 7 месяцев назад

👍👍

@kevinbrown8960 2 года назад

Hi great video , what size pipe on the priming pump do I need.

@diydaly 2 года назад

im fairly sure it was 8mm mate

@mateuszgrochmal8707 2 года назад

Why do you use Castrol edge 5w-30 LL (gold) not Motorcraft 5w-30 5A/5B? In my car book is recommended 5A/5B, spec wss-m2c913-c. I heard, people use Castrol but magnatec (green). Nice change

@diydaly 2 года назад

Thanks , it was a while back I did this so will have to check back mate

@daraghkellett9389 8 месяцев назад

Great video well explained.. would you know how to get the intercooler off theres not much room

@diydaly 8 месяцев назад

👍 can’t think without looking tbh mate , was a while ago I did this one

@patrickkparrker413 Год назад

These torx ratchets are far too over used now .

@diydaly Год назад

👍

@UndercoverDog 7 месяцев назад

Him touching the oil with his hands remembers me of Gordon Ramsey touching all the expired food with his bare hand at Kitchen Nightmares

@davidwilkinson9360 Год назад

Thats a brilliant video. Do you think i could pre fill the fuel filter if i dont have a suction pump ? Thanks

@diydaly Год назад

Yeah it always helps

@raduflorian7037 2 года назад

I think on these models the cartridge oil filter is best to be fitted first because of that nipple..and afterwards put the cap back on..and tightened to spec..again..just my opinion..other that ..top job...

@diydaly 2 года назад

Yeah I’ve done it that way sometimes, it can sometimes be tricky to feel for it locating otherwise 👍

@filipemendes2518 Год назад

I have done exactly as you demonstrated and it was very easy to do, having said that, I decided to take a small coca cola bottle of coolant direct from the reservoir with a hand pump, which I subsequently replaced with neat coolant as my focus was running a bit on the rough due to the cold weather that we been experiencing. Now my temperature gauge is fluctuating from cold to hot and back to cold primarily when I stop the car from a morning journey to work, worries me all the time. Today I decided to take a different route through the m25 on my way back home. It fluctuated once toncold when I slow down due to traffic, put the heating on HI and drive pretty much for an hour without fluctuating and kept to normal temperature, on arrival at home the gauge kept right in the middle of the temperature display for a while as I kept the car running to observe if it would fluctuate again which it didn't. Could you help me to diagnose what the issue might be as the car runs perfectly, no warning lights on dashboard. The vehicle is a 2013 Ford focus titanium x 1600 diesel Any imput will be much appreciated. Many thanks.

@diydaly Год назад

Seems odd, may be bit of air in the system.. but if you only took that small amount out its unlikey.. first step I would try bleeding the system at the bleed points

@seanflannery5728 2 года назад

Interesting video , my focus mk3 has started sounding rough, I'm told it's the injector, I have a 1.5 diesel. Is there anyway to fix this without costing a fortune.

@diydaly 2 года назад

Neh I’m afraid there bloody dear injectors 😬 best get it checked first though .. it could be a completely different fault

@GSF404 Год назад

Is this procedure similar for the C-Max of the same year, the engine bay layout looks 'more or less' the same. I ask as I am getting a weird 'Engine Malfunction Service Now' light when going to about 3,000 RPM which generally seems to be fuel filter related it seems.

@diydaly Год назад

yeah should be very similar mate 👍

@GSF404 Год назад

@@diydaly is there specific torque settings for fuel filter housing or just, hand tight?

@diydaly Год назад

@@GSF404 I’ll try find out , not come across one before but it’s definelty not a lot , just abit more that a light nip I’d say

@patrickkparrker413 Год назад

I've just changed my rear break abs censor th traction control light stays on when the engine is running despite being turned off , do you think it needs to be re set , thanks .

@diydaly Год назад

Abs faults clear them selves if the issues sorted , once fitting the sensor you Amy need to drive over 15mph

@patrickkparrker413 Год назад

@@diydaly I drive on the motorway , anyway the problem ( not " issue " ) is the steering censor.

@diydaly Год назад

@@patrickkparrker413 👍

@joshuatownsend7814 Год назад

If it was not for this video too day me and my pals would have been lost

@diydaly Год назад

nice one , glad it helped 👍

@CarloLeonKolega 2 года назад

Got P2291 Code, engine went to limp mode after filter replacement. Also, is the mann filter supose to rattle a bit in the housing?

@diydaly 2 года назад

That’s a fuel pressure code , may have been due to air in the system or a leak.. it shouldn’t rattle no mate

@CarloLeonKolega 2 года назад

@@diydaly I called the part store, they told me that all of them rattle, I heard it over the phone xd wierd... Is it possible that the whole batch is faulty?

@diydaly 2 года назад

@@CarloLeonKolega I’m not sure tbh mate , I’ve not known them rattle before

@medsalhi9445 3 года назад

Hola soy hombres . Yo micanico. Prefesona.coches . nasacito trabajo.

@diydaly 3 года назад

Thanks for the comment

@johnysmart8545 2 года назад

that looks like a psa (peugeot/citroen) engine

@diydaly 2 года назад

Yes it is mate 👍 same as the 1.6 hdi

@terminalvelocity5995 9 месяцев назад

Great informative video, now going to do it to mine😊

@diydaly 9 месяцев назад

Glad it was helpful!

@hoogerbooger5862 9 месяцев назад

Very clearly presented. Thank You

@diydaly 8 месяцев назад

👍👍

@simoncsaby3073 2 года назад

HI. can u check please how much A/C refrigerant going in your car because i have same car but my paper its missing under hood and i want to top up. please if u can answer me asap. thank you

@diydaly 2 года назад

I’d need your reg to check , it’s should be around 450-500

@simoncsaby3073 2 года назад

BJ60GFG it's here sir

@simoncsaby3073 2 года назад

@@diydaly can u check please. BJ60GFG the reg

@diydaly 2 года назад

@@simoncsaby3073 460g mate

@simoncsaby3073 2 года назад

@@diydaly thank you mate 🤗

@CarloLeonKolega 2 года назад

egr valve cleaning on this engine?

@diydaly 2 года назад

Yeah I’ve cleaned them before mate

@CarloLeonKolega 2 года назад

@@diydaly nevermind. I just done mine yesturday. Damn that bi*ch was stuck inside.

@davidcairns4076 Год назад

Thank you.

@diydaly Год назад

You're welcome!

@ianrimmer1968 3 года назад

Good video! 👍

@diydaly 3 года назад

Thanks for the comment Ian 👌👍

@chiritanita 2 года назад

bravo boss..

@diydaly 2 года назад

Thanks for the comment 👍👌

@gerardomanuelgomez8635 10 месяцев назад

👋👋

@diydaly 10 месяцев назад

Thanks 👍

@gerardomanuelgomez8635 10 месяцев назад

I was going to put applause but I don't know what I put. Thank you very much for the video, it has helped me. Greetings from Spain

@diydaly 10 месяцев назад

@@gerardomanuelgomez8635 glad to hear it 👍 thanks

@OriginalDrums 3 года назад

Hi mate! Great content. Is it a pain to do a semi auto clutch in a ds5?

@diydaly 3 года назад

Thanks for the comment 👌👍 I’ve not done one a a ds5 tbf mate , I have on a ds4 and it wasn’t too bad to do .. not sure if you need to take the subframe down or not and you’ll need a diagnostic machine to set the clutch back up 👍

@wellazwashy516 2 года назад

This guy is amazing. Quick educational clip for anyone no matter how thick one can be. The only part l didn’t get was when he put back the fuel filter. The in and the out flow. How did you do the fuel suction and is there any other tool or method of doing it if l don’t have the pump like you got? Please Advise. Thank you in advance

@diydaly 2 года назад

Thanks for the comments! You could your a real basic primer pump .. other than that , best approach would be to brim the filter with diesel first the keep cranking plus some brake cleaner or east start in the intake to help .. not really advisable though.. priming is the best approach 👍