Ford Focus Third Gen - Front Bumper Removal How To Guide Mk3 (2011 - present) 

Thanks for taking the time to record all steps both to remove and replace the bumper. Really made the job so much easier.

Man the patience you have doing the job and recording at the same time thank you

Thanks for taking the time for this job! I really don't understand the 4 thumbs down, this was a lot of work, and a great, detailed video. I was trying to replace the oil filter and was surprised at the number of bolts to remove to get to the filter. I left the parts off after the last oil change so I guess i will have to see if I loose fuel economy. Thank you again.

Thanks brother, this video was a great help for fixing a collision with a snow mound that busted a bracket and pushed the bumper out of its seating. Its definitely a lot easier by the looks of it when there aren't icicles and snow all over the undercarriage.

Yes! Thank you!. My bumper was hit by a semi tread on the interstate and you just saved me a lot of money. I can totally do this myself now, like I usually do on cars I've owned.

Great vid. I hit some packed plowed snow with my 2012 focus yesterday and cracked my front left corner of my bumper in various spots around the fog light. Fog light still works. Sensors went off though and check engine light and I plugged obd scanner in it and its all evaopative sensors and 02 things. It doesnt look bad but I hope nothings jacked up that bad. Hopefully I can skate by for less than 800 or a grand 0o

I’m at the junkyard watching this, thanks!

Excellent ! Exactly what I needed to know, especially the bumper bracket. Thank you. o/

Great Video. I'll be installing a tow bar plate tomorrow and this vid is all I need. Once again son, thanks.

How long did this take you? Im doing this on tuesday and I need to plan a little bit?

Thank you from Germany

The best

Great video! is it possiblec to get a picture of the screws that were circled in yellow? the guy who "FIXED" my bumper did not put them back, instead he decided to use lumber screws and made his own holes.

If i wanted to replace the plastic front bumper pieces with a honeycomb grille does the bumper have to come off, or can i get at the pieces from under the car?

Thank you! It was very useful.

Thank you so much lol

Is it the same method for 2014 Focus ST? Going to attemp to change the intercooler. thanks for the video

very helpful video, thanks man

Very nice video, thank you.

Great tutorials! Subbed!

Thank you it very good.

One of the things that pisses me off about my Focus, that my 09 Rav4 Limited doesn't do is how much b.s. you have to do. I need to change the horn on my Focus. Apparently Ford felt this much effort made more sense than mounting it on top. How long does all this take start to finish including putting it back, an hour?

Nice work!

Great video!!!

Was going to buy an intercooler for my ST... This looks like a right headache NGL 😢

What is the name of the part that is on the top of the bumper. The first thing that you start to remove after the headlights?

do you have a video on replacing the radiator that vehicle, thank you

Where are the crash sensors? Should we worry about those?

why is your coolant level below minimum?

Does the top plastic panel thats connected to the top of the bumper come off?

i am trying to add a lightbar behind the grill and thinking about cutting the middle plastic tubing in front of the radiator, wondering if i do decide to cut, what would be the negative impact if doing so?

Hi do you know where the front impact sensors are located?

Whats the part name that the bumper support clicks into?!?!?!!? im continuously looking everywhere but i cant find it :(

hi my ford galaxy 2011 diesel showed an engine management light. later with diagnostic the message was... "Lost communication with active grille air shutter module A". what i need to replace? temperature sensor! regards

What are the names of the plastic that goes on the lower radiator support

Good video.

Is this the same for the focus ST?

any idea on the easiest way to get to the horn. I think I need to check the wiring or replace.

Can anyone tell me what the plastic box behind the APF is called? Mine is cracked and want to replace it but not sure what its called.

Спасибо дружище!!! очень помог!!!

very help , thanks you + big subscribe

can u get to the horn by taking out the headlight or would it be best to go underneath

do you have a video on how to change a horn on a 2012 focus

Do i really need to have that thing that covers the engiene from below... because mine broke and i took it off.. but my dad says that i need it.. can i buy one somewhere?

Vis hvordan udskifter xenon pære

Awesome!

what about to replace the radiator fan do i need to remove the whole front bumper ?

How to i remove the grill with the two chrome slots. I want to black them out.

I got a busted assembly foglight do I really need to take off the bumper?

А русских комментаторов нет что ли?

You're a brofessional

Somebody buy this guy a 3/8 drill with a torx bit, lol.

سيارة فورد غير جيدة دائمة الحماوة

first

Lots of plastic👍

Thank you so much lol

Hey is it the same for the 2015 focus?