In this video I go over a common complaint from owners that get a Ford remote start installed. Check me out on Facebook- pages/Ford-Tech-Makuloco/651813524932940
Just bought and installed a FORD remote start for moms 2014 Escape. Everything went together perfect. Had that "safety" crap, found your video and corrected it. Works perfect now. Thanks for the vid!
Easy directions to follow. i watched your video, then let it guide me through one more time. Now it works just like you described it would. I brought it to Ford and they told me it wasn't their product (it says Ford on the FOB) and refused to help. I have had my truck two years and finally have it figured out. Thank you so much!!!
Thank you SOOO much this information. I’ve been wondering about this and scouring the internet for years for a fix to this. I almost bought another remote starter because I thought this one was malfunctioning. Your content is always top notch. Your effort is very much appreciated.
I know this is an old video, but I'm so glad you still have it up. I hated this about my 2011 mustang gt and my local dealer just jerked me around when I called them about it. This saved me a lot of aggravation and time. Thank you.
I just followed the steps in this video on a 2014 Ford Expedition and it worked! This also fixed the issue of remote start not wanting to work after installing LED interior lights.
I went around with my local Ford dealership because this was happening with my 2014 Ford Fiesta... And they told me it was impossible to fix. Your video fixed it... Your awesome!
@@FordTechMakuloco I just tried this on my 2012 Expedition. Now the remote start doesn't work at all. When I push the remote start button, the horn chirps just like normal, then the doors lock, then the horn chirps four times. And that's it. Doesn't start.
Thank you so much for creating this video. I finally was able to fix my remote start, I thought actually something was wrong with the car when I first got it
You just saved the day! This video was so helpful because the ignition switch broke in my brothers car RIGHT after he spent almost $400 service. *fistbump*
Works perfectly. Most difficult part was finding the override button. Mine was hidden pretty well! Thank you so much for your help! I subscribed to your channel and liked your Facebook page!
Yo!! I love this dude. Your videos are so stinking accurate that you make me feel like I am smart. You have saved me yet again. Thank you for contributing to my extreme happiness.
You always have the perfect videos for any Ford situation. I installed the remote start on my 2010 Milan and it doesn't do this, but my mom's Expedition does. I'll have to send her this video. I didn't bother installing the hood switch -- don't trust drilling holes in Wisconsin and it's a fail-unsafe design anyway. System works even if the switch isn't connected. Dumb that Ford lets you buy the kit but the installation instructions are damn near impossible to find. And if they're going to go through the extra manufacturing/tooling steps of having excess loops of wire under green tape, why not spend the extra 10¢ on just having a molex connector ready-to-go under the dash?
Great video! Had to remove panel under steering colume of Taurus to expose Remote start modular. From there I followed wire harnes and found the LED and Button. Thanks so much.
I used this for my 2018 Transit when I got it new in July, and I love it! One question though, do you know where I can find a copy of the menu tree for the options? I want to change some settings but I don't want to bumble around blindly.. Thanks!
You rock!! Where can I get a list or table of all bank/option numbers, showing what functionality each option toggles? Been googling for it with no luck.
damn you are such a big help thank you so much for the video. helped out so much.. just bought a used 2012 expedition and your other video for getting out of service mode helped too.. i am now a subscriber to your channel keep up the good tips.
Love your videos! Question- I want to disable this auto off feature on my 2012 fusion (bi-directional starter) but there is no switch or light! Instead, I have a box that says it’s part of this system. The box has a harness attached to it, so I’m not sure if mine has this setup. Can you help me find the program mode?? Got the older 2-way installed in 2014/15ish
Great video, thank you for posting this. My question is does this same procedure apply to the factory remote start system in my 2013 Expedition? As it is now we never useit because of it shutting off all the time. Thanks
If yours does this same thing yes, your should be a standard full wire in like this one I installed. You will know if yours is the same if the key fobs are the same as the one shown.
Thank you I found the problem the chip to my key broke off I put it back together taped it good and my car started right up thank you So much for your help god bless you
janet perez Yeah that is what I was figuring and that is what I was getting at with the questions I asked I have seen it before. Glad you got it all sorted.
Absolutely amazing! As soon as I watched this video I tried it in my 2016 Ford Fiesta. Took me a minute to find the module. As soon as I did it worked like a charm and exactly as described. Thank you so much. I was getting ready to have a local electronics place install the Viper Remote Start system in my car because I've had it in the past and loved it. This made the factory remote start manageable. Now I need to experiment with range to see if I still need the upgrade. For now this is perfect!
Great video thanks but no matter what I do my 2008 ford edge will not start. I get 4 beeps and then no start. I downloaded the pdf on how to go through the procedure but nowhere can I find out what 4 beeps mean with a no start
THANKS!!!! I APPRECIATE IT SO MUCH. I've dealt with that BS for 3 years!!! Now, how do I turn off the damn annoying door open/seat belt sound??? 2019 transit 250.
Will this work for a 2018 ford transit? I don’t mind the 1 honk to let me know it’s on but when I go to open the door it turns off and I have to use the key to restart the van which is very irritating. My other vehicles I can remote start and just jump in and put the key in and go. If I miss a step will i have to reprogram the whole thing? any chance of messing up any other systems? Your advice and help is greatly appreciated
FYI I just installed a bidirectional unit in my car that was dated 1/20/16. It does not have the shutdown problem, and it also does not have an option 7 in bank 2 (only goes to 6). So it appears the shudown feature has been removed in the newest produced units.
Thank you Very Much Brian, I have a 2012 Ford Escape I lost my Remote Key start key fob For. Will I be able to by a "Genuine Ford" remote Start Fob and Program it myself? (I only have 1 Key but I have the other Fob)
I have a 2011 F150 Lariat 3.5 Ecoboost that has this exact problem when trying to program a new key. All things remote work, including remote start. However when I put the new key in the ignition and into the "ON" position, the engine dies. The original keys continue to work normally, but the new key kills the engine. I can remote start, and then switch to an original key in the ignition and all is good. I searched under the dash, but could not find the reset button. Is that present on the 2011? Great videos!!
I followed the instructions per the video without fail. Thing is that when I start using the brake pedal to cycle through to option 7, on the 5th depression of the brake pedal instead of the horn honking 5 times it honks 6 times and on the 6th depression it blows 7 times instead of 6. So it is to say that the LED does not turn off. Is this a system protection for the disabling of the security system?
Mr. Ford Tech I have this weird box in my 2009 Ford fusion. It's tapped into a single wire behind the ODB2 and ground. Was wondering if you could help me identify it only has writing "this side down"
Hey man. So I have a 2011 Ford Taurus Limited. I know my way around working on vehicles and I followed your instructions to the tee. When I get to option bank five and attempt to press the brake pedal I get no feedback. Like my brake pedal is not the correct input or something. I've tried everything. Any ideas?
planning on attempting this on my 2014 Lincoln Nav. when it's warmer than 0 degrees. It has the same looking remote starter and most of the components are Ford. Any reason you think it won't work with Lincoln? I looked quickly for the remote reboot button with no luck would it be somewhere else?
Brother. I have 2010 mustang GT which came with 2 stock remotes (lock unlock + engine start). I want to upgrade both my keyfobs to 1 single keyfob which can all in 1. Can you help and advise how do I do that?
Hey brother, fixed my new to me 2015 focus. Next thing is to use your video to extend remote run time to 15 minutes. Do you know if the instructions for the programming options are avalible to the public? I'd like to disable the horn acknowledgement on remote start-up (I can get by with the parking lights flashing). Anywho thanks for your videos!!!
To sort of springboard off of this, how do you program the remote start when it's an intelligent access key? I had to move my remote start unit to change the cabin air filter, now the car will not remote start, with the error message "Ford Keyfree not detected" on the IPC panel and the alarm starts going off. Does work when the key is in the car. Couldn't find any documentation regarding this problem.
Great Vid! Question: My remote start:sometimes but rarely Starts (runs fine as long as Ac or Heat isn't on, if they are on it'll turn off within 1min), starts to work but then honks twice, and/or starts to work but then honks six times! Do you have any idea what's going on and/or how I can fix it/ Vehicle: 2010 Ford Mustang Thanks
Worked perfect for 2019 Transit 250.. Thanks much for taking time to make this video ! . Now if I could figure out how to stop the horn every time I activate remote start .. Is there a way ?
If it factory installed then there should be an option in the instrument panel for either QUIET START, or maybe it might be called Stealth Mode. (havn't done it myself yet,but found it looking for how to keep the car running when i open the door)
I have 20011 SHO with push button start. pushed start button without pressing brake to start accessory mode. couldn't get past first step. Process different for this model of Taurus?
I have a 2014 Expedition with a AL2J-19G367-AA remote start. I was having the issue in this video. I tried the setup you described, but I managed to break the remote start. I verified the doors and hood are closed. I pressed the remote start, one honk, no theft alarm, everything turns on in the vehicle, and the horn honks 4 times, but no start. Can you help me or guide me to a manual for this model system. Thanks Randy
This is a great feature!! The other morning I had my MKZ warming up when a drug addict tried to steal my car while I was on the far end of my home. She moved not even an inch. As soon as she touched the brake. Nothing. I promptly called the police from there. The system will protect your car from being stolen in remote start mode!!!!!!
I am having wierd issue where my 2003 explorer drivers side door lock don't work inless I have the key in start or vehicle runing mode. I think it has something to do with the remote start system. Even then door lock code outside don't work inless the vehicle is running or run position.
Hi, I'm super Hyped to have found this video! I'm hoping you can help me find that programming button on my 2012 lincoln MKZ? It's almost identical to the featured Fusion in the video, but i cant find that black button thing in the footwell anywhere! Is it any different on Lincolns? My remote key looks just like urs but has a Lincoln logo. Thank you for making this video.
Hey I like the fix but I have a different situation. My 2012 Taurus is a push button start, so what is the process if I cannot turn the key to run without starting the car?
I cant get my car into program mode. I have push to start and I've tried with/without the brake pedal and in accessory/power modes. All of the manuals say to hold the brake and turn the key but thats what starts my engine? I got it once but had trouble cycling through the menu with the brake pedal.
I have a 2014 escape with a push button start also factory installed remote start the problem is similar but it just runs for approximately 30 seconds and dies out when it dies out a red blinking light activates between the fuel and temp gauge Any thoughts?
Is there any letrature on this topic? I have purched several online manuals for my 2012 Lincoln MKT and cannot even find how to remove broken passenger mirror!
FYI I was not able to perform this on my 2010 fusion with an add on oem remote start ie single button fob; after performing this procedure my car would sound horn 4X to indicate programming was incomplete. This was verfied by 800 Ford key service line.
please help me out i was following the steps from the video above on setting 7 I hold button for too long now the remote start chirps 3times but doesn't turn on . thanks in advance
I have the same issue but with only 1 of the 2 keys I have(2011 F-150) The problem key starts the truck remotely and when you put the key in, it dies. Started 2 months ago(bought it in Aug/18) Now when you put the key in the horn starts blowing until I hit the panic button. Change of battery did not help.
Hi! Please help me in my situation. I bought Mustang 2011 and it has factory installed remote start system. But I didnt have Key fob for Remote starting vehicle. Car last user lost keys for remote start. How can I repair my key fob?
I had problems with my new 2017 ford transit 150 van... They installed to my for me.. And after 10 days it's star to have problem.. When I push remote starter button there is signal into the van and starts to give clicks but it's not starting... Can you tell me what the issue and how to solve this problem.. Cause ford company they don't have appointment to do it right now and the earliest is after Thanksgiving
Hi Makuloco, I tried to change the remote starter again. 5 toots and 7 honks then press remote starter button once, it still doesn't work the car just wont start. Do you work in MA or RI? I'll bring the car to you, or can you tell me how to reset the remote to company settings. Thanks, Marcel.