Ford Transit Connect Full Clutch Replace Part 2 Bodgit And Leggit Garage

Ford Transit Connect Full Clutch Replace Part 3 Bodgit And Leggit Garage

Восстановление Насти Туман после ИНСУЛЬТА. Реакция Бати.

«Убийца моей мамы выходит на свободу»

Comedy Moments 🤣 #2

Палач VS Алый Зверь - БОЙ ОПАСНЫХ КУЛАЧНИКОВ. Мага-Мага VS Захаревич. Блуд. Вызов Мазуру. Камбулат.

Ford Transit Connect Full Clutch Replace Part 1 Bodgit And Leggit Garage

bodgit and leggit garage

Подписаться 67 тыс.

Просмотров 71 тыс.

50% 1

Видео Поделиться Скачать Добавить в

www.gofundme.com/antilagforco...
business and permissions inquires bodgitandleggit@gmail.com
bodgit and leggit garage
tips and tricks inside this video hopefully help you
don't forget get your hands dirty
www.bodgitandleggitgarage.com/
bodgitandleggitforum.editboard...
bodgitandleggitgarage.spreadsh...
/ bodgitandleggitgarage
/ bodgitandleggitgarage
Ford Transit Connect full clutch replacement part 1
In this video we show how to remove the gearbox from a Ford Transit Connect ready and waiting for the new clutch kit to go in

Авто/Мото

Опубликовано:

7 фев 2017

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 114

@manzdoingbits766 4 месяца назад

Top tip plenty of room to pry drivers drive shaft out so do this side first and flat head head screw driver threw gear box to tap passenger shaft out light work 👍👍👍👍

@gabrielpenkuhn Год назад

thanks so much for these videos, they helped me greatly to take of the gearbox and repair the hydraulic clutch.

@retrorestore 7 лет назад

I remember doing that on my Mondeo on the floor. Oh to have a proper lift lol. Nice job Leon.

@bodgitandleggitgarage 7 лет назад

retrorestore you did extremely well with yours on the floor mate my hats off to you been there done that no more lol

@nelsonsmith6702 8 месяцев назад

Saved my ass, that first piece popped off and you had me driving again fast. Thank you

@STEVIBOY69 Год назад

Down to earth crack and at least he explains everything as he goes to help the DIY folk

@andrewarmstrong4710 6 лет назад

Mate that Ford Sierra in the bubble looks mint. 👌

@andytaylor9032 7 лет назад

Great vid , look forward to part 2 pal. Loving the long 3/8 ratchet 😀

@bodgitandleggitgarage 7 лет назад

Andy Taylor yes they're at it it is cool lol everyone should have a long shiny ratchet lol

@wayneholden6581 6 лет назад

Good video unlike some what people put on what are just a waste of time . I'm planning on doing my own connect clutch this next week not looking forward to it but needs doing . Learnt a lot watching all 3 parts look forward to more videos . Keep up the good work 👍👍👍👍

@bodgitandleggitgarage 6 лет назад

thanks a lot mate

@rj57and 7 лет назад

Nice vid mate. Posted to a few of the owners clubs for the connect I'm on 👍🏻

@bodgitandleggitgarage 7 лет назад

HaveAgo Harry thanks alot mate much appreciated

@moxietube 6 лет назад

thanks a lot . your video helpt me a lot .keep up the good work , so i can keep my hands dirty , greetings from holland

@bodgitandleggitgarage 6 лет назад

thanks you mate

@vanillagoose4444 5 лет назад

I just drilled spot welds out on bumper bar and took the full shebang out ! Engine the lot even left the n/s driveshaft in there, much easier

@stevepulsar 4 года назад

Great video production, I watched this with the intention of doing my own clutch but this video served as a warning to keep my mucky fingers off unless I want a sore back and lots of headaches 😂😂😂😂

@bodgitandleggitgarage 4 года назад

Thanks a lot mate. It really isn't too bad. There is part of that awkward and it's certainly will take a long time. But it's definitely manageable if you just allow yourself a few days.

@stevepulsar 4 года назад

bodgit and leggit garage Thanks I don’t have a garage or ramps so unless laying on the floor is good for you it’s out of my repair range I’m afraid👍

@bodgitandleggitgarage 4 года назад

@@stevepulsar lol I've been there done that mate with Jacks on the floor on a stoney ground. It's not

@vdubs6068 7 лет назад

Great vid mate that driveshaft cup looked a right nightmare but at least box came out easy in the end

@bodgitandleggitgarage 7 лет назад

VWDiagnostics 60 just wait till the next parts and see the nightmare I had getting it out lol

@davidsstfarrelltighe 7 лет назад

well dude the fll80 looks class must get one keep the good work up and any word on the transit

@bodgitandleggitgarage 7 лет назад

david farrell tighe you will not regret it if you get one there is a video coming up soon on the transit the Beast lol

@philneale7290 7 лет назад

another excellent vid

@bodgitandleggitgarage 7 лет назад

thanks mate

@mrbmac1970 7 лет назад

Great video mate. Single handedly doing your own production and removing a gearbox at the same time is great bit of multitasking lol...keep up the good work , looking forward to part 2

@bodgitandleggitgarage 7 лет назад

lol thanks mate

@kaisonbrett755 2 года назад

i guess Im asking the wrong place but does anybody know of a way to get back into an instagram account? I somehow lost the login password. I appreciate any tips you can offer me.

@malachiraymond485 2 года назад

@Kaison Brett Instablaster :)

@kaisonbrett755 2 года назад

@Malachi Raymond Thanks for your reply. I found the site thru google and im in the hacking process atm. Seems to take quite some time so I will get back to you later when my account password hopefully is recovered.

@kaisonbrett755 2 года назад

@Malachi Raymond it worked and I actually got access to my account again. I'm so happy! Thanks so much you saved my ass :D

@johnhall3827 2 года назад

I Have a connect van which goes a lot of miles. I need to do the timing chain . Looking at videos of this job I think it is going to be easier taking the lump out. Do you think it would be a good idea to do clutch at the same time?

@STEVIBOY69 Год назад

Hope you can help ,do you have to lock the flywheel to remove it.all my flywheel bolts are shiny silver from the clutch rubbing, dont know how or what has caused it ,but I'm unsure if the flywheel needs replacing

@matthewreynolds6562 4 года назад

Mate where did u get that "one man ball joint remover" @ 14.50 I been looking for something like that in the UK but never found one

@old_con 3 года назад

Just watched this as I have part taken the gearbox out and needed to know how the gear cable linkage came out. Excellent explanation of what needs doing. I found that to get the driveshaft out you were right in pulling the gearbox forward (I used a medium length pry-bar) then used a long pry-bar leavening off the other pry-bar to get the driveshaft out. Many thanks. 👍🏽😎

@4WDIESEL1 7 лет назад

looking forward to part 2 and 3

@bodgitandleggitgarage 7 лет назад

thanks mate

@adamcaan4124 7 лет назад

Another great video mate, keep up the good work

@bodgitandleggitgarage 7 лет назад

Adam Caan thanks mate and thanks for watching

@brendo3314 7 лет назад

bodgit and leggit garage got the 2 facom on eBay + qbt 200 for 320 euros money well spent thanks for a great video your the champ

@bodgitandleggitgarage 7 лет назад

Brendo now you can have fun with them lol

@omerozdemir1221 6 лет назад

First of all great videos A+++ you have every detail covered.. I was wandering if you could put up a video for a timing + wet belt change on a ford galaxy 1.8 tdci. Cheers

@bodgitandleggitgarage 6 лет назад

Omer Ozdemir hi mate I've done loads of them but just haven't film One a good friend of mine has I will send you the link tell him I sent you😁😁 ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-e0_g06xpn4s.html

@omerozdemir1221 6 лет назад

bodgit and leggit garage thanks very much 😊

@scottaner500 7 лет назад

fantastic video as always

@bodgitandleggitgarage 7 лет назад

thanks mate

@scottaner500 7 лет назад

bodgit and leggit garage is that an 2008 one ?

@bodgitandleggitgarage 7 лет назад

Scott Tanner yes mate

@johnp6636 7 лет назад

The best way I find for removing the nearside cv joint from the gearbox is to remove the offside driveshaft first put a long flat blade screwdriver through the diff and tap on the end of the nearside inner joint.

@bodgitandleggitgarage 7 лет назад

Paul P you will see in the next parts that's exactly what I did nightmare lol

@anelectrician 5 лет назад

How much should I expect to pay for a full clutch change on a 2004 connect

@ManuelClemente Год назад

Chers mate 🙂

@hdog2259 7 лет назад

there is a easier way to get the drive shaft out the hub on these if you just undo one of the bolts holding the lower arm on there is enough movement to get the shaft out hope this little tip helps

@bodgitandleggitgarage 7 лет назад

harry morrell I do that sometimes just depends on the car

@neftalirosado6167 5 лет назад

Hello ! Ford Transit Connect it’s a general good car ?

@patrickmejlak9703 3 года назад

Where is the drain pipe air conditioning ford transit connect panel van 2012 thanks

@TylerAceOfficial 6 лет назад

14:43 " as you can see that works lovely" lmao

@bodgitandleggitgarage 6 лет назад

lol

@clarkie005 7 лет назад

tip mate: to get the inner CV joint out of the gearbox. get a rope or steel cable. tie it round the joint. feed a 6 foot length out. tie the other end to a 10lb sledge hammer. lastly swing the fucker like a golf club! I try to pry the thing out on my megane like you were doing and it would take budge. but first swing with the hammer method a popped staright out!

@bodgitandleggitgarage 7 лет назад

clarkie005 thanks mate we'll have to remember that for the next time

@jennifermaxwell4637 7 лет назад

Nice one☺

@bodgitandleggitgarage 7 лет назад

Jennifer Maxwell thanks jennifer

@Badgertronix 7 лет назад

nice work. Are you changing the dual mass flywheel as well? Have you tried a single mad conversion on one of those 1.8s?

@bodgitandleggitgarage 7 лет назад

Badgertronix hi mate there already was a solid flywheel fitted on this so didn't need to change it

@Badgertronix 7 лет назад

bodgit and leggit garage ah wow. Never heard of a 1.8tdci without a dmf. Is that standard on these?

@bodgitandleggitgarage 7 лет назад

Badgertronix he told me before he brought it the clutch was changed so maybe it was changed to solid I'm not sure I've seen some with and some without don't know who makes a decision it's just what I've seen

@Places2GoTravel 7 лет назад

Hi mate long time subscriber, it's been a while since I commented - I'm going to buy a Volvo v70 D3 2.0, around a 2011 plate - anything I should be looking out for mechanically o otherwise when I view?

@bodgitandleggitgarage 7 лет назад

hi mate just the usual really make sure the car is cold so you can see if there's any problems starting it if they warm it up before you can start it cold walk away make sure the clutch pedal isn't too hard look for service history take it for a good long test drive get everything warmed up that's all you can really do the parks that do go wrong with all modern cars you'll only know you've got a problem when they go wrong hope that helps thanks for watching

@Places2GoTravel 7 лет назад

bodgit and leggit garage Thanks mate as always very helpful :)

@johnhall3827 2 года назад

Use a ball joint chisel i find it works

@TylerAceOfficial 6 лет назад

i don't know if it's mentioned in the video but could someone tell me how much gearbox i need for my connect tdci? Is 2 litres correct?

@bodgitandleggitgarage 6 лет назад

Tyler Ace hi mate to be honest I never know how much a gearbox takes off the top of my head all you have to do is wait for it to come out of the whole you are filling it from then you know you at the correct level

@8ile 7 лет назад

What's the going rate for a garage to do a clutch repair? Like 2-3 hours labour + parts if not supplied?

@bodgitandleggitgarage 7 лет назад

8ile it all depends on the car but most modern cars you will not come near to finish the job in three hours

@omgboy0876 4 года назад

Very good video. I have same car. Is very complication car. I have a problem with the heater. I have change thermostat drive belt, Serpentine belt drive, etc. But still don’t work. I have to drive the car for more than 30 minutes to warm up a bit. If driving on the highway reaches normal temperatures. But after I get off the highway to the local road, the temperature starts to drop to a minimum. Can you help me, what can it be ? Thank you.

@bodgitandleggitgarage 4 года назад

Hi check the radiator fan switch and also check the temperature sensor when the temperature goes down can you put your hand somewhere on the radiator or the car to make sure it's hot what if it is hot then you've got a problem with the sensor

@125sm3 7 лет назад

Another great video, for stubborn drive shafts I use a cold chisel , there great they have a wedged shape end and you can hit the other end with a hammer and they come in various lengths and thicknesses and are cheap to bye. Can I have some advice on buying a mid end ob2 reader , any ideas ?

@bodgitandleggitgarage 7 лет назад

125 SM how much money are you looking to spend on a Scanner mate

@125sm3 7 лет назад

About £200 ?

@bodgitandleggitgarage 7 лет назад

125 SM the Delphi system is not too bad but you need a laptop to work it if you can go a bit more the Foxwell have some good scanners as well what you are really looking for is bi directional controls the more of them you can get the better

@bodgitandleggitgarage 7 лет назад

but for that sort of money unfortunately you will be limited even the ones at 10 and 15000 still don't do everything it's a minefield when it comes to scanners

@125sm3 7 лет назад

ok thanks for the info. Tony

@rileyfinney7776 2 года назад

I think we will get away with that.. yeah... or not.. haha legend

@lesterjacobs5319 3 года назад

Imagine I had the exact same thing with my petrol van Absolutely bollocks, I had to take the gearbox out and do everything you did, then didn’t even have the right alignment tool for the clutch. I know your pain, I’m still working on the job

@petesmith1995 7 лет назад

Just be lucky Leon your not doing that on your drive lol Oh good old days!!!

@bodgitandleggitgarage 7 лет назад

pete smith been there done that got the t-shirt excetera lol

@A1topmechanic Год назад

Isn’t easier by dropping the subframe??

@mrhanlon8299 3 года назад

I think I'll take it to the garage

@bodgitandleggitgarage 3 года назад

ok mate

@Lakesman5308 2 года назад

Hi Pal. Where is the reverse light switch ?

@bodgitandleggitgarage 2 года назад

Hi mate it will be on the gearbox

@roryobrien948 5 лет назад

This might sound ridiculously stupid but both driveshafts need to be removed, right?1

@bodgitandleggitgarage 5 лет назад

Hi mate not necessarily obviously both driveshafts have to be taken out of the gearbox differential housing but not necessarily completely out on some cars you can get away with leaving the driver side still connected to the wheel just depends on the car

@zoidberg444 7 лет назад

It sucks donkey dick when CV axles get stuck like that. Last one i had that stuck there was room to get a ball joint fork in there. I thought i was going to crack the gearbox casting. Holy fuck. What a bastard. I want one of those Facom 3/8ths flexi ratchet. I have an old half inch long handled one, but its to big for some stuff. I had a Chinese one from machinemart but i broke it twice.

@penf00008 6 лет назад

You made this simple job look extremely difficult 😂

@bodgitandleggitgarage 6 лет назад

Mr Olitor you need to watch my new video let's see if your put your money where your mouth is ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-n02vKSh8oVA.html but I already know the answer you will not

@penf00008 6 лет назад

bodgit and leggit garage I'm not having a go mate I was just having a laugh, but I've checked your video out and I'm definitely up for that, just tell me how and when.

@bodgitandleggitgarage 6 лет назад

lol ok mate

@penf00008 6 лет назад

bodgit and leggit garage I've just done a clutch cable on a fiat siecento.....maybe do a video on one of them lol I didn't swear much.

@amirbasssystem Год назад

And oh yes just split the harness

@liamdunckley7405 5 лет назад

Why dose everyone struggle with the n/s drive shaft, just remove the o/s side drive shaft and knock the n/s out with a hammer and leaver bar, so simple 😀

@liamdunckley7405 5 лет назад

Just watch the 3 episode and that's exactly what you did. hahaha

@bodgitandleggitgarage 5 лет назад

hahahahah

@jobswork3663 7 лет назад

U no got a snap on impact gun

@bodgitandleggitgarage 7 лет назад

yes mate 2 of them

@amirbasssystem Год назад

Just drop out the whole engine would be more Easy i guess

@burdoch1 5 лет назад

very helpful. Swear an cus as much as you like but cut out the Jesus Christ business

@bodgitandleggitgarage 5 лет назад

oh my god really

@tonygreaves6503 5 лет назад

Holy smoke !!

Далее

Ford Transit Connect Full Clutch Replace Part 2 Bodgit And Leggit Garage

15:08

Ford Transit Connect Full Clutch Replace Part 2 Bodgit And Leggit Garage

Просмотров 31 тыс.

Ford Transit Connect Full Clutch Replace Part 3 Bodgit And Leggit Garage

40:24

Ford Transit Connect Full Clutch Replace Part 3 Bodgit And Leggit Garage

Просмотров 30 тыс.

Восстановление Насти Туман после ИНСУЛЬТА. Реакция Бати.

36:53

Восстановление Насти Туман после ИНСУЛЬТА. Реакция Бати.

Просмотров 256 тыс.

«Убийца моей мамы выходит на свободу»

30:13

«Убийца моей мамы выходит на свободу»

Просмотров 382 тыс.

Comedy Moments 🤣 #2

00:25

Comedy Moments 🤣 #2

Просмотров 2,8 млн

Палач VS Алый Зверь - БОЙ ОПАСНЫХ КУЛАЧНИКОВ. Мага-Мага VS Захаревич. Блуд. Вызов Мазуру. Камбулат.

1:41:54

Палач VS Алый Зверь - БОЙ ОПАСНЫХ КУЛАЧНИКОВ. Мага-Мага VS Захаревич. Блуд. Вызов Мазуру. Камбулат.

Просмотров 134 тыс.

How To Repair Rusted Sills - Ford Transit Connect

11:10

How To Repair Rusted Sills - Ford Transit Connect

Просмотров 116 тыс.

TRANSIT CONNECT SILL PART 1

15:36

TRANSIT CONNECT SILL PART 1

Просмотров 50 тыс.

Transit 2.4 rwd tddi clutch and dmf part 1 - Andian Autos Motorsport

19:09

Transit 2.4 rwd tddi clutch and dmf part 1 - Andian Autos Motorsport

Просмотров 54 тыс.

Ford Transit Connect Clutch replacement

33:36

Ford Transit Connect Clutch replacement

Просмотров 92 тыс.

Poner la base Giratoria del Conductor en una Transit/Tourneo Custom

23:55

Poner la base Giratoria del Conductor en una Transit/Tourneo Custom

Просмотров 12 тыс.

Ford Transit Connect 1.8 TDDI Oil Change

9:42

Ford Transit Connect 1.8 TDDI Oil Change

Просмотров 28 тыс.

Transit mk7 New gear cables (piglet)

21:02

Transit mk7 New gear cables (piglet)

Просмотров 14 тыс.

FORD TORNEO CONNECT 1.8TDCI CAMBIO DE MOTOR COREA DE DISTRIBUCION BAÑADA EN ACEITE ROTA

23:28

FORD TORNEO CONNECT 1.8TDCI CAMBIO DE MOTOR COREA DE DISTRIBUCION BAÑADA EN ACEITE ROTA

Просмотров 18 тыс.

Waterpump Replacement on Ford Transit Connect tddi tdci

6:46

Waterpump Replacement on Ford Transit Connect tddi tdci

Просмотров 183 тыс.

Leak off test Ford Transit/testing for bad injectors bodget and Leggit garage

20:10

Leak off test Ford Transit/testing for bad injectors bodget and Leggit garage

Просмотров 158 тыс.

Лада Веста +25 см = Аура. @lenalisa33 #shorts Лиса рулит

0:34

Лада Веста +25 см = Аура. @lenalisa33 #shorts Лиса рулит

Просмотров 1,2 млн

Ваз 2110 лучше ехала чем этот 2.0 Opel.

0:24

Ваз 2110 лучше ехала чем этот 2.0 Opel.

Просмотров 1,1 млн

I put a NASCAR Exhaust on my 1969 Camaro... it sounds insane

0:35

I put a NASCAR Exhaust on my 1969 Camaro... it sounds insane

Просмотров 3,9 млн

‼️ТГК Itsbutovsky ‼️ #рекомендации #пит #мото #эндуро #питбайк #рек #bikelife #stunt

0:12

‼️ТГК Itsbutovsky ‼️ #рекомендации #пит #мото #эндуро #питбайк #рек #bikelife #stunt

Просмотров 1,3 млн

Butter repair vehicle abnormal sound process- Good tools and machinery make work easy

0:37

Butter repair vehicle abnormal sound process- Good tools and machinery make work easy

Просмотров 9 млн

ПОЛНЫЙ РАЗБОР Chery, Exeed, Omoda и Jaecoo ПО ТЕХНИКЕ 🐉

1:13:26

ПОЛНЫЙ РАЗБОР Chery, Exeed, Omoda и Jaecoo ПО ТЕХНИКЕ 🐉

Просмотров 584 тыс.

Выбираем тачку? #шортс #топ #марьяна

0:17

Выбираем тачку? #шортс #топ #марьяна

Просмотров 827 тыс.