Ford Transit Custom - Non Start - No Communications - Can Bus Diagnosis

Подписаться 22 тыс.

Просмотров 41 тыс.

50% 1

2017 Ford Transit Custom 2.0 Ecoblue with a non start ,no dash display and no
communication with any Diag machine, using a logical process to locate and repair the non start fault - www.amazon.co....
#transit #canbus #nonstart
Forscan ELM327 Lead - amzn.to/30ZmaJN
Resistance Decade Box - amzn.to/3ihl81Y
K-Type Dgital Thermometer - amzn.to/2AmeHd4
Parasitic Drain Tester - amzn.to/3dRqLkx
Mityvac Vac/pressure handheld tester - amzn.to/385MSlG
Multimeter - amzn.to/2XCFnOr
Relay Breakout Leads - amzn.to/36nzCIg
Relay Tester - amzn.to/2WZkkXc
Autool Battery Tester - amzn.to/2A3fIGi
Airbag Bypass Tool - amzn.to/2A6Nyug
Trim Removal Wedges - amzn.to/2LRfPr1
Ford Fuel Pipe Disconnection Tool - amzn.to/2ysQjpb
OTC Test Light - amzn.to/2WUaKVo
Please subscribe to my channel and hit the notification bell for updates.
=============================================
/ carlton8571
=============================================
Facebook: / skodayoda
=============================================
eMail - sydiagnostics2019@gmail.com
=============================================
If any one of my videos has helped you out in any way, then please consider donating to support this channel to keep making and improving the content.
===============================
www.paypal.me/...
===============================
======================================================
~-~~-~~~-~~-~
Please watch: "Ford Focus Mk4 - Malfunction Warnings & Can Bus Errors"
• Ford Focus Mk4 - Malfu...
~-~~-~~~-~~-~

Опубликовано:

7 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 162

@robertback3048 2 года назад

EXCELLENT work, this sort of diligence would make an owner of a vehicle with problems transport it to a good garage and even wait if that garage is busy knowing its in good hands 🙌

@Nelson1234 4 года назад

Nice fix. Man you have patience a lot of garages would have walked away. Well done .

@SYDiagnostics 4 года назад

Thanks, correct wiring diagram helped fix this one

@brendanwills702 4 года назад

Great find hope you were rewarded well ££££... . Dealer would have chucked all sorts of parts at this fault.

@SYDiagnostics 4 года назад

Errmm, I'm a dealer tech ..lol Unfortunately the customer will feel it shouldn't have failed and that I'm expected to fix it. So it's just another job, onto the next when it comes in.

@mikeberry304 3 года назад

That's one of those pain in the arse jobs , where you wake up in the night at home thinking I know what's wrong , I am going into work now , when the wife says it 3am , go tomorrow, dedication on that job , no towel thrown in , good job done 👍👍

@SYDiagnostics 3 года назад

i've got one of those type of jobs on the go currently...lol

@kennedysgarage3281 2 года назад

I have commented on this video before but when it popped up I just had to watch it again. And I’m still amazed at how you found that Steve, brilliant work & commitment coming in on your own time to resolve this issue 👏👏👏👍

@mdsymonds75 4 года назад

It's about time manufacturer's started to protect those wiring harnesses more.

@carstengotfredsen160 3 года назад

Hi there. Thanks to you, my daughter, who is brand new, found this subject. She works at a dealership Ford Copenhagen. The error was found after one day's work, the next day, after 10 minutes, the error was found, thanks to you.

@SYDiagnostics 3 года назад

wow thats awesome!!! thanks

@craigdixon02 Год назад

Wow true professional at work ! Whish I had your expertise in my one man garage, just don't have the time or knowledge well done and patience paid off

@grumpysi6704 4 года назад

Brilliant find..thats cars for you bang the a post and the faults at the other end of the van

@u.h.johansen803 4 года назад

Great content! Thanks for showing your thoughts on which ”route” to go during the diagnosis. Please keep doing that.

@parna121 4 года назад

Well done Steve. I would have put stupid hours into that fault.. before it would have been found.. just shows the importance of having access to manufacture information. Again well done and a great video well put together..

@Diagnosedan 4 года назад

That's an awsome find! Great Job!

@SYDiagnostics 4 года назад

Thanks Dan, always a pleasure to have you drop by

@soranghafour 4 года назад

Great detective diag process , thanks for sharing it

@powayimports4175 4 года назад

Honestly great job. I would have had a tough time going farther back after the A pillar cover changed the signal.

@shorterdanny 3 года назад

Ninja level skills

@Russell_Duncan 4 года назад

You must have the patience of a saint Steve. Could it have been the shock loading of when that Pterodactyl shat on the bonnet that moved the wiring harness 😜😂😂

@SYDiagnostics 4 года назад

Yes it was a hefty deposit.......We had an apprentice once, but we sent him to the shop, heard a commotion with birds and never saw him again?

@Russell_Duncan 4 года назад

SY Diagnostics 😂😂😂

@electrolineservicegreece8267 4 года назад

Oo ... very nice diagnostic. That would be a very hard find, at least for me !!! Thanks for sharing, and thanks for teaching us the correct diagnostic steps

@kennedysgarage3281 4 года назад

Excellent work, it all takes time & it’s easy get lost in the complexities of it all. But well done on that find 👍

@IAMNOSLEEP 4 года назад

Very difficult diag. Awesome diagnostics. Cheers.

@aaautotec5002 4 года назад

Brilliant video and diag. Thanks very much.

@martinthorz2983 4 года назад

Great work, well impressed :) the whole story shows that great technology still needs the support of common sense. Rubber grommet (5p worth);on the hole where the harness passes through the strut or more resilient sleeve on the loom added by Ford designer at the drawing desk would probably save more than few break downs. Great investigative work, very educating. I just wonder what is going to happen to the world when our generation of people who are used to putting effort and passion into whatever they do dies out ;), well done, mate!!!

@johnboon9676 4 года назад

nice 1 SY , That was boss , can't help thinking the customer maybe a little suspicious when charged for a 5 hour diag . thanks john

@SYDiagnostics 4 года назад

because the fix wasnt a 20 min fix like the video was. There was time to strip items and test items plus open time to view diagrams etc....the job was warranty so customer isnt paying

@andrewk778 4 года назад

A GREAT diagnostic video. And a nice production effort with the video. Thank you for sharing.

@Tubecraft1 9 месяцев назад

Great tip on the use of the bob

@paulstanton1813 4 года назад

Fantastic diagnostic strategy Steve. Looking forward to the next case 👍

@paulelscey2465 4 года назад

Great find .I work as a ford technician. And on these things all day I be looking out for that if I get the same problems. Ford has really gone down the pan there wiring looms are terrible .

@b19bmf Год назад

Brilliant, well done!!

@lawsonthursfield6950 4 года назад

Awesome diagnostic process really was a needle in haystack. Many thanks for sharing your talents, always enjoy your videos. Keep them coming Steve 👍

@SYDiagnostics 4 года назад

Thanks Lawson

@stephenkelly5642 2 года назад

Brilliant detective work

@elitefleet6402 3 года назад

great vid loved it i have a 15plate with the same fault on the parking sensor. i connected my cheap computer to it and its coming up as rear sounder?

@AbbottAutomotive 4 года назад

Great diagnostic process and great diagnosis! Keep them coming 👍🏻 There's one thing I can't understand though, and that's why you don't have at least 500,000 subscribers with your content.

@SYDiagnostics 4 года назад

50,000 would be nice, i don't know about 500k lol

@Tubecraft1 9 месяцев назад

Thanks for showing a true process and all the dead ends it lead you merry dance but you were determined to beat it Well done! Ive got one right now that is saying “immobilser active see hand book” and on live data the key is “not present “ 2014 model also a dtc “battery relay B closed” and another “battery relay B open” lots of green verdigree on the pins in the bcm that go to the key reader but the cables appear to be good - no resistance. So ive popped open the BCM and someone has already carried out repairs to the board and it has been ok for about a year under the present owner but I wonder if some of the fuse pins are “dry”

@andrewfoster1316 Год назад

now is it me that most of your videos are of ford newish models do you deal with other makes of cars or just ford at your place. great videos people need to watch

@SYDiagnostics Год назад

I worked in a Ford dealer. I've since left and work at a place strict on phone/camera use, so for the moment the videos won't be forthcoming

@marksquire232 3 года назад

i have a similar issue with my 2.2 eu5 intermitant dash warning lights there for a while the gone again and then back over a few days then maybe good for a week, dash ok and vehicle runs ok

@trackpig 4 года назад

I had very similar symptoms with my custom. A YT vid pointed me to the 3 earth connections which bolt to the body underneath the left head light. The earth's can have poor continuity. Cleaning, lubing and reconnecting the earth's can help. Nice work on your senario though!

@stevenmarsh7138 4 года назад

great case study. thanks

@PineHollowAutoDiagnostics 4 года назад

Cool! That was a needle in a haystack, Steve!

@SYDiagnostics 4 года назад

Thanks Ivan, it's great to have you here

@steveguest8028 4 года назад

That’s a great find and a real head scratcher ...thanks for sharing 👍

@simonrawle7885 4 года назад

very impressive find Steve

@TheMopar59 4 года назад

Wow, what a great vid :-) Loved the explanation on gateway.

@iankelly2110 4 года назад

Top drawer diagnosis

@d.d4184 4 года назад

What a ffing nightmare. Excellent find.

@dennischin3053 4 года назад

Amazing, this is the complete diagnosis

@Elconbrioso 3 года назад

Good Friday night, and I've just gobbled down a decent portion of coronation chicken, complete with Pitta bread . Got to wait a while for afters . Whilst waiting, I've decided to log onto SY Diagnostics for a masterclass . SY diagnostics - bring on the Geek talk . Pud was ready half way through and so I didn't to the end, but I caught something about a spilt fizzy drink on the dash, and I am surmising that the Phosphoric acid (or what ever ) in the drink was to blame for the problem. There's no telling what havoc could have been wreaked with a can of Iron Bru ! As the motor car has greatly increased in complexity - so to, the ingenuity required to get to the bottom of faults and breakdowns.

@SYDiagnostics 3 года назад

😂 I'm afraid it wasn't the fizzy drink.... Nor was it Mrs White with the candlestick in the library

@Elconbrioso 3 года назад

@@SYDiagnostics I jumped the gun , got ahead of myself - trying to be smart . I will log onto the second half, tomorrow - when the effects of the Coronation chicken and the Rioja have subsided

@lane1962 4 года назад

Brilliant work, Great job, thanks for sharing your skills.

@DylanRabier 4 года назад

Great diag Steve. Very interesting. Thanks for sharing! 👍

@cdmChase1 3 года назад

Great Job man!!! I can learn alot from this guy.. Thank you!!

@jhackme 4 года назад

Excellent work my friend; As my GRAND mother told me as a child; as she watched me building model cars you have patience of a SAINT which has carried on to my adult life.and so do you my friend. Iam a 32 yr master Tec.. I felt your pain for a while but as I said a great job >aka cousin Vinny >IE jhackme

@SYDiagnostics 4 года назад

Thank you for your comment, its always nice to read comments from fellow techs who appreciate what goes into diagnosing and fixing modern vehicles

@chrismangan3250 4 года назад

Usual top work , clear concise and to the point. Thanks for sharing Sir👍

@SYDiagnostics 4 года назад

Thanks 👍

@bertfairbrother7745 4 года назад

Hi, great information & skill. My van (2019 transit custom limited 300 L2 12K on the clock) has been in ford dealership now 7 weeks. Last Ford im buying!

@SYDiagnostics 4 года назад

What is the issue with your custom?

@bertfairbrother7745 4 года назад

@@SYDiagnostics Hi sorry for not replying sooner. I filled up at the garage, went & paid, came back and no dash lights, or warning lights ..would not start, not even a 'click ' nothing only a blank dash. Got lights & the remote door locks worked.( i have had a full set of door locks & door protection plates fitted, but its been fine & that was 3 weeks before the fault occurred . both Green flag & AA(ford assist) said get it to a ford dealer asap. The fault is intermittent though. I got it back yesterday after 7 weeks and told the plug in found no faults, addBlue says half full. So, i just have to 'keep an eye on it'. Here's hoping it's just sorted its self out. Thank you for checking on my situation. Keep up the great videos & edcatuting us. 5*

@SYDiagnostics 4 года назад

@@bertfairbrother7745 could be water in the bcm its common unfortunately

@bertfairbrother7745 4 года назад

@@SYDiagnostics Thanks, i will keep that one in mind if it happens again. keep you posted too. Many many thanks.

@davidpaterson6318 4 года назад

Excellent job!

@sandyande 4 года назад

Cheers Steve great content many thanks Sandy

@SYDiagnostics 4 года назад

Thanks Sandy, I need to catch up on yours as i've seen you have a few new videos

@ashrafabdulla7404 3 года назад

Good find we done

@va7052 4 года назад

Good diagnostic there.Found you thru Luis from LM repairs.Keep up you make a good job.

@SYDiagnostics 4 года назад

Many thanks for the comment, has Luis mentioned me? If so I must thank him...

@definitivediagnosis9162 4 года назад

Great video Steve. Awesome find and a very well put together video.

@SYDiagnostics 4 года назад

Thanks Glenn, I didnt know how it would work out as a lot of the time i couldn't capture the issues on video plus iv'e been on/off it for 2 weeks

@SuperMarioDiagnostics 4 года назад

Great video! Thanks for sharing 👍

@SYDiagnostics 4 года назад

Cheers Mario, nice to see you here

@leeperry1525 8 месяцев назад

I have a problem with my 2.2 2014 custom. Sometimes starts, sometimes doesn't give me ignition lights, sometimes the clocks don't even light up on door opening. Radio/interior lights/hazards etc always work. Very intermittent. Worried it could be bcm but think it's more likely to be a short somewhere like in video. Good job, wish me luck 😮

@chelseajohnson8226 4 года назад

Now I'm clear about gateway

@georgeson6394 4 года назад

Simply superb, such a nice work

@martinguitarhd28 4 года назад

Steve you are a top tech nice find.thanks

@SYDiagnostics 4 года назад

Thanks for your comments and thanks for following my channel

@alwishy2696 4 года назад

Cracking skills buddy

@congrelmunt8769 4 года назад

Great stuff as always. Please keep em coming

@anthonytaylor7570 Год назад

Fantastic job 👍

@billgoldberg5666 4 года назад

How detailed diagnosis..!

@user-ky7ty3ie1x 9 месяцев назад

Professional job

@sitdox 2 года назад

Great work as always

@nickcanfield 4 года назад

Outstanding work

@tam1381 4 года назад

Great find...

@luckysmiler 4 года назад

Bloody hell ,this is the 3rd video ive watched in a row very good

@wardybasher 4 года назад

Bloody good fix that... 👍

@carljohnson364 4 года назад

Wow! I was waiting for that episode the whole week! Finding a short on the other end of a car is a true ace task! Just wanted to ask you What is your OBD Breakout box brand? I'm looking at buying one right now.

@SYDiagnostics 4 года назад

its blue point. i believe they have a new version out now. thanks for the comments

@fariedajamdien1840 Год назад

thanks that was a great vid. i have some what the same problem. when i put my foot on the brakes the dash goes off ,yet all the functions works ,nd i get a park aid warning nd the canbus also shows up on testing. seems like the same problem as yours. the dash goes of nd a minute or 3 it comes back on. only when i brake .

@benjaminlevi7792 4 года назад

Good job

@mechtechmechanical1571 4 года назад

great vid ,really interesting

@guayaco-dm3vu 4 года назад

Excellent Diag Yoda.. I was wondering how did you manage to get the reading of the gateway and you mention you backprobe. Can you please do a tutorial on how to do the harness you mention. As you know Ford wants wants too much money for the gateway breakout box and was also thinking of how to rig the regular breakout box to check the other data lines but you already did it :).....

@SYDiagnostics 4 года назад

the genuine Ford item is $449 plus tax !!!! i reckon i could knock these out for £100

@guayaco-dm3vu 4 года назад

@@SYDiagnostics yea you not kidding. I can buy it for 300 on sale here from rotunda so im thinking about it or build it just like you did.

@shaneleigh1751 3 года назад

My Transit Custom (SF18 RVT) has a very similar fault type, my ford dealer has been trying to diagnose for a week.

@fariedajamdien1840 Год назад

mine as well. park aid on the dash shows faulty nd when i apply brakes when driving, my dash goes off nd 2 to 3 minutes late back on until i brake again. seems like the same problem like he had

@benp8310 2 года назад

Great video, where would that gateway plug be located on U.S. model t350 pass…

@SYDiagnostics 2 года назад

If it has one, im not familiar with US vehicles. As a rule it'd be connected to the diagnostic connector as one unit. But some vehicles I've seen, the gateway module is remote (mustang)

@stmp2757 3 года назад

Another great video 👍

@lilygarnett2018 4 года назад

I never think that you guys done the 100% work

@SYDiagnostics 4 года назад

I don't understand your comment?

@fatheadchrisn Год назад

Well found, great video. When you were looking at the CANs with the scope, had you the gateway disconnected so you could put the pins into the plug direct?

@SYDiagnostics Год назад

I have made a break out box for the gateway unit. Alternatively you can back probe thd connector. Some networks can be accessed via the obd plug

@fatheadchrisn Год назад

@@SYDiagnostics Thanks

@tradingwizard8057 4 года назад

you need a pay rise mate. most machanics would have give up long before. lol

@SYDiagnostics 4 года назад

The "book" stops with me, If I don't fix it then nobody else can where I am

@lewisthomas8260 4 года назад

Awesome video, just a quick question when the CAN failed did you check the signal at the OBD port and was it showing the same short? Just wondering if they are truly linked through the gateway As I was under the same understanding as you that testing at the obd is no longer possible as the gateway is it's own can network and is separate from the rest of the CAN, I work at a nissan dealership so maybe be slightly different I dont know but seems the same idea to stop people from messing with the network from the obd port

@SYDiagnostics 4 года назад

Hi, yes at all times i had the breakout box connected . The HS1 on 6&14 where not flashing, when I found the issue they started flashing. Testing 6&14 on VAG vehicles is only testing a diagnostic can. So these B.O.B are pretty much useless on VAG

@lewisthomas8260 4 года назад

@@SYDiagnostics thanks for your reply, very handy to know cheers for sharing the video love watching them keep em coming

@SYDiagnostics 4 года назад

@@lewisthomas8260 Thanks for the comments

@nickayivor8432 Год назад

👍 My Mentor SY DIAGNOSTICS QUICK-WITTED SY DIAGNOSTICS From Nick Ayivor from London England UK 🇬🇧 ⏰️ 16:28

@leso204 3 года назад

i'm not impressed with fords build quality, they were always known as Fix-Or-Repair-Daily in my day, but after viewing many of your vid's this cam bus system coupled with the poor multiplug design issues it's got worse to my mind, i got a 2014 connect LTD im trying to sort after it died with the no start issue i put it into a local auto electrics firm who said the BCM was screwed ( by the way they never got it running ) so dragged it back to mine and left it took battrey lead off as precaution , went back to it a fortnite later to see if i could find anything put lead back on throttle body started to wind up im thinking will this start now and it did i'm now doing a shearlock holmes on this now to track down the fault and where it could be , got a few ideas from watching your vid's and on it goes' cheers ............

@douglassaros6582 2 года назад

Excellent diagnostic testing procedure as well as repair on this transit! I do have one question for you though, how did you modify your DLC Breakout Box to accomodate the new gateway communication module connections? I would love to know that. Thank you very much.

@tdf3181 7 месяцев назад

Hi Steve im writing from italy and i bought a ford custom flooded,i've clean and lubed every connections,inside the van everything is working but not the instrument panel and tachograph and also not crancking like yours. 12v coming under those correctly and fuses are good,i was thinking if the obd module didn't work could i have these issues? How can i chec this? Thanks a lot for your help

@planet1250 4 года назад

You have done a wonderful job in creating this video man

@roullotsamuel Год назад

Tumbs up !

@Richard-ps7ht Месяц назад

Hi I have a mk8 transit custom. Fault code p1762 clutch pedal A clutch position correlation. Live data showing clutch pedal is partly pressed when it's not. I replaced both switches on the clutch pedal. It will only start by pressing the brake. Stop start cruse control tpms not working. Any information would be a great help.

@ashsmith6397 7 месяцев назад

Have you ever had the this fault on a ford transit custom 2014 .. ignition and dash works just won’t start . Changed starter motor, clutch pedal switch. Checked all fuses and fuses in battery compartment, cleaned earth points behind passenger headlight and still no joy have no errors in dash ? Am lost with it 😂

@SYDiagnostics 7 месяцев назад

multiple similar faults on transit (2.2 i presume), a hard one to help with without experiencing it. But have you got feed to the starter? the starter relay is controlled via the pcm, can be viewed on live data

@ashsmith6397 7 месяцев назад

Hi thanks for replying. Yes have power to the starter relay. Also have check the key ignition and that’s working fine also . I have been told the bcm is not communicating with the ecu ? Not sure what this means . But van was working fine went to it in the morning and have this problem 🤦

@jaxonjq 4 года назад

Great video, very interesting seeing your process for finding the fault. What is it with transit customs and their wiring? I have a 2 year old custom and its had new harnesses in both front doors due to broken wires and the drivers one has just gone again!

@SYDiagnostics 4 года назад

door harness seems to be a weak point

@levifearon3439 2 года назад

That is what my 57 Plate astra h Twintop Is do with the daash lights wiper ect Any chance you do mobile work?

@SYDiagnostics 2 года назад

No sorry....bad enough doing it 40hrs a week

@tonyrobson9290 2 года назад

Mine same fault. Found earth wires under fuse box to inner wing rotted off. Chuck's abs lights on and brake light and engine manage light on and no Speedo before packs up. Re routed both earth wires and solved it. No testing gear apart from code reader. No connection to vehicle. Might help