It's a while since I did that, I have the manual on my RU-vid if you want to look at it follow this link. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-u5YkRfygrS8.html&ab_channel=MarshallSmart. Or if you go to my Flicker where you can down load each page. www.flickr.com/photos/dino60/51365754257/in/album-72157719709246005/ Still have the 4 new single O'Ring liners as I thought it was a 1955 block. Should have checked casting No . M 😀
You can get them from Agriline or old 20 parts co. Count the seals with liner out. 1953-58 single seal 58 on twin seal. My tractor had a service block fitted so the parts were 55 but the liners were for 63. Have a set of 55liners single seal left over M
Agriline supplied the kit. Only issue was the bairings some were scratched. Just bought an other set. Had wrong liners as block was changed 1963 block. M
Hi Marshall, I bought a Super Major with a seized block due to the oil pickup blocked. It looks like the block has been damaged on the lower end. Do you know where I can get the specifications of the block so I can possibly have it machined?
I would try Bundy Bare at www.Queenslandtractors.au he’s worked on a lot of tractors and has a machine shop. You can download the manual from there also Marshall
This company post abroad this is where i got most of my parts for major. agrilineproducts.com/ford-fordson/fordsonn. Or Mayhill have some parts Agrilline don't www.mayhilltractors.com/fordson. good luck M :-)
Não tenho certeza do que você está perguntando. Ele se traduz para o inglês como o número de motor. Você quer dizer o número do cilindro ou o número do motor? Marshall
