Forget the Baking Soda! The Most Effective and Robust Adhesive I Have Ever Seen 

That is so good to hear I am please, I have a couple things made of plastic that's snapped up a couple of pieces of equipment I assume that was totally out of luck. I just bought some super glue and I'm filing down some graphite right now I'll tell you how it works out

@@annarock8966 oh my.... i assume it'd probably perform better w/o any adulterations, what is your souce plz?

fixed my headphones this way 150 dollar headphones i use at home alone my kiddo kicked them off my head and i really dont want to pay for new ones when they technically sork just fine still so i filled in the voids and built it up around the two pieces and then electrical tape over the top as a way to cinch it together since its elastic tightening ability for a tape is really good

Eu também gostei. Espetacular

Maybe if you weren't so Rough on your shit it might last longer . . . 😂 (that's a joke)

Muchas gracias por su información, pués la misma le falta al vídeo

Me olvidé de saludarle desde España (Andalucía) 🇪🇸🇪🇸🇪🇸🇪🇸

We engineers only used the H grade - hard - for our drawings. Of course that was in the times long before computers. We depended on T - Squares and triangular rulers. 😉😉😉😉

And carcinogenic because it's full of asbestos. Only a fool would risk using it powdered.

A 3D printer using CA, graphite, baking soda, etc., instead of plastic floss, could make parts that are ready to use/on demand, rather than printing plastic models that need to then be remade with more durable materials. That'd be cool...

exothermic reaction. don't burn your finger

Super handy

@@yatatana8552 I have burned my fingers eight times and can attest to the incredible heat produced by this reaction.

I REALLY don't recommend using ANY kind of superglue composite for "insulation in soldering irons" or other "refractory" uses. Cyanoacrylate fumes are outright nasty and no amount of reinforcement is gonna prevent that, not even volcanic ash.

@@CoolKoon thank you for this important safety tip that I wish I could up-vote to the top of the comments. Not my place to re-post, as it is your knowledge providing this cautionary wisdom. Glad I read far enough to learn this from you and would only want the same from the rest of our people here.

just popping out to vesuvius right now

Where do I get volcanic ash?

ei cara! vc que de certo é brasileiro me explique o que vc entendeu do experimento... grafite ralado mais um pó branco não mostrado a etiqueta !? e depois um liquido pingado e ficou duro... sem legenda e sem som... parece fakenews... pegadinha... o pó branco pode muito bem ser algo já pronto pra esta finalidade se adicionado as gotas secantes tb já feitas pra isto talves pra funilaria de carros e o cara pois o grafite de lapis na historia só pra enfeitar o pavão! ?

@@apreciadorinstrumental8990 Ola brother, esse tipo de video é muito comum aqui no RU-vid, a novidade para mim foi o uso do grafite, o pó branco que voce tem duvida é BICARBONATO DE SÓDIO e o liquido se trata de COLA INSTANTANEA (ou super cola). Pode fazer que realmente fica ótimo.

Да тесты оставляют желать лучшего. Кликбейт. Кстати если проверите, дайте ссыль посмотреть.

Мне тоже скиньте ссыль)

@@user-cm2ny3bm4o пищевая сода

один хрень придумал а другие повторяют.лучше уж какой нибудь кирпичной пылью присыпать.

Ещё вместо соды можно попробовать Церезит (цемент), крахмал, также можно попробовать добавлять в смесь порошок алюминия или стали.

Белый смес что было?

You might be right 🤣👍🏻

I need to know what he mixed with the graphite too or video is useless. a lot of videos do this, or leave the ingredient up for a second instead of just leaving it there until the next ingredient. It's so aggravating, I unsubscribed from a bunch of repair, cooking and craft videos. The only reasons I can think of why he used a pencil, it was an emergency repair and store was closed, or they live in a poor country where they can barely afford food so can't buy graphite powder. The way America is going, that will be us soon too.

He mixed baking soda with the graphite

Tal cual, le diste a la justa, 3:20 perdido al divino botón

@@captainamazing1356 Not quite, baking soda is sodium bicarbonate, he was using calcium carbonate. Similar compounds though and serving the same chemical purpose.

JustCurious, don't suck, if you didn't realize what the graphite was mixed with then you should change nick because you have nothing curious about it.😬😬😬

You mean to use the black powder that forms on the spoon when you hold it over a flame? I've seen a video where a guy used ash, cigarette ash to be exact, and it works.

co to prosím používá za lepiudlo?

Ju lutem shumë komentet mi dërgoni në gjuhën shqipe se vetëm këtë gjuhë di unë,respekte.

УМНИЧКА!☝️😉💯💯💯

True. This is a biased video that is fake news.

putting the video at a speed of 0.25 you can see that the stick is turning in the direction of taking the waste to the top of the tool, so it seems that the direction of rotation was correct in the graphite. I suspect that fraffite, because it has carbon, facilitates covalent chemical bonds and would be stronger because of the bonding chemistry and not because of the hardness of the graphite powder. Someone gave a tip about crushing fiberglass wool and it could be that I got a lot stronger even if I mixed it because the glass powder is very hard

you saved me time, am about to say same thing , thank u . the most stupid person who think he is the smartest.

Well given a timelapse with framerate, the drill bit may give the illusion on directional change. (But yea, he may have ran the drill backwards) I wouldn't know, haven't tested them yet. I look forward to it . .

What will u be use liquid with the graphite powder. Name please

@@venkateshiyer4372 repairs on bad plastic and metal on car thank you smart man

I respecfully disagree -pease watch entire video, there is a super glue graphite hack video where are he made a wrench and tightened a loose bolt‐ Amazing

@@thhomasmarks The result isn’t magnetic. Dependent on the % graphite content, the result will be conductive to a varying degree. The conductivity of graphite in epoxy, rather than with cyanoacrylate, is a property that is exploited for some uses.

Laser printer toner worth more than gold

What are your results, have you tried it??

@@bettyswallocks6411

Amazing, I did exactly the same in the summer of 2021. 😆👍 I know the trick w/baking soda as I like to model airplanes, it is good for filling gaps or used as putty.

Is it the graphite or is it the clay from the pencil what makes the mixture hard?

В былые годы, в СССР, самый мягкий "простой" карандаш, обозначался М - 2М

I thought the HB was the softest one.

@@user-yf5pb1my7c можете объяснить чё он смешал с графитом? Соду?

no explica que componentes usa además del grafito ke es evidente

No.

@@user-jc9ke1ru3h why

I used lubricating grahite powder & it's worked fine.

Попробуй с алюминиевой пудрой

А что за клей использовал..?

@@vijakleina3379 обычный супер клей

Hace algún tiempo reparé un buje de goma de una turbina de aire acondicionado. Esa reparación la hice pega loca y bicarbonato, quedó perfecta y dura. Después de seis meses de uso se dañó, verifico la pega y está como granito de azúcar,toda desmoronada. En fin. No soporto las bajas temperaturas o los cambios bruscos de temperatura.... Terminé reparando el buje con Silicon automotriz de alta temperatura. .

Че там пробовать, разве не видите что все его якобы испытания это лажа на ровном месте. Ну а про наполнитель всегда раствору добавляет новые свойства.

Согласен, выводы автора ролика, сомнительны.

И ещё, графит токопроводный и использовать такой клей нужно осторожно, с точки зрения, электробезопасности.

@@user-sb8fx2bu7q ну, это стоит учитывать лишь в конструкциях, имеющих электронику в месте склеивания. Хотя сопротивление подобной склейки может быть весьма разным, возможно из-за клея сам композит вообще не будет токопроводящим.

@@user-sb8fx2bu7q А тонер от картриджей подойдёт?