Forstner bit/ Hand-plane holder, VFD and more (Random Shop Stuff 17) 

Hi Marius, It been five years now I have been watching your videos and I can say that I have not missed one and they are away very good to watch .Your are a great videographer and a very imaginative engineer . Some of your projects have been implemented into my work shop . You are an extremely interesting person .I like your humor as well I always get a laugh from parts of your videos Thank you Sir

Just yesterday I thought, it has been awhile since Marius posted a video. Glad to see you back. I love your creativity and ingenuity.

Having a dedicated circuitbreaker for just the lathe (or other large equipment) is very good. In the (however unlikely you think it is) event something goes wrong with the lathe and the breaker trips, you won't also be in the dark suddenly with a metal object that hasn't stopped spinning yet. As for the VFD, I'd put it on the bandsaw. Both to prevent the blade and/or belt from slipping on the wheels and/or pulleys, aswell as being able to control the speed.

Ich denke, dass du aus dem Bundesstaat Missouri in den USA die besten Videos für Holzbearbeitung auf RU-vid hast. Mach weiter so. Wir freuen uns darauf, Ihre Videos für eine lange Zeit zu sehen.

Lovely chip displacement on those new forstner bits. The displacement is why they take less effort to use. The payoff is the mess.

I did try some very high quality Forstner bits last year. The holes were so clean cut and smooth, it shocked me. That plane was delightful. Good tools are a joy, every time you pick them up.

Those clips are the most useful things I’ve ever seen 3D printed. (That may be an exaggeration, but you get the point)

I've been using that VFD for the CNC machine / controller I built. The manual was a bit confusing but I managed to programme it to toggle between PWM input and the potentiometer to control speed. I like how futuristic it sounds.

I have a California Air Tools compressor, which seems to be the primary USA based distributor that uses those motor/pumps. It's so lovely to have something that's so much quieter than a traditional one, and still can have decent air flow.

Lie Nielsen is the bee's knee -- I have their box plane and it's just a pleasure to use.

Wow, what a diffrence a bit makes

I put a VFD on my Clausing floor standing drill press, which already had a mechanical variable speed drive, and I really like it. It's great for when I use large bits in metal or hole saws because I can turn the speed way down and still get adequate torque. I no longer fear the bit grabbing hold of my work at high revs and flinging it across the room or at me. Putting it on the bandsaw may allow you to cut metal since you want a much lower blade speed for metal cutting.

Very nice Forstner Bits, a little pricey but as my Dad use to say you get what you pay for. What I say is " Buy right cry once " ! Nice video, will look for the next one :-)

I wouldn't mind seeing that gift truck make a stop at my residents ! Marius it's a wonderful thing that someone is moved watching your video's and the projects to send you such a great plane. Be sure and show us what you come up with to do your sharpening station. That would be an interesting video.

Hi Marius. Advance the inverter speed slowly and jot down the frequencies where the inverter is loudest. The manual should have a section called "Skip Frequencies". There should be several registers where you can program the inverter to skip over the most annoying frequencies. You can put a bi-metal blade on the bandsaw and slow the blade down to cut metal.

The sound of that VFD is so recognisable... At my job we use a couple of those to regulate the rpm on 5kw motors driving blades in large 5000 liter mixing tanks, with high viscousity fluids. Especially in winter, they really scream at low frequencies :)

For the VFD noise, you could make a small box, with a speaker, microphone, amp, and some circuitry that would allow you to put the sound directly out of phase. This would cancel the sound.

Thank you for showing that 3D printers can be realy useful and not just for printing stupid figures and toys.

Hello Marius from New Hampshire, US. Great videos. Excellent skill. RU-vid breaks country barriers. GREAT work. Ausgezeichnet!

Fequency drive for the bandsaw. Beter for metals. Keep the vids up! You’re the one of the best sharing with Mathias Wandel, Ave and Diresta. You have lots of inspiering video’s to me. Keep the vids up! And i get it. Running a hobby/semi-prof shop and studing the same time is difficult.

VFD on Dust Collection thought: Instead of wiring to each blast gate, you could use a pressure sensor in the system next to the collection unit and some sort of simple monitor (like an arduino) that would then regulate the system pressure by increasing or decreasing the motor RPM. That way whenever you open or close a blast gate, the system would adjust accordingly. Not sure if the VFD you have would accept an external input like that, but would be a cool project if it did.

the full vfd noise got my cats' attentions! Definitely put the VFD on the band saw. That is one thing you could best use variable speed on, and the soft start would help that belt shock when starting.

Your videos are great I specially like how very straightforward they are ! Thanks for posting them ! Have a wonderful day !

I have been considering all the pro/cons for the question over these past 6 years and I think you should do the bandsaw. I will be patiently waiting to see the results.

You don't need new blast gates if you were to put the VFD on the dust collector. Just add one magnetic reed switch on all of them, the same type of switch you find on a wired alarm system. Magnet on the sliding portion of the blast gate and the magnetic reed switch on the stationary side. Look at ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-OSoZJ3criGE.html to see how he have done it. Also another note on the VFD, use a shielded cable between the VFD and the motor, else you can get interference in your electrical system, which really isn't good. Still, really nice to see that you are active again, and I hope that we don't have to wait so long for the next video!!

Now that you have the cheap and the good ones, you could look at some differences and if its possible to modify the cheap ones to be more like the good ones, so people could upgrade their cheap stuff themselves...

Was there a reason not just to drill the holes bigger?

The VFD noise made my dog JUMP! He needed the exercise anyway.

Happy to see you back. Love your creativity and simplicity of solving unexpected problems. Hope Engineering School is going well.

Good to see you back 👍🏻

WARNING- Don't use compressed air near a lathe!!!! One of the first rules of machining. Use a brush, it will prevent chips from getting inside the lathe.

I vote for using the VFD to upgrade the metal lathe to a 3 phase AC motor with proper speed control. The dc motor solution normally installed in these types of lathes, are a bit low on torque at low RPM. You will enjoy the upgrade if you are doing any screw cutting in the future.

You might want to set up some air-reservoirs close to each use area. Those air-lines will give quite a bit of air resistance.

Merry Christmas !

Bandsaw makes more sense than extraction really. Although it could be cool to see you do the wiring and stuff on the extraction.

I think the dust collector would be a better choice for the VFD. If you don't know about it, look up "87Hz", you could get a lot more power out of the dust collector for free by running it faster.

Great Work, the 3d saves your life.

Hey Marius, schön mal wieder ein Video von Dir zu sehen :) Mit dem Kompressor hast Du für den Preis ja einen echt guten Fang gemacht. LG Johannes

So gut dass du wieder da bist - ich habe deine Videos vermisst. Du hast wahrscheinlich mit deine Schul Arbeiten viel zu tun. Aber deine Videos sind immer eine Große Vergnügen von sehr hoher Qualität. Danke vielmahls.!.!.!

Famag forever, drillbits also the very best you can get

the only tool i could imagine a variable speed would be particularly useful would be for a moulder, which you could make... which i would enjoy watching...

I would use the VFD on the bandsaw, it should be a quick easy install and you will be able to use it right away. You can always move the VFD to the dust collector later on, it shouldn't be too hard to restore the bandsaw back to how it is now. If you put the VFD on the dust collector, you have to install all the wiring and switches before you can get to use it, and if you decide afterwards to move the VFD to the bandsaw you will be left with wiring to your blastgates which is no longer needed. I would go with the bandsaw.

Very convenient!

Very interesting! And yes, it's loud. Thanks for the warning.

i would say use the VFD for your laymachine or drillpers, somethimes it is more handy. You can than run for some application very slowly.

OK BACK AT IT GREAT.

Yeah new video from marius!😁😁

The effort adding a microswitch on blast gate and some relay logic. I would recommend you a star/delta starter for bandsaw.(You don't have to buy it,just buy two contactors and timer relay)The relays would probably solve logic for the collector (big machine switches hi fr./delta and small lo fr./star)

Bandsaw for VFD to allow slow speed operation for metal cutting. It then adds real functionality rather than just adding niceities.

You could use the VFD to have the CNC router speed managed by Grbl/G-code and also have it run slower than it can do by itself.

Die guten Famag Forstnerbohrer, da hast du dir was gutes gegönnt!

I think it would be cool to have the VFD on the dust collector. Great video

I came from Zack of all trades channel now i am a subscriber here as well. Thank you for the video's

Nice stuff, this looks better and better all the time!

@14:15: Klemmschellen gibts in allen Größen, und die Halte-Nasen schauen kompatibel aus.

use the VFD with the band saw to lower its speed and cut metal with it or do the same with the table saw to also cut metal with it(more dangerous)

Use vfd for the dust collection much more usefull than on the bandsaw!

I'd say putting the VFD on your dust collector system makes much more sense, since that is a very beefy motor to start up and requires a whole lot of current the traditional way. Also, you can adjust the speed to the point you impeller runs most efficient, if needed. I don't see a sense in putting it on the Bandsaw, since you will always work with the same speed just like the table saw. ps. I just finished putting a 4 kW Motor (3 phase 380 V) on my 20 inch Bandsaw (wandel design) and using a star-delta switch allows me to spin it up without noise or smoke from the v-belt. You might want to consider that option? You can find new ones for under 20 EUR on Ebay. Greetings

You made your choice, bandsaw

It's nice to see you upload again. Cool updates!

Un voto mas para la lijadora de banda. One more vote for the band sander.

real nice bits

Put the vfd on the lathe. It's the only device that you've listed that'd make a great use of the vfd

Ah right, I'm subbed to this channel. I forgot :D

Wish I had free tools, I would have a vunderbull shop, great job

You Sir are awesome. Greets from Finland!

Awesome set. I've been having an eye on those and would like to get the plug cutter set with it. Totally worth it!

Use it on "knifemakers" belt sander. Dont have belt sander? Build one! :D

Great so see you back at it again. What a beautiful plane! thats a nice gift indeed. regarding the low noice compressor, guess I'm spoiled with an airbrush compressor at 30 db, but i cant compete with the volume of air of course... ;)

Hello Marius can I just say that based the videos of yours I have watched and that I all of them I feel I must say the you and your Chanel are surverley Under what you do is just amazing Kind regards Keiton from Australia 😃

I like it and look forward to seeing more.

I think you need the VFD on the bandsaw more, and it being the much easier project is another benifit :D

The bandsaw seems like it needs the VFD more. Also nice catch on the outtakes.

Der gute Wulf-Knapp Kompressor :)

those clips are brilliant!

Worth the money.

VFD are great with wood lathe.

You can make those gold bits cut if you sharpen them carefully with needle files!

Use it for all of them. Build a switch between VFD and tools

You should use it in dust collection and get all sci fi with it :p

Merry Christmas and Happy New Yeat..... thanks for all the great videos and interesting challenges you have presented...!!!

Rohrschellen gibt es in allen möglichen Größen, da war das Drucken teurer ;)

Glad to see another video from you man!

YASSSSSS MARIUS VIDEO!

Would be much better to use a soft starter instead of a vfd if you only intend to ramp up the speed of the band saw. Running a vfd for the dust collector on the other hand makes sense as you can control the speed depending on what tool you are running and how much vacuum power you need. More work, but a better use of a vfd

Love your stuff man. Always excited when you post new videos!

Ich glaube es wär am besten wenn du dir einen Band Schleifer bauen würdest und dann das verstellmudul zu benutzen

Would sharpening the old drillbits not also improve their quality?

Install on the dust collector it would be so much more convenient and really cool

Go the Aldi air line. Going by the colour and lack of cutting capacity I'm guessing the old Forstner Bits were Aldi as well? :) I bought some Aldi Spade Bits a while back. All of them were bent. Garbage! Although I have acquired quite a collection of their squeeze clamps, and the backpack vacuum cleaner I bought this week can pull aircraft out of the sky.

sehr schönes Set, einfach sauber und ohne viel Kraft bohren Gruß Felix

The VFD should go on your drill press. No more changing belts.

I've missed your videos. Always interesting to watch. Wish I had that lathe!

ich habe einen frequenzumformer an der bohrmaschine dran. links- rechts lauf, variable geschwindigkeit. allerdings musste ein 3 phasen motor her. ich denke hier macht das mehr sinn als an der bandsäge. eine motor hast ja noch über. vielleicht passt der ja. es sei denn deine maschine hat die features schon. ansonsten hätte ich wohl die absauganlage gewählt.

Nice to see you again! Thats a pity you make videos so rare!

I'd say use the vfd on some sort of a sander. Maybe make a new one that's 3 phase

Super Video!

you had me all the way up to calling the "conduit" tubes..............LOL

You could build a beltsander with the VFD.

Looks like you need to extend you dust collection system to your pillar drill.