FREE 330i TUNE FOR 328i/325i N52 COMPLETE WALKTHROUGH USING BIMMERLABS TUNE 

thank you this helped out alot!! It gave me confidence to do the flash. I'm on hour 2 of the new flashed BMW 128i and I'm super happy. Idle is little rough at start, but I'm expecting that to smooth out as the adaptations do their thing in the next few days.

super high watching this and all i can focus on is the noise your flip flops making lmao

Thank you so much for the tutorial. I followed this guide and heres what I have to say: I flashed this tune on a 2007 525xi and did NOT install a 3 stage intake manifold. Preliminary: Having a fast laptop REALLY helps. I did this on my laptop I use for engineering school and the RSA delete took only 4 mins instead of the expected 20-40mins i was seeing online. 1. Follow this tutorial video till after the RSA delete and tune is flashed 2. Cycle ignition on and off (i did 4 times) 3. Turn on the engine and idle till it gets to operating temp 4. Turn off engine and clear codes (Ista/Inpa/code reader/etc) 5. Turn on engine and let it idle for 2 mins 6. Turn off engine and reset adaptations (I used ista, but i think its possible to do this in inpa, i just know how) 7. Turn on engine and let it idle to operating temps, then take it for a spin (dont push the car too hard cause its still learning adaptations) Conclusion: I was very happy with the tune, definitely feels a lot faster but i cant confirm numerically cause i dont have access to a dyno. I will say that while it does not throw a check engine light on the dash, it does throw hidden codes that show up on ista. The 3 codes are: 1. DISA valve 2 isnt working 2. DISA valve 3 isnt working 3. The ECU code has been tampered with These make sense because i didnt install a 3 stage intake manifold so there are technically 2 DISA valves missing. The final code is a no brainer. I would suspect that this voids warranty so dont do this if you are under warranty. Other than that, the car runs fine and the lower power band feels great so its no longer sluggish at stop signs. Also earned yourself a sub :)

This worked flawlessly for me on a 2011 328i X-Drive. You should have no issues as long as you have the software installed and set up correctly. It certainly wakes the car up when combined with the 3-stage intake manifold.

Just did this on my 325i. It's a 2006, so I had to put the switch to the left. It worked flawlessly--can't tell the difference in speed so well because it's slipping in the rain, even in third! Throttle response is WAY better, too. Honestly, I'm stunned.

Thanks so much man! I had no problem reading through the instructions but I was still nervous lol. I’m glad you made this video, it made me feel way more confident about the whole process seeing it done so smoothly. I’m sending a couple $’s your way, first round is on me🍻

I tuned my E91today. I followed Alonzo's every step. Was flawless. Thanks! I'm surprised this doesnt have more views.

great great hint for testing the DISA valves before mounting. KUDOS

hey man just checked and they took it down, could you send me the download/ file to my computer

Thanks for the video. Going to do this today. 🙏

Thanks you soo much I needed this !!

does it still work in 2024?

Love this video! I just got a 3 stage intake manifold and I have bought everything needed and bimmergeek tools, but unfortunately bimmerlabs is down 😢 was looking for places online to download the software, was hoping you can send me a link or the zip files 🙏 I have 2008 BMW 328xi e92

bimmergeeks standard tools is down what should i do

Great video!

I have a N51 would this tune work on my BMW?

Thank you man! I have a question, can I make a backup for DME filles, if the RSA delete is going wrong ?

Nice video bro, you have got new subscription. Did you done dyno? To see the increase. What about fuel consumption , did it increased?

What should I do if I have paddle shifters? Three stage intake is already installed and it runs good. Just need to figure out how to tune it for the disas

Worked for me guys 🎉

What’s the affect of the tune on a e92 328i if I don’t have stage 3 intake manifold?

Hay, i found on my project just one folder msv70_rsadelete, is okey to install it on my e90 europe 325i n52 2005?. Its not gonna make some problems?

Would it be exactly the same for an X drive system

Are you sure the small. DISA valve is being operated after the 330i tune flash? Have you tested it? I am not sure it s going to work if the power class in the tune is 0.

Amazing video bro. I know it’s been a while but was hoping you would still reply. Will this work on an euro spec 325i with the N52B25 engine? It comes with a factory 3stage intake manifold. Did some research but I couldn’t really get a firm answer.

did you buy a bimmergeeks k+dcan cable or did you just buy one from amazon?

How much hp does the tune give it?

Does this work on auto trans with paddle shifters? Thanks

You forgot to mention whether this works only for N52B30 or also for N52B25

Hi mate. Is there a way to do a transmission tune this way

Mainly want to get a tune to get rid of secondary air pump junk for more room. Would this do it? Herd if I just remove it, I'll have a CEL.

Will this tune work on 328i 2008 coupe n51 with paddle shifters

there is an N51 specific RSA delete file on bimmer labs but there is not a 328 to 330 that appears when I look at available tunes. can I just use the N52 one instead?

Grat job Alonzo !! I want try it . But how i can find files to return at standar ? Do yo know ?

If you have a 328i n51 can you use this tune. It comes with three stage stock

I did it on my car following your intructions a 2008 328xi, now I'm getting the brake light abs and traction control lights on the dash I don't know what went wrong, did that happened to you ? Thanks for the DIU BTW

Hi bro, I have a 325i n52b25a I did an engine swap to the n52b30a and converted my car into a 330i, it gives me cylinder failure in the 4 5 6,, because I don't understand it, change coils, spark plugs, lambda, and it still fails, can you help me please, you are great a phenomenal video, I have a problem that I don't know how to remove "code 2FA4"

Hey man I had a question does it work on a 328xi cause my car has the n52 I just don’t know cause it’s all wheel drive

So what does this whole process do with your car? Does the program make it fly?

Can anyone help me. I’m trying to figure out what to do ecu/dme wise in my e46. My m54b25 blew up and I got a m54b30 to drop straight into it. I have had so many mixed responses. Please helpppp😅

I wonder why Bimmerlabs retired this option :/ I'm late to the party as I just got a 128i M sport. Oh well.. guess I'll just do the P.E. and intake.

Bimmergeeks no longer offers standard tools. Where else can dl it from?

Yo bro I just got a 328i I wanna learn how to tune it for burbles I don’t don’t anything was done to it stock intake

i have a question, do u think i will be able to do this on my stock e90 328i?

I may be a bit late to the party, but I also have 325i. I'm not sure but it seems 25is came with 3 stage mani as stock, right?

So this doesn’t work anymore does it ? I’m to late to the party I assume ?!

Will this work on my sons 2011 528i technically it’s my car but you catch my drift

n52 325i are in models. 2,5l and 3.0l. In which one stage 3 manifold works or just in both?

Hi Alonzo Can I do this on a F10 523i n52b25

Can I do this completely stock

Yall think this works on the Xi versions?

Why doesn’t it let me run Rsa file I did all the steps

Hey Alonzo are you able to do a remote tune to my car

Anyone have their factory radio functions all stop working after finishing flashing? All I can do is turn it on and off and that's it

thank you

Is it totally necesary to have the 3 stage manifold to do this in a 325i n52?

I have a question, in order to have WINKFP to work do I need the SP-Daten to be the one for my car or is that not necessary for this kind of mod?? or is the WINKKFP just the ap to install the 328I to 330I tune. I'm new to this that's why I'm asking

do you need the 3 stage intake for this or can I just tune it stock?

Does it works with n53?

Does this not work on Mac?

How much is the total cost?

Hey could I tune my e90 330i with this? Great video btw :)

Can someone send me the tune? They took it down sadly

What can we do since bimmergeeks is down?

Does anybody have their original 328i MT file ? Could be very usefull for me

i cant open the winKFP. It tells the path doesn’t exist?

is this flash only for auto cars or can it be applied to manuals as well? I have a 2011 323i manual (canada) and I'm looking to get more power out of my e90

Hello what type of laptop is needed for this

Please skkrrrr skkrrr responsibly

i love you

Hi, I have a question. So when I download the bimmergeeks standard tools, it only gives me one file and it doesn’t give me an option to unzip this file like yours did on this video. I know my computer should have an unzip feature bc when I download the rsa delete and 330i tune, it’ll let me unzip those files. Any ideas on what could have happened?

Good info but hook up the damn charger!! …Anywho

I have bmw 330xi 2006 . Do you think it's work ?

Is it the same process for a n51b30a engine but using the correct file? N51 engines are detuned n52s that have a bigger and more restrictive exhaust as a result of stricter emissions laws. so when BMW made the car they gave it a 3 stage intake and detuned it. anyone know? thanks for making the video!

Is there any tunes for the 330i itself??

This software is no longer available. Good Luck

Can someone ft me while I do my tune

Bruh… how tall are you lmao

Can you please send me the tune to my email please

Hey Alonzo, this is a great video and it helped me out a lot!! A few questions though: How do you know the tune was successfully programmed without any doubt? Is there a way to check? What codes popped up for you afterwards? Have you experienced any other issues possibly related to the tuning? I have an early model 3 stage intake with only one port for vent hose but my stock single stage has a 2 port, any experience or know of anyone who has still completed this type of swap?

Thanks for the video Alonzo, I want to flash a Z4 2008 3.0i to 3.0 si, I have an AT, do I need to do more steps or flash the transmission? thanks!

Amazing video , thanks a Lot . gonna do this in my 328i ive already instaul the 3 stage manifold & already fell bit o better more smooth running

Hello, I have a 325i E90 N52. So can i add this tune without the stage 3 manifold first? Do you notice the difference straight away?

I have N51 and a tune would gain me almost 40 hp and same with torque. Insane

Great job, but can i do it for E60 528i N52B30AE Black ? I saw bimmerlabs no Tune for my E60, just 2 Stock Tune Files, what happened if i download 328i to 330i, and flash into my E60, does make any problem or not ? Thank you

I have an N52. I have no clue how to tune it and I honestly don’t understand this video. Can someone simplify it please

I have a N51 would this tune work on my BMW?

windows 11? okay

Stumbled across this video glad I did. This works on E92 with N51 6spd?

I followed all the steps and it works perfect

Thank you so much Alonzo. SO just a few tips from hours of reading forums. Before doing any of this, make sure to drive the car around for 30 minutes to top off the battery. 1. you only need to copy the NCSEXPER, EDIABAS and EC-APPS over to you C: directory. Do not delete the old files stated in the instructions you will be missing some critical files. 2. Once the RSAdelete flash is done (20 min in my personal experience) ... really the most nerve wracking part of the whole thing... you can flash between 330, 330 mafless and stock files in under 2 minutes at will. So the RSA delete files only needs to be done once and that's it!!! 3. make sure you download the stock flash in the project tab. There will be 4 files, and you only need one of the .ODA files. -- uncollapse the details next to the tune and make sure you flash the corresponding .ODA file. It takes a bit of detective work but you will not need the .OPA file flash under the stock tunes. Worse case scenario, you can flash all 4 .ODA files, one at a time until the right one is installed. you'll know it's the wrong stock .ODA file flash if you get crank/no start. Thanks to Bimmerlabs for this amazing open source code. also relax and know that most everything is recoverable, and you can always pay someone to remote flash it for you if you mess up. unless you try to flash your trans.... trans flash faults can brick you trans unit. good luck everyone just go for it.

hey man i had a question im having alot of trouble with the bimmergeeks down load it seem like when i follow there insturctions i always end up with one of the progams not working its either inpa or wink fp when i open winkfp it tells me initialization error. i really dont know what is going on. i even try to watch videos and i follow step by step but mine doesnt work like theres. is there anyway that someone can shed some light on that i would really appriciate it thanks! i really want to do this cause i already have the 3sm i just have to do this

I have a N51 engine(comes with the 3 stage manifold) Can I do this same process to get more power out of it? I see the RSA delete and 3 tunes on bimmerlabs just don't know if it takes advantage of the 3 stage manifold.

Keith one time thurman I see where you been hiding 😁

Lewis, when did you leave Mercedes and move to BMW?

i did everything exactly as u said mine is {e90/325i/msv80/at} and didnt found rsa delete or any other custom tune and bimmer labs actually asked for money to tune my car :) am familiar with Winkfp NCS ... etc

Great info man! I have an '11 Z4 with paddles, so it won't work for me, but great job explaining it, I watched all the way through.

my 325i has the n53 engine, but unfortunately it says there are no tunes available :(

Did it take a while for Bimmerlabs to respond back to you with the software?

will this work on 528i ?