How to build a mini non-electric irrigation system for small villages in the hills In this video I use hydraulic ram pump to supply water to the house #WaterPump #HydraulicRamPump #RamPump #FreeEnergyWaterPump
Again it's the tall poppy syndrome. Someone tries something different and all the losers have to poo hoo or make fun of them for doing something different. Something their immature minds won't think of.
Принцип гидроудара очень интересная физика, 1 параметр длина трубы при закрывании клапана избыточное давление гидроудара стремится в зону пониженного давления чем и объясняется эффект.
Excellent work in physics on a budget to do farming, pump water to a Higher level with kinetics of water pressure. Thanks for sharing nonetheless this great way to do it.
Don’t know if proportions are right, but nevertheless this idea/ construction is very intriguing and very good! Fascinating 🖖🏻! Live long and prosper 🖖🏻✌🏻👍🏻👋🏻🙏🏻🫶🏻🤝!
Смысл понятен,вода выталкивается в верх путем колебания выпускного клапана,но здесь расчеты нужны для большого объема воды в масштабах орошения гектаров земли и т.д
Почти угадал ))) там гидроудар - вода розгоняется в трубе и клапан срабатывает, вся эта разогнанная масса создаёт гидроудар и выталкивает воду вверх. Очень интересная конструкция.
Ок, попробую прикинуть рассчеты: представим что у нас есть водонапорная башня (или несколько, в них течет вода по шлангу) на Х кубов. Берем капельную ленту с шагом между дырками 30 см. На 300 метрах ленты 1000 дырок, расход воды 1 дырки - 1 литр в час, как раз куб воды получается. Скажем у нас гектар земли там 25х400 метров, просто так считать мне удобнее), скажем выращиваем чеснок, с ручной посадкой (так больше зубчиков на 60% чем в механической посадке, и без выпадов так как сажают вручную), на 25 м ширины у нас 96 рядов чеснока длинной 400м (в ряду 4000 зубков посажены в ряду через 10 см, между рядами 20 см, у нас 16 грядок шириной 130 см (на них 6 рядов чеснока а 10 см лишних чтобы по 5 см с каждого боку было от дорожки) и между грядками 25 см дорожки (чтобы удобно ходить копать, стрелку убирать, полоть), всего 384000 зубков. НУ И НАСТРОЧИЛ Я. Так вот, 96×400= 38400 метров капельной ленты. Это 128000 дырок, соответственно 128 кубов воды, но не надо пугаться, чеснок хватит 0.2-0.4 литров наверное поливать на 1 дырку в капельной ленте, возьмем 0.25 литра. Получается 32 куба чтобы сразу полить гектар, можем разделить на 2 (в 2 этапа поливать), 16 кубов надо чтобы башни набирали воды (хотя и меньше наверное, к нас же постепенно вода набираться будет). По вложениям: если зубчик 15 грамм в среднем то это 5760 кг чеснока надо купить, скажем цена 140 гривен за кг, это 806400 гривен (при курсе 27 до 24 февраля это 29866$, при сегодняшнем 38 это 21221$). Плюс 100 000 гривен (капельная лента, кранички, шланг на 25-32мм к которому кранички подключаешь), плюс 5000 трактористу, ну и 30000 на ЗП 2 челам (которые посадят, покопают, прополят, выкопают, очистят чеснок) но наверное эта сумма х2 будет), еще удобрение пусть будет 100 000 (вообще не считал че там надо, думаю 100к хватит) короче на следующий год расходы сократятся на 900 000, и это я сверху накидывал сильно в расходах, на деле чеснок могут продать дешевле на 20-30% (при такой то закупке🤣). Теперь самое приятное, урожай и прибыль: (сорт Любаша если что) Урожай если средний вес головки 50 грамм (чем ближе к зиме тем больше веса теряет чеснок, при выкопке и сушке головки будут в среднем 80-120 грамм), 384000× 0.005=19200кг (не забываем у нас капельная лента и удобрения, прополка, можно еще замульчировать, урожай может быть +50% в идеале). Если реализуем по 100 гривен за кг (всё-таки у нас 19.2 тонн урожай, но можно много продать по интернету и по 110-140 в зависимости от размера головки), но посчитаем по 100: 19200×100=1 920 000 гривен, расходы в первый год 1млн (может и меньше быть на 10-30%, если купить дешевле чеснок), дальше сами оставляем на 6 рядах стрелку и высаживаем ее осенью, на след год получаем 500к примерно однозубок (чеснок надо обновлять так чтобы болезни не накапливались, да и нулевой расход будет головок которые продаете). Короче на след год надо зубчиков своих посадить 3.2 тонны (пока растет бульбочка, это зубчики из стрелки которую оставляли 6 рядов, почему 3.2 тонны? Ответ: 384к зубков это 64к головок по 50 грамм= 3.2 тонн ). И на 3 год у нас чистый доход (без учета налогов) примерно 1.7 млн гривен (44к-63к$). Строчил часа 2
@@Misha_from_earth красавчег,теперь расчеты по диаметру трубы ,жесткость пружины клапана,максимально возможная высота выброса воды при гидроударе и т.д.))) . Я знаю у тебя получится,заодно можно докторскую защитить...
A hydraulic ram basically invented by montgolfier brothers in the 18th a head of water uses water hammer to lift water there are many of these still being used in england i tended two of these that supplied water to tge village of hampsthwaite nr harrogate wonderful devices, needs a return to this renewable energy and no tge valves do not block up they go continually just a check once a day blead any air out of cylinder by the tap on it they just keep running few movable parts
@@DJ-uk5mm the two of them are at birstwithe hall nr harrogate one continually works then is changed over to the second ram by switching valve to second drive pipe from river the other is then serviced and on standby it uses a head of water through a six inch drive pipe to lift water from spring through a 3 inch pipe to a reservoir on hill on entry to village it continually pumps, the force of the water hammer is so strong you can feel it vibrating through the soil of the underground ram house amazing things they can pump water uphill for miles, we are idiots these days compared to our ancestors brilliant civil enginearing
Alot of the people in the comment's need to get a life n stop being horrible to this lad who made the video, he's put alot of thought n work into this idea n I think it's a great little concept, after all people have been making full scale versions of this for century's, so we'll done my man awesome little project, 👍 keep inspiring future generations with your ideas n model's!😜👍✌
This is great. My only hope here is that you put those fish, especially the tiny ones, in a better environment. Imagine swimming in a tiny concrete pool for the rest of your life 😓
Wow, dos cosas me sorprendieron.... La primera es su paciencia y creatividad haciendo todo a escala y con herramientas miniatura.... Eso no lo hace cualquier persona. Lo segundo sin sus conocimientos de ingeniería, tal vez sea ingeniero en hidráulica pero comparte esos conocimientos no es egoísta y, además nos demuestra la calidad de su trabajo... Bien hecho 👌👍. Ya tengo un buen referente para hacer similar.... Gracias. Saludos desde Tlaxcala, México 🇲🇽
Bạn đã hiểu nhầm ý tưởng của tác giả rồi, ý nghĩa của mô hình này là để lấy nước từ một con suối ở phía dưới thấp và dùng cái bơm này để đẩy nước lên ngọn đồi phía trên cao. Vì tác giả đang ở vùng đồng bằng nên mới mới tạo ra cái đập ngăn nước để tạo độ chênh cao giống như đang đặt cái bơm ở dưới suối mà thôi
This is just miniature, its more for decoration than anything. In practice you'll be labelled as a dumb ass to have these thing set up for agricultures purposes
@@havel6060 if the technology with simple engineering can work in miniature why can't this be implemented in real mega projects! You should think twice before you give your insensitive comments!
@@FF-ly4im theres a reason why an ant can fall from a 14th floor building wouldnt die but a human would from a 4th floor. Even when this is mini build would require mainterance, which doesnt translate well in real scale project, you cant mass these since it wouldnt be much effective compare to better tech we have like nuclear and stuffs. The money to build them are already a headache, and havent even mention the authority to propose the idea in the first place. This is the same problem for solar, wind energies, it only work on specific situation and cant be mass. You would have to take the geography, the cost, men power to maintain the prpject even function, and when doing math the results is just not effective at all. Even if you cut the building resources and the cost away, you would still left with elevation problem, polution and climate change problems, also toxic waste would be an ass to treat at the bottom part
@@FF-ly4im now i get that you meant well and want to improve tech like these, but they just dont work in scales, sure maybe put them at the perfect place like a huge cannal or a damp would be great, but thats all there is to it, unless people plan to terraform the whole earth, this tech will simply not "any" effective except look cool
Tôi thích cơ chế đưa nước lên độ cao hơn so với độ cao ban đầu Việc này đánh đổi bằng chuyển lưu lượng nước lớn sang lưu lượng nước ít hơn. Đúng với định luật bảo toàn năng lượng Good
@@jennifermontague3213 I've been trading with Mrs Joyce Albert for a long while now she's really amazing and trustworthy she has the skill level of trade always winning with her trading platform.
И теперь представьте 100% масштаб, если просто подавать воду, цена будет как у золота, и клапан тоже на резинке, а обратный поршень больших размеров не бывает, вывод:нужно строить ГЭС.
Genius. Although it seems "just a child's games", he made a model of how we could bring water to our houses. Without one kw of power neither a liter/gallon if fuel. Even on a hill. That's amazing! ☺️
Yes amazing. But not possible, as far as I know. It goes against the law of physics. The pressure created by the dam cannot allow water to rise above the dam without more energy. But it Intrigues me still: if I am wrong, I would like to understand where.
@@MabsDues This is science. Purely physics. And yes a bit unbelieveable. Water rise above! 😲 But it does. 😁 Remember sucking liquid with a tube. It already flows a bit above (eg from your car gas tank into a gas can). Ram pump got more pressure. I'm looking for a link, but a short explaination here: The magic is pressure. Water flows a bit down in the begining before reaching the ram. Water flow meets the first valve in the tube. After enough water the valve closes. The only way for the water now is above into the tube with the decompression tank. This valve is still open. After enough water/ pressure this valve closes. Meanwhile the lower valve (less pressure now) opens again. But shortly will close again after enough water from the feeder pipe. Thev above valve is already open again (after pressure relief from the water flowing through the lower valve). This makes the clack clack sound. You can here this sound, too in your washing mashine, if water pressure comes too quick. Big hydro power plants fear this setback and are busy to avoid it. There is a castle in Germany which pumps water up the hill since ages. Ram technology was famous until the1950ties. Yes, until we think pumps running by fuel/ power are more efficient. Yes, they are. A Ram pump can only pump 20% of the water it was supplied with. A lot of water runs down at the so called waste line. And therefore it needs time. eg 24h to fill a big water tank. And it doesnt like winter (ice, frozing water). You have to tinker some until it works by its own. It doesnt like material from the creek (sand, silt, leaves) and has to run air free. But there are engineers around the world who tinker about all these advantages. Russian and German (Swiss too) engineers are reinventing and improving it now. Some got brilliant ideas to use the power behind. They put a generator or turbine to produce electricity on to it. Brilliant in my eyes. Because "free energy" made by nature is needed in future. It sounds magic, but it is pure science 😁
LOL!! Bet this gubber worked really hard mixing all that concrete and carrying those HUGE BUCKETS too the location of that HUGE POUR! Got sweaty just watching it!