French Cleat Tool Wall - Ultimate Shop Organization

Подписаться 24 тыс.

Просмотров 60 тыс.

50% 1

I finally organized my tools in my workshop using a French cleat wall. With this new system, my tools are organized and are arranged on the wall in a way that supports efficient work execution in my shop. In this video I take you through the steps of creating the french cleat wall as well as the various custom storage containers you can make for tools and small power equipment in your shop.
eigen_desig...
www.tiktok.com/@eigendesigns?...
Equipment & Tools:
Dewalt Job Site Table Saw: amzn.to/3kyOBYU
Dewalt Planer: amzn.to/3itC6en
Bosch Benchtop Router Table: amzn.to/3ik9vIA
Makita Router: amzn.to/36OKxvs
Craftsman Air Compressor Set: amzn.to/3kz3zhv
Countersink Drill Bits: amzn.to/3BuBE8G
Titebond III Wood Glue: amzn.to/3BiUyzc
Titebond Original: amzn.to/3iqjBYp
DeWalt Clamps: amzn.to/3BiC5Ti
DeWalt 20v Cordless Drill Set: amzn.to/36Oe9ck
Bessey 18” Parallel Clamps: amzn.to/3hOmdjC
Bora 40” Parallel Clamps: amzn.to/3itiGq6
DeWalt 5” Orbital Sander: amzn.to/3hNIdLt
Abranet Sanding Discs: amzn.to/3rjeOMz
13-Piece Spade Drill Bit Set: amzn.to/2UlBT5g
Kreg Pocket Hole Jig: amzn.to/3kAjUmg
Dust Collection:
POWERTEC Downdraft Panels: amzn.to/2V055hR
Dust Right Small Port Hose Kit: amzn.to/3kBnAUK
Dust Right 4” Quick Change Set: amzn.to/3zhAueu
Powertec 4” Blast Gate: amzn.to/2VQbQDo
Powermatic 20” 2-micron Filter Canister: amzn.to/36K5Caz
Camera and Lighting Accessories:
HAITENT phone 86” Tripod Stand: amzn.to/3xV26pF
PHOPIK Softbox Lighting Kit: amzn.to/3zjz5o1
Music Credits:
"Nothing" - Domtaro
"Imagine" - Auxie
"Feelings" - Steam Phunk

Хобби

Опубликовано:

2 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 41

@WoodfulProjects 2 года назад

Very well done.

@utmg2012 3 года назад

Fantastic job!

@jaimeecaballeros9742 2 года назад

good job on your wall storage, man. good idea for my messy floor. God bless.

@lockdupfishing385 3 года назад

Really awesome job! I did a lot of research before building my cleat wall and still wish I would have done a few things differently.... They are such a joy to make..... A great way of training you're craft and testing you're mind on top of being a very cost effective storage option

@GoMandiMartin 10 месяцев назад

This is awesome! Thank you so much! 😃

@paddle_smith 2 года назад

Looks great! Thanks for sharing!

@EigenDesigns 2 года назад

Thanks for the support!

@frankb.3556 9 месяцев назад

Great job!

@Woodcraft716 3 года назад

Nice work. Liked and Subscribed. Looking forward to seeing more of your videos.

@EigenDesigns 3 года назад

Thanks for the support. I have some cool stuff coming up with a OneFinity CNC on the way so stay tuned for more on that. Have a great day!

@benjenkins2415 2 года назад

Great video. I want to the same, so I appreciate the detailed walkthrough.

@EigenDesigns 2 года назад

Ben, it's been the best thing for my shop. Because every tool has its own place it forces you to keep things organized. It has been such a game changer for me in terms of shop cleanliness and tool organization.

@FearsomeWarrior 3 года назад

Hello. Wall looks great. What are the chances you’d make a video taking down and showing the other custom holders? Always curious how people design and put together their tool holders. Some very good looking and functioning designs but they’re only brief glimpses of them in this video. The pneumatic nailgun one looks amazing but seeing how even the simple ones like the clamp racks is interesting too. Found your InstaGram too. Maybe you’d post some awesome shots of stuff on there? Thank you :)

@DudeSawdust 3 года назад

I just stumbled upon your channel and couldn’t pass up watching a French cleat tool wall video. I did the same thing on my channel. I noticed you filled up that wall pretty fast. Mines probably less than half full but I’m doing videos on most tool holders moving forward. Great content!!👍👍👍

@EigenDesigns 3 года назад

Thanks Dude Sawdust. Love your channel name. I am pretty new to the content creator side of things here on RU-vid (~3 months or so), but I am having a really good time.

@DudeSawdust 3 года назад

@@EigenDesigns i need you to convince my wife it’s a good name. She hates it

@joseelisha7753 3 года назад

Pro tip : you can watch movies on instaflixxer. I've been using them for watching all kinds of movies these days.

@mariojagger7975 3 года назад

@Jose Elisha definitely, have been using instaflixxer for since december myself :)

@denveraarav1025 3 года назад

@Jose Elisha yea, I have been watching on instaflixxer for since november myself :D

@taher_farid Год назад

*تسلم ايدك بجد ممتاز*

@EigenDesigns Год назад

مرحباً بك😄

@taher_farid Год назад

Come on, I offer the same content, I come from Egypt, but I'm very good with your hand.

@queendidine 2 года назад

5 stars from my side.

@EigenDesigns 2 года назад

Thank you :)

@francesco1498 3 года назад

Great job, i subscribed to your channel. Can I ask you the measurements of the french cleats? Length, width and height? Thanks Francesco

@EigenDesigns 3 года назад

Hi Francesco! I made the french cleats out of 3/4" plywood so they are all 3/4" thick. The french cleats that went onto the wall were all 70" long and the high-side of each cleat was 2.5" tall. I hope this helps answer your questions.

@kashyappalicha797 3 года назад

@@EigenDesigns can you also tell us what was the height of the spacers used?

@EigenDesigns 3 года назад

@@kashyappalicha797 The spacers were 2.75" tall which makes the gap between the cleats 1/4" larger than the mating cleats that are used on my tool holders. You can certainly make the spacers larger, but I wanted to make the cleat rails as tight as possible.

@davidcollins1705 2 года назад

Did you think about putting the cleats on the plywood before installing the plywood on the wall? I am thinking about mine atm so trying to think it through any pros cons.

@EigenDesigns 2 года назад

That’s a great question. You could certainly do that. Two things to consider: pre-installing the cleats will make it heavier, so if you’re working alone that could make things more challenging. Secondly, you won’t be able to use the cleats to hide the screws that hold the plywood to the wall. But if those two things are not an issue and you could certainly pre install the cleats. I hope this helps :-)

@Flipping_Assets 3 года назад

What happens when you upgrade tools with different designs and the wall mount doesn't fit the new tool?

@EigenDesigns 3 года назад

That's a good question. I have come across this already and have handled it two different ways. If the new tool has a similar design to the old one, you can modify your existing holder to make it fit. Alternatively, I have just built entirely new containers. The plywood I use I mostly from scrap pieces left over from old projects so there is minimal cost and it generally takes around 10-15 minutes per holder.

@EigenDesigns 3 года назад

Hey Robert L. I made a few more containers for my French cleat wall to better organize my clamps and thought you might get some value from watching it. I know you were curious how to handle new tools being added to the collection. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-ERxP_fEIB3E.html

@jacobpicard25 2 года назад

What size is your French cleat wall?

@EigenDesigns 2 года назад

Hey Jacob, My French cleat wall is 72 inches wide and 84 inches tall

@SwapnilBhartiya Год назад

why you need to put plywood on the wall? Seems like waste of $$ and wood.

@EigenDesigns Год назад

It was an attempt to save the drywall in the garage. I was concerned that tightening down the cleats directly onto the drywall would cause them to "sink in" to the drywall and leave an imprint if I ever wanted to remove them. At the time, a sheet of plywood was ~$40 so I elected to spend that money to protect the drywall in the garage. Hope that helps. Have a good one Swapnil :)

@mvwo Год назад

@@EigenDesigns I am thinking about that problem right now.. I have to make a decision, do you recommend it? Here it costs nearly 80 usd..

@EigenDesigns Год назад

@@mvwo I would still even do it for $80 USD. If you ever end up taking the french cleat wall down you can always re-purpose the plywood for another project. BTW, my french cleat wall might be my favorite shop project I have done thus far. It has helped me stay organized in the shop and not clutter my shop with excess tools. Good luck building!