Fresca Dual Flush Toilet Fill Valve Repair Project 

Thanks for this. Cleaning the rubber seal stopped my toilet from constantly dripping! Great video.

Thank you for this video. I have 2 of these toilets and both started giving issue within the same week. I had a plumber come and quote me $300 per toilet. I watched your video, took out the pieces and rinsed them, put them back in and everything works fine now. Saved me $600, thanks !!

This worked great, solid steps on each portion and fixed a super annoying leak for 10 minutes of cleaning

Awesome video Nai-jalong. Thanks for sharing. I've watched tons of videos and spent a lot of time without success . Your is very clear and simple. After watching I've fixed my toilet literally for 5 min. Thanks again.

Thank you - again, you are the ONLY video out there showing how to clean and/or remove this model - after much searching. You saved my bacon! Removed and cleaned as shown and it solved the slow, squeaky leak we had. This was a life saver...

Thanks for posting. I had the same problem and this fixed it. There was actually nothing inside, no dirt or scale or anything, so I am inclined to think that your "fix" only indirectly addresses the problem.

Thank you very much for this! I had been looking for a video on how to dismantle this type of flushing mechanism, since my fill valve was not closing at all. This has saved me from hiring a plumber! God bless you sir!

thank you! this is the only source online that I could find after much googling that speaks to the problem I was having.

Thank you so much for uploading this video, ive just followed your steps and its fixed my leaking toilet. You have probably just saved me a small fortune. Thank you so much

Thanks to your video I managed to stop running water from inlet valve, thank you soo much God bless

Thanks!! Just sorted out my constantly running toilet.

Thanks for making this video. My toilet is now working and it took 10 minutes!

That was great. Just fixed my Costco waterridge C22148C. Great instructions. Thank you!

I soaked the whole unit and the seal in boiling water and cleaned it from all debri build up and its like new. Thank you for this video

I have a little bit different system but filling mechanism looks like this. Was looking how to disassemble and to clean it and this video helped a lot.

Nice design, works well and very easy to set up.

Thank you! Having issues with the same fill valve will give this a try soon!

Fixed my toilet as well. THANK YOU!!!

Thank you! Very easy to follow video. Just need to find a new seal now, as one of the little flaps has bent and won't go back.

Wow, thank you for your video. I just fix my running toilet!

Thanks, fixed in less time than 10 min. Thought I was going to have to by new.

Thank you for the video. I was able to fix my wc. You are Awesome

Worked Great. Thanks for the helpful video.👍

Excellent. Très bien expliqué. Merci beaucoup

Great video. I couldn’t remember how to get the head of the inlet valve apart and your video made it clear. It seems you have to clean the seals in the valve on these about every couple years or it will leak. Thanks!

Thanks! It took me a while but next time will be easier.

A big thanks for this video!!! It works

Thanks for posting this video. Really helped me with my Uberhaus. 🙏Some commentary would make it better though.

Great video. Thank you.

thank you! very helpful!

thanks for vid. Fix the valve and saved me from calling the plumber!

Thank you for Saving my Marriage! I applaud you!!!👏👏👏👍

Find it ! There is no other way than gently loosen the plastic pins with a screw driver to remove the fill valve cover. Finally solve the problem. Toilet is now working great.

Now, how did he remove the gray top from the fill valve? BTW he put the flash valve wrong. White side is the full flush which should be on the left. See the beginning of the video and than see the end. However I do appreciate the video, thanks!

Awesome worked great

Good stuff, thanks

Thank you

Thank you, thank you. Helped me fix the exact same issue myself. Maybe well water caused the buildup on the rubber seal?

Thanks! Great video. It was easier taking off than putting back on. Not sure how the locking clip on fill valve work as it totally came off. I slapped it back on but don’t know if I did it correctly but my noisy toilet is quiet now! Mine was just noisy when refilling. It wasn’t leaking but this fix worked! My rubber casket was getting old. Wonder if they sell new ones. I cleaned both gaskets.

How did you take the top off of the fill valve?

I have the same problem, is it to just clean the washer under the tap ?

Thanks for the video this has been causing me problems for weeks.. I have the same model B3300 but no white tubes/hoses attached just the outlets, Any ideas?

I am not able to loosen the fill-valve pushing on the black clip at the base. The black clib is just a rubber to ensure it is water tight no? or is there another clip that I am not seeing?

So how do you attach the little clip on the left-hand column? Couldn’t figure it out, so just left it off. Where can someone get a repair manual for these things?

Did u have to push the Bottom black clip upwards after finishing ?

What is the thin pipe that kinda loops from the fill valve on the left to the overflow to the right? I don't seem to have one of those!

Thank you for the video, do you know how to adjust the water level? I have been searching on RU-vid by I found only different model adjustments

I put a Korky universal in from Home Depot.

Where can I buy the fill valve seal for the specific model I have this model but can not find a seal for it at all

Chen Min did a good job in introducing.We also mainly provide toilet accessories.Including this brand WDI. If you have bulk or retail, you can come to us. Thank you.

Great video. But it would be exponentially better if you talked.

Informative but how do you adjust the water level higher?

I pushed down the black clip on the fill valve but I don’t seem to be able to then adjust the height. Any ideas? Thanks!

Worked for an American Standard 2534C. What a wacky thing...?!

At 1:36 you jump to holding the gasket without showing how to take the white plastic part of first…

Thumbs up from me.?

speak up, I can't hear you

These things are such a pathetically stupid design; nice to know you can take them apart, but way more complicated, delicate, prone to clogging and hard to get parts for than can possibly be justified. Who comes up with this stuff? There's lots of designs on the market that work fine.