Тёмный

From the Field -- HobbyKing P-51 'Galloping Ghost' Assembly & Flight Review | The RC Geek 

The RC Geek
Подписаться 54 тыс.
Просмотров 8 тыс.
50% 1

This HobbyKing P-51 'Galloping Ghost' is a model that came into the shop recently for review. At a 1016mm wingspan, it's a neat little hand toss model. Assembly was super quick and the finish is really nice. While the model doesn't include all of the modifications that were present on the full scale, it still looks cool in flight and is a nice homage to the full scale. The model can be flown on a 4s 2200mah pack that gave 4+ minute flight times. For hand launching, a stiff under arm toss works well with the power at about 2/3 throttle. There is a high performance upgrade as well which will be covered in a separate video. :) #GallopingGhost #TheRCGeek #HobbyKing
Like the shirt? Get it here! ► bit.ly/GeekRIPTApparel
▼Links to Everything used on the model below▼
H-King 'Galloping Ghost' ► bit.ly/HKP51GG
4s 2200mah Battery ► bit.ly/Sptm4s2200
Spektrum NX Radio ► bit.ly/SpktmTx
Spektrum AR620 Receiver ► bit.ly/SptmAR637
ERNST Airplane Stand ► amzn.to/3ftOv0w
▼HELP SUPPORT THIS CHANNEL▼
Shopping through the following links helps support this channel!
Horizon Hobby ► bit.ly/HorizHby
Legend Hobby ► bit.ly/LegendHobby
Bitgo Hobby (Dynam) ► bit.ly/BitgoHby
AMain Hobbies ► bit.ly/AMainHby
RIPT Apparel ► bit.ly/3ghD7Xy (Awesome Geek Shirts!)
StarBond CA Glue ► bit.ly/StarBondCA (Use Code "Geek10" at checkout to save 10% OFF your purchase!)
Amazon ► amzn.to/1WneysW
TRCG Swag & Shirts►teespring.com/stores/the-rc-geek
TRCG Centerburner AB Lights ► thercgeek.com/centerburner
TRCG 3D Printing ► thercgeek.com/category/3D-Parts
Don't forget to subscribe, new videos added every week! bit.ly/1Wnhplx
Blog: thercgeek.com
Facebook: / thercgeek
Twitter: / thercgeek
Instagram: / thercgeek

Развлечения

Опубликовано:

 

6 авг 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 58   
@DadsRCHangar
@DadsRCHangar 3 года назад
Great flight Chris, certain a great plane, looks like she flew on rails 👍🏻
@JeffsCustomRC
@JeffsCustomRC 3 года назад
Great work Chris!! Lovin this plane myself, what a joy to fly, thanks for sharing 👊🏼👊🏼
@Thercgeek
@Thercgeek 3 года назад
Thanks man! It’s neat little airplane.
@NeedSpeedRC
@NeedSpeedRC 3 года назад
Good review. I really like this size. Thanks for providing the D/R rates in percentages.
@Thercgeek
@Thercgeek 3 года назад
Thank you!
@theresnobodyhere5778
@theresnobodyhere5778 3 года назад
cant wait to see it with the upgrade sport motor ,its great looking model , fun plane to have easy to carry in back of car
@FlankerTanker
@FlankerTanker 3 года назад
Best review I have seen on RU-vid - thanks
@Thercgeek
@Thercgeek 3 года назад
Thanks!
@airhammer6203
@airhammer6203 3 года назад
Good stuff Chris.
@hammertime964
@hammertime964 3 года назад
Another good video Chris, Thanks!
@Thercgeek
@Thercgeek 3 года назад
Thanks!
@mithrandir1313
@mithrandir1313 3 года назад
slows down nicely for landing!
@Mikeylikesit1968
@Mikeylikesit1968 3 года назад
If anybody has had the Parkzone P-51 , that was a fun flyer , many of us had one and stuck in a faster motor ,higher amp esc and flew it on 4s . This kinda would replace that . Im going to buy one when they come in stock at US HK
@royperry4219
@royperry4219 3 года назад
The Parkzone P-51 was an outstanding foamie. I still have two . I ordered a HK P-51.
@calebshuler1789
@calebshuler1789 3 года назад
Pretty awesome
@rafaeltorres2886
@rafaeltorres2886 2 года назад
It's on Back order in the U.S. I ordered one on 8/10/21 it's 9/2/21 and they don't know when they'll get more. Ok they have more now and I got mine I'm going to install a standard reciever with Hobby Eagle stabilizer.
@volksyes9477
@volksyes9477 3 года назад
Love the plane and great review as always, also why do I have a strong feeling that you will clip the wings of the high powered version. Just like the real one did when it was still around. I could be wrong. But yeah keep them coming 🤘🤘
@Thercgeek
@Thercgeek 3 года назад
We’ll see because they really clipped the wing on the full scale, haha! It would be fun to clip it a touch and also remove the radiator scoop underneath just for fun. My concern would be successfully launching it though, I’m so bad at hand launching, haha!
@volksyes9477
@volksyes9477 3 года назад
@@Thercgeek I’ll watch closely for that one. Haha
@thomasallan8113
@thomasallan8113 Год назад
@@Thercgeek hand launch the plane with ur right hand overhand like a spear while having the radio on a neck strap and ur left hand on the stick.
@terryperrott9913
@terryperrott9913 3 года назад
Very sleek, when you CG'd it how come inverted ?? Any particular reason?
@Thercgeek
@Thercgeek 3 года назад
It was just simpler that way. Cg-ing inverted or right side up, it doesn’t matter.
@jordansrc4245
@jordansrc4245 3 года назад
Hey! When are the videos from WBAC coming out?
@Thercgeek
@Thercgeek 3 года назад
Should be the next week or two. 😊
@motiv311
@motiv311 2 года назад
Just bought this.... PS I see some grass and dirt you could land in right next to your "runway"
@Thercgeek
@Thercgeek 2 года назад
Cool! The grass strip on the side isn't very wide at my field and the dirt is quite rocky. So, better off just landing on the runway usually.
@lancelatta7456
@lancelatta7456 3 года назад
Looks a bit softer landing right next to the concrete runway. Aim for that strip of grass on landing. I hand launch a lot, overhand like you are throwing a paper airplane works way better for me. Another good video. can't wait to hear about the motor upgrade.
@Thercgeek
@Thercgeek 3 года назад
Thanks! A good idea, but the area next to the runway isn’t as soft looking as it looks, haha! It’s also not very wide either unfortunately. Otherwise that would be the way to go for sure.
@anthonydennis4834
@anthonydennis4834 3 года назад
Do I see a new soon to be released F-14 in the background on the table at 0:43?
@Thercgeek
@Thercgeek 3 года назад
That’s my refinished freewing F-14. 😊
@anthonydennis4834
@anthonydennis4834 3 года назад
@@Thercgeek oh!😁
@arachnoyes
@arachnoyes 3 года назад
Where can I get that gauge you used to adjust your Ella run labs etc. etc.
@Thercgeek
@Thercgeek 3 года назад
Unfortunately it’s a piece of hardware that great planes made that has been discontinued. I’ve been trying to figure out how to source something similar to sell them, but so far no luck. 😕
@arachnoyes
@arachnoyes 3 года назад
Thanks for your reply.
@blakemcreynolds1456
@blakemcreynolds1456 3 года назад
Oh your from California. What part and what flying field do you fly at. I fly at Amos in Sacramento
@Thercgeek
@Thercgeek 3 года назад
I’m in San Diego
@vintageracer3734
@vintageracer3734 Год назад
Hey Chris, ole' buddy, how could I get a set of those decals you made...I can pay in US currency, that I actually earned while working an actual job, in the aviation field! PS, have you seen the vid where it goes 180mph?
@Thercgeek
@Thercgeek Год назад
I only have the numbers, if that’s what you’re looking for? Shoot me an email through my contact form and we can talk more about it.
@yarsmythe
@yarsmythe 3 года назад
Looks like the same mold as the Tower Hobbies P-51 Racer Red.
@Thercgeek
@Thercgeek 3 года назад
Could be. Someone else mentioned that too and looks similar.
@johnw5734
@johnw5734 3 года назад
Why is it a cool subject plane? I'm sorry but I just have bad feelings around the ill-fated Ghost. Will you be pulling a 17G back stick and dive into a group of Lego figures.
@Thercgeek
@Thercgeek 3 года назад
Bad feelings indeed...despite the very sad end and the terrible loss of those in the crowd, it was an iconic Reno racer and it as well as the victims on the ground should all be remembered.
@johnw5734
@johnw5734 3 года назад
@@Thercgeek Yes, you're right.
@TMB5BER
@TMB5BER 3 года назад
You could say the same about Chris’s Tomcat , after Dale passed , but it’s better to fly it and remember and honour those pilots and people involved while you do it
@guaporeturns9472
@guaporeturns9472 2 года назад
Ignorant comment.
@floridamancomedy3151
@floridamancomedy3151 3 года назад
You should defiantly replicate the Reno air show crash with it, set up a bunch of maniquans, over power the motor and dive bomb them…..sorry that was a bad idea
@Thercgeek
@Thercgeek 3 года назад
I think I’ll pass on that one... 😉
@johnnydep8979
@johnnydep8979 3 года назад
1st....yeehaaaa
@Thercgeek
@Thercgeek 3 года назад
Yassss!
@gordonfraser6025
@gordonfraser6025 3 года назад
Hobby king have got it so very wrong tith the choice of this particular aircraft colour scheme. This is the Mustang that dived into the crowd at the Reno air races a couple of years back. Very bad taste Hobbyking. You could of done any other scheme other than this one.
@Mikeylikesit1968
@Mikeylikesit1968 3 года назад
what about the WW2 planes that killed many people in the war , so its ok to make planes like that. The plane didnt kill the people, its the people that did a poor job maintaining the plane. Real planes crash all the time and they still make models airplanes of those that crashed.
@williamdecker3989
@williamdecker3989 2 года назад
Worst Air show disaster in US history, I agree. I watched the race when it happened. They could have picked so many other schemes than this one! Pilot & 10 killed, 69 injured badly.
@Thercgeek
@Thercgeek 2 года назад
There’s been mixed reactions emotions across the board to the scheme. It was an absolute terrible disaster, but it shouldn’t be forgotten either and the airplane still represents a very notable piece of aviation history.
@nocturnalmayhem0
@nocturnalmayhem0 2 года назад
wow bad taste hobbyking, why not rarebear or one of the other p51s that race..but nice looking plane
Далее
Smart Sigma Kid #funny #sigma #memes
00:26
Просмотров 8 млн
E-Flite Habu SS maiden!
9:22
Просмотров 1,9 тыс.
#PRO_METRO Как надо
0:57
Просмотров 4,2 млн
#PRO_METRO Как надо
0:57
Просмотров 4,2 млн