Front Brake Service with Brake Pads Change KTM Duke 390 125 250 200

Подписаться 25 тыс.

Просмотров 31 тыс.

50% 1

Routine service of the front brake of the KTM Duke 390 125 250 200 including changing the pads as well as stripping and cleaning to ensure they carry on working well.
Torque settings: Brake caliper bolts 30 Nm
Brake fluid SAE 4 or 5.1
Note that stock front brake pads are Brembo HH
Instagram: / moto_mirius
Subscribe to keep up to date with the regular content: bit.ly/2UWwY90
___
Some links may earn me a small payment - but cost you nothing
Links to Where I Purchase Parts:
eBay: ebay.to/2Io2l6L
Amazon: amzn.to/2KvMiFA
___
2017 KTM Duke 390 Parts List:
- Power/ Sound
Akrapovic Slip On Exhaust KTM/RC 125 390: bit.ly/MotoMiriusKTMAkrapovic
Akrapovič Exhaust Grommet: bit.ly/AkrapovičExhaustGrommet
Exhaust baffles: www.pipewerx.co.uk/webshop/ac...
Decat Pipe Leovince Duke 390 2017 - 2019: bit.ly/MotoMiriusLeovinceCatDe...
Arrow Cat only Delete pipe: bit.ly/ArrowDeCatLinkPipe
Stunt/ Protection
Rok Bagoros Two Finger Stunt Clutch Lever: bit.ly/MotoMiriusStuntClutchLever
Magura X-Line Handlebar: bit.ly/MotoMiriusRokBagorosHan...
Rok Bagoros Adjustable Crash Cage: bit.ly/MotoMiriusRBAdjustableC...
Rear Sprocket 56 Teeth: bit.ly/MotoMirius56tStuntSprocket
Rear Sprocket 50 Teeth: bit.ly/MotoMirius50tStuntSprocket
O-Ring Chain 520 SRO6 120 Links: bit.ly/MotoMiriusORing520Chain
Galfer Wave Front Disk DF940CW
Rok Bagoros Front Freestyle Crash Pegs: bit.ly/MotoMiriusRBFreestyleFr...
KTM Powerparts Engine Cage
Service
R&G Paddock Stand Slider: ebay.to/2UgX1Dp
KTM oil Change Kit: bit.ly/MotoMiriusKTM390OilChan...
K&N Oil Filter: bit.ly/MotoMiriusKNOilFilterKT...
Style
KTM Powerparts Bar Ends: ebay.to/2Xcfv9U
KTM Powerparts USB Power Outlet Kit: bit.ly/KTMUSBPowerKit
___
Playlist 390 KTM Duke: bit.ly/2VGE3I0
____
Follow me here:
Instagram: / moto_mirius
Facebook: / motomirius
Website: www.moto.mirius.co.uk
___
Music provided by Epidemic Sound: www.epidemicsound.com/referra...
___
Logo: bit.ly/2Zau67P
#RokONSquad #MotoMirius #KTM390
moto mirius,RokONSquad,rok bagoros parts,ktm 390,ktm motorcycle,ktm,
ktm duke 390,390 KTM Duke,ktm duke,duke 390,390 duke,duke 390 mods, 390 duke mods, duke 390 modified
2017 ktm duke 390,ktm duke 390 2017,2017 duke 390,390 duke 2017,duke 390 2017,2017 ktm duke,2017 duke 390 modified,2017 duke 390 mods,
2018 ktm duke 390,ktm duke 390 2018,2018 duke 390,390 duke 2018,duke 390 2018,2018 ktm duke,2018 duke 390 modified,2018 duke 390 mods,
2019 ktm duke 390,ktm duke 390 2019,2019 duke 390,390 duke 2019,duke 390 2019,2019 ktm duke,2019 duke 390 modified,2019 duke 390 mods,
2020 ktm duke 390,ktm duke 390 2020,2020 duke 390,390 duke 2020,duke 390 2020,2020 ktm duke,2020 duke 390 modified,2020 duke 390 mods,
ktm rc 390,ktm rc,ktm,rc 390,390 rc,rc 390 mods, 390 KTM rc
2017 ktm rc 390,2017 ktm rc,2017 ktm,2017 rc 390,2017 390 rc,2017 rc 390 mods,2017 390 KTM rc,ktm rc 390 2017,ktm rc 2017,rc 390 2017,390 rc 2017,rc 390 mods 2017, 390 KTM rc 2017
ktm duke 125,125 KTM Duke,duke 125,125 duke,duke 125 mods, 125 duke mods, duke 125 modified
ktm duke 250,250 KTM Duke,duke 250,250 duke,duke 250 mods, 250 duke mods, duke 250 modified
ktm duke 200,200 KTM Duke,duke 200,200 duke,duke 200 mods, 200 duke mods, duke 200 modified

Авто/Мото

Опубликовано:

18 мар 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 100

@bigred1uk 2 года назад

I’m an IT engineer who has never worked on my own bikes until I purchased a 390 Duke and found your videos . Now I’m actually getting my hands dirty thanks to you. Thanks for doing these videos , Great job 👏

@MotoMirius 2 года назад

Thanks Derek, glad to be of help and fantastic that you have made that step.

@tryplecrown 2 года назад

Just wanted to say thank you for your videos! Just got my motorcycle license and bought my first bike (about time, I'm almost 50) and went w a used 2019 Duke 390. Your videos are incredibly helpful as I'm getting familiar with the bike and learning basic maintenance. It's one thing to see someone give a general tutorial, but to see it on the actual bike and components I'm working on gives me much more confidence to take on each project. Thanks again and keep up the great work!!! Subscribed ✅

@MotoMirius 2 года назад

Thanks and congratulations on working on your own bike. I completely agree about the general tutorials - they are great for people who have a good understanding of working on mechanical parts, but not so good for people who are new and aren't familiar with what they are looking at. Good luck with the bike.

@AliRaza-hl6lh 20 дней назад

Best break cleaning video class i have ever seen and searched. Very nice and well explained. Thank you

@MotoMirius 20 дней назад

Glad it was helpful! Thanks!

@nerfmaster33 3 года назад

Bro thank you so much for this video, i needed to switch my rotors and pads. This helped alot 💯

@MotoMirius 3 года назад

Glad it helped. Skäl David

@tinks43 3 года назад

Looks like a simple little caliper to me. Easy work. Love the No4 Enfield on the top shelf too! 👍🏻

@MotoMirius 3 года назад

Thanks. It's a nice little four pot Brembo caliper. Love when you can easily just pull the pads and pins. Nice ID, reminds me of being younger!

@osamaaijaz4055 3 года назад

Much awaited video from your channel! 👍 It would be great if you could make a sequel vdo for the rear brakes & also bleeding brake system will sum up complete brake service. Thanks!

@MotoMirius 3 года назад

Thanks. Rear brake will be coming up soon, bleeding will be after that.

@kevincamp6976 2 года назад

Thank you so much for your videos…. They are the best

@MotoMirius 2 года назад

Glad you like them! Thanks

@emilesteyn7648 2 года назад

Thank you very much! Helped alot i had no clue how to service my brakes

@MotoMirius 2 года назад

Glad it was of help.

@yannisgiokas 7 месяцев назад

THANKS for the videos.Great help for us all. Just a comment though, before any one presses the pistons back on any caliper car or motorcycle should always clean them first thoroughly.in this way we prevent damage to piston seals from dirt beeing pushed back in to the seals.

@Kuper133 2 месяца назад

Всегда с интересом смотрю твои видео. Они очень полезны для меня. У меня куплен KTM Duke 250.

@MotoMirius 2 месяца назад

Хороший выбор, 250 - хороший мотоцикл. Спасибо

@BhargavaJaisimha 3 года назад

Thank you so much for this! It seems a lot easier than I thought it would be TBH.....

@MotoMirius 3 года назад

I always appreciate a well designed unit that is easy to work on.

@BhargavaJaisimha 3 года назад

@@MotoMirius I agree with you completely... Having said that this is my first bike HAHA Your videos have been very helpful and I hope you get more recognition soon :)

@MotoMirius 3 года назад

@@BhargavaJaisimha Thanks. You will find that once you've worked on the brakes a few times, you'll be able to use that knowledge on any brake system, so it's great to see you on that journey.

@yoldayizbiz Год назад

Thank you for sharing this video.

@MotoMirius Год назад

Thanks for watching!

@marcelotinelli6543 Год назад

Great video. Love british accent. I'll do the same to my KTM. 👋🏼 From Arg 🇦🇷

@MotoMirius Год назад

Thanks, much appreciated and good luck with that!

@onrcnr2645 Год назад

Teşekkür ediyorum sayenizde hemen balata ları temizledim

@MotoMirius Год назад

Teşekkür ederim. Bunu yaptığın için aferin!

@Kuper133 Месяц назад

Подскажи пожалуйста, у меня вопрос не по теме. У меня на мотоцикле при движении слышится какой то шуршащий звук. Его хорошо слышно. Это нормально? Может это цепь ГРМ? Может приводная цепь трет? Я не могу понять. Это мой первый мотоцикл. KTM Duke 250

@affinitystablepeanuts Год назад

Hi David. Thanks for this cool guide, very easy to follow. Have some questions: what is that bronze coloured substance you apply while bolting the caliper back on? Is this the same thing you apply to the pad pin? What is this? And why that instead of a loctite?

@MotoMirius Год назад

Thanks. Bronze substance is heat resistant anti-seize because here salt is used in winter and it quickly corrodes brake components - in the US it would normally be silver, but in the UK bronze colour. Not loctite because KTM don't specify it, and also because the caliper gets very hot and most loctite products are heat release.

@affinitystablepeanuts Год назад

@@MotoMirius thanks for your reply!

@sookiantat7851 Год назад

Hi Mirius Can I just use normal 4WD spray to clean the brake pad the all the parts around that? Or there is other better option ?

@MotoMirius Год назад

WD40 is a water dispersement fluid. You can use it in some places but it can leave an oily residue which the brake dust will stick to, so brake cleaner is the better option.

@lukasmajer6327 Год назад

Hi, what is the torque for the guiding pin? It’s not stated in service manual. Thanks

@MotoMirius Год назад

There is no torque value for it, just snug it up tight and do not overtighten it.

@cnrom 3 месяца назад

Does anyone know what is the springy thing for? Is it just for keeping the pads from rattling?

@MotoMirius 3 месяца назад

It helps to keep the pads aligned as they move in and out, reducing the risk of a pad jamming, and as a side benefit they reduce any rattling.

@ktmdukeracing 3 года назад

I need a front wheel slider just like yours. Where did you get it?

@MotoMirius 3 года назад

These are from Bagoros Performance

@Statek63 2 года назад

Thank you David ! Another great video 🙂 One question regarding the brake pistons - are these sealed with O-rings or something similar ? Does the gap in between the piston and the caliper block need any other care than cleaning ? My understanding is that if the pistons are really hard to move in or out - then a side effect of that would be a quite significant residual pressure on the pads even without touching the brake lever. I will dig deeper into KTM service manual (I got the DVD version) but maybe you already know this and maybe you can suggest if the gap and any eventual piston O-rings needs any lubrication ? I know it's a place where one needs to be super careful not to get any oil on the disc or on the pads - but again should these get a touch of a lubricant ? I came across some brake parts lubricants from Permatex and they seem to be intended just for this purpose ? Cheers 🙂

@Statek63 2 года назад

OK I checked some Brembo caliper disassembly guides and I have an idea how it's built internally. So I guess inside the piston seal it's only the brake fluid which is the lubricant. What can be lubed (lightly) with a high temperature silicone grease could be the piston outside the seal including the dust cover inside surface - and that only very carefully and in minimal amount of grease - not to contaminate the pads or disc. Would you agree with that ? Or would you suggest something different ?

@Statek63 2 года назад

Or maybe these Bybre calipers do not have dust covers at all ? I guess I need to check the service manual... Cheers 🙂

@MotoMirius 2 года назад

All calipers are much the same regardless of who makes them, although the fine details of the design vary. There is a fluid seal which fits into the caliper which keeps the brake fluid inside the caliper. There is then a dust seal to keep the brake dust and dirt out - normally also fitted inside the caliper with most caliper design. Any lube will attract dust - when fitting you can lube with brake fluid to allow the piston to slide in past the seals. Backs of the brake pads normally get a smear of high temp grease as it can reduce chatter between pads and piston and can result in brake squeal. When the seals get old, hard, dirty or damaged then they tend to grip the pistons making it harder to apply the braked and stop them retracting properly resulting in drag. Regular cleaning helps stop this happening but sooner or later the seals will need changing out.

@tannermeyer8136 3 года назад

How many mi/km do you have on your duke 390? Also these videos have been so helpful!

@MotoMirius 3 года назад

Thanks, glad they are helpful. I only use this for local running about and I have other bikes so it's about 5k miles (I think) - around second service point anyway.

@aabsc Год назад

Someone is insisting there are "guide pins" I need to clean, I can't see any in this video nor in the exploded view of the caliper from KTM, am I right that there are no guide pins other than that bolt that goes through the hole in the pads?

@MotoMirius Год назад

Yes, on the front brake there is only the one guide pin which is the bolt through the middle.

@mageshKumar-gx8kn 2 года назад

Hi Bro is that Trox T30 to displace the brake pads from caliper ?

@MotoMirius 2 года назад

Hi yes, it is

@extremeps4dailyvideos340 2 месяца назад

I can’t seem to compress the pistons on my front brake calliper. Even How hard i press, solitions?

@MotoMirius 2 месяца назад

Need to clean the caliper as there will be dirt and rust on the piston which prevents it from moving back in. I haven't done a video on this bike, but I have on others and they are all the same.

@extremeps4dailyvideos340 2 месяца назад

@@MotoMirius thanks mate

@extremeps4dailyvideos340 2 месяца назад

@@MotoMirius could you tag me or send I link to the videos? I could not find any.

@MultiGuitarman21 2 года назад

Only the caliper bolts is documented in manual to have loctite 204? everything else that needs loctite is 243? are they interchangeable?

@MotoMirius 2 года назад

Threadlockers come in different forms for different purposes - and there are a lot out there. In very basic form they split between 'blue' medium threadlockers such as 243 for non critical fasteners, and 'red' high strength such as 204 which are for critical functions. However, you also need to bear in mind that threadlockers are heat release and brakes get very hot....

@Statek63 2 года назад

@@MotoMirius The red Loctite is more heat-resistant, isn't it ?

@rideyourluck1371 Год назад

Sir where I get the torque settings number of motorcycle ktm Duke ?? Pls help me out I can't find any way

@MotoMirius Год назад

If you do an internet search you can find many examples of torque curves for the Duke. Your question is too vague to answer - what size engine, what mods, what country, what temperature, piggyback ECU etc. The only torque value that matters is the one measured on your bike at a dyno - different dynos will produce slightly different curves depending how well they are set up, what the environment was on the day etc - this is why you are probably finding it hard to find an exact number - if you do find one it will probably be wrong. The only real meaning is as a way of tracking changes you make to your bike on the same dyno with the same operator when the environmental conditions are similar.

@25rava Год назад

hi thanks for your movie.... l have KTM 125 2020 and my front brake squeaking ( not when lm breaking ny when lm rolling) I have pulled out pads clean up caliper and pads (standard pads from new ) and put them back and was ok for around 80 miles then started squeaking again 🙄 l found out one of the pads is thinner then other side if that important. What do you recommend ?

@MotoMirius Год назад

Squeaking is normally from contamination. If the pads are not wearing evenly then the caliper is probably not sliding properly and needs cleaning - but it depends how much - some uneven wear is normal as one pad hits first, so towards the end of life of the pads it would be noticable.

@25rava Год назад

@@MotoMirius thanks :)

@tannermeyer8136 3 года назад

another random question ha, have you ever heard of duke 390’s having any issues with the swing arm bearings? recently ran into some issues with mine and was wondering if it’s common!

@MotoMirius 3 года назад

New one on me. Depends how old yours is though - swing arm and rear shock linkages are amongst the most commonly neglected parts on a bike and can cause issues eventually.

@tannermeyer8136 3 года назад

@@MotoMirius my duke is a 2018 model, thanks again for the help i really appreciate it!

@MotoMirius 3 года назад

@@tannermeyer8136 Shouldn't get issues on a 2018 unless it's done a lot of miles. But its a service items so it should have been spotted before you did. Bearings can fail, but its an easy job to fix.

@malcolmcook4690 3 года назад

Can you please tell me why my 390 makes a wratteling noise when I pull the clutch in 👍

@malcolmcook4690 3 года назад

Is that normal

@MotoMirius 3 года назад

Not normal unless you are riding a Ducati.

@Statek63 2 года назад

@@MotoMirius and that would need to be a Ducati with a dry clutch ;-)

@k.hommik8295 2 года назад

But the pistons did not go back, when you tried. they would not need this much force. My lower ones go in with finger pushing, upper ones dont go in at all like this, just come out when using brake lever. Why?

@MotoMirius 2 года назад

There are a number of factors which dictate how hard it is to push the pistons back. These include the design of the fluid channels inside the calliper, how dirty the pistons are, how large the pistons are, if there is corrosion inside the caliper seal grooves etc. It is normal to need a tool to push the pistons back in.

@k.hommik8295 2 года назад

@@MotoMirius Lower ones went in easy, upper ones i had to push realli equally from surface, just a little tilt and they got stuck. Thx.

@dheerajdeeraj2384 2 года назад

What liquid your using to clean those break pads..

@MotoMirius 2 года назад

You can use soap and water, or as I did, brake cleaner.

@sairohith6794 2 года назад

Hi, I own a duke 250(2019 bs4 Indian model). My motorcycle came with 300mm front disks & standard brake pads, so I never got the sharp braking feedback that duke 200 or 390 offers. 1.What should I do to get the sharp braking feedback should I upgrade to 320mm disk or just change my pads to sintered pads and have the same disk? 2. Right now my brakes doesn't offer any feedback(feels numb) for the first 1.5cms of travel while pulling the lever, after that travel the bike comes to a stop (ridden 6500miles, never replaced pads). 3. Is this a problem with pads, disk or any other issues? Enjoying your content, very informative. Please help me address these issues..

@MotoMirius 2 года назад

320mm disc will improve braking. 2019 probably already has sintered pads - my 2017 'standard' pads are Brembo sintered, but if not then yes, change them. With regards brake feel, make sure that the caliper is thoroughly cleaned of all brake dust off the piston - if the piston has debris on it then it will be tight through the seals and you will lose feel - regular brake cleaning is very important as the most expensive brake systems will not work properly when dirty. Disc and pad upgrade will all help with feel, but if you want race track level of feel then you will need to replace the entire lever and caliper system with an expensive racing level system.

@sairohith6794 2 года назад

@@MotoMirius No my use is mostly in city & occasional rides. I just need the feedback which duke 390 braking system provides. 1. I will surely change the pads & clean the pistons. 2. Making a disk upgrade seems expensive with my pocket money. Let me know if upgrading the disk (after pad upgrade & piston cleaning) is still worth it and will make much difference in my experience, in that case I will do it. 3. Does duke 390 have any other braking system changes apart from the 20mm larger disks than my duke 250? 4. Can you please suggest some good brake pad brands available in India or should I use the stock 390 sintered pads? Thank you for your suggestions..

@MotoMirius 2 года назад

Make sure the brakes are working properly and clean. You have the same braking system as the 390. Check the pads and. Consider upgrading the disk

@MotoMirius 2 года назад

And of course bleed the brakes if you have not done so.

@Tanuj_utube 2 года назад

Hi, 390's sintered pads are a direct fit and work flawlessly on my 250. No need to change the disk and Will cost rs1750 only.

@geoffgreenhalgh3553 3 года назад

I would have used the lever to push the pistons out a bit so you could remove the dirt ring around the piston while the pads were out.

@MotoMirius 3 года назад

Which is what I suggested doing in the video. Depends how often you clean and so forth.

@pradeepkummu1917 11 месяцев назад

👍👍👍👍👍👍

@olivierloulou4213 2 года назад

Bonjour auriez vous les couples de serrage pour la clef dynamométrique svp

@MotoMirius 2 года назад

Salut, oui, ils sont dans la description de la vidéo: Torque settings: Brake caliper bolts 30 Nm

@olivierloulou4213 2 года назад

@@MotoMiriusmerci beaucoup

@dhruvsingh2666 2 года назад

My brake screws are shut tight I mean I can stand and screw won’t open. Help

@MotoMirius 2 года назад

Given the bolts would snap if you applied body weight to them, it sounds like the heads are corroded to the caliper body. This is why it's important to regularly service brakes - the parts can lose their plating easily and corrosion will form. I suggest using a penetrating oil and also heat. Sometimes there is no alternative but to cut the heads off and fit new bolts, but this should be a final resort. Good luck.

@dhruvsingh2666 2 года назад

@@MotoMirius the service where I am is too lousy. They don’t even change fork oil, I had a oil seal burst and they just repaired and TOPPED up the dirty oil. Today just I dismantled whole front, and had to used RE GT650 fork oil. The screws did open with wd40 😅😅. Does duke 250 euro bs4 pull toward left if the wheels weights are gone?? But really thank you for video atleast I knew what was I doing 😇😇

@MotoMirius 2 года назад

@@dhruvsingh2666 Well done! This is how I learnt to do it myself. Wheel weights need to reset each time the tyre is changed or if tyre or rim damaged. If the front wheel is not balanced you may feel additional vibration in the handlebars. So long as you have allowed the forks to bounce before tightening up the forks and wheels it should not pull left or right! :)

@dhruvsingh2666 2 года назад

@@MotoMirius oh that is new I will check it out

@user-ll7iv9gm2q 3 дня назад

En español como se podría traducir 🥺

@MotoMirius 2 дня назад

Si activa los subtítulos, debería tener una opción de traducción automática, que le dará el español.

@andriucha7254 9 месяцев назад

I'm sorry for such a negative comment. It's not for the author. It's for the manufacturer. The quality of the brakes is only a name. Every time you pass a puddle, the brakes stop after a while because the cylinders that have to run are open and they need to be washed and exercised again. This is a real load of crap..😅

@MotoMirius 9 месяцев назад

I have no issues with these brakes in the wet - no change in performance. Sounds like you have an issue to be fixed. I recommend making sure you are running sintered pads (stock for many countries) if you aren't already.

@andriucha7254 9 месяцев назад

@@MotoMirius Hello that's why it's bad because the motorcycle is 2 years old. everything is still original. I will change the repair kit for the next season, maybe I will forget about this problem for a while.thanks for the reply

@MotoMirius 9 месяцев назад

How often have you serviced the brakes? I have owned mine since 2018 and I have never had this problem. @@andriucha7254

@cnrom 3 месяца назад

This is not normal, i have 30000km on my Duke and been riding even in a flood once (caliper covered by water), never had anything like that.