Front End Service Mode - MINI Cooper 2007-2013 R56 R55 R57 R58 

I show how to remove MINI Cooper front bumper and move radiator support / modular front end into service mode. Mod MINI's Tools: amzn.to/2QEMznK Gen 2 MINI Cooper Parts: amzn.to/2A6rygv Mod MINI Tip jar: www.fundly.com/mod-mini-tip-jar See all the Mod MINI Videos on my channel: ru-vid.com

Nice video. Straight to the point. No fluff, no music, no backstory.

This is one of the best service videos I've ever seen. Good video quality, great POV, no music, just very straight forward instructions

I've been gifted an r56 and read all the horror stories, because of them I spent 3+ days trying to avoid putting my mini into front end service mode trying to replace the oil filter housing gasket. After watching this and replicating, I wish I'd done it sooner, thank you for putting such a great tutorial together and showing just how easy it is

Excellent video my man! Really made things clear and easy to understand in a car that's a daunting prospect to service.

Great video. Fast. Informative. To the point. Thanks. I was so excited to see a video that didn't waste time on superfluous things that I did donate to your fundly. Thanks for helping. I'm halfway through a downpipe replacement (hi-flo catted) and I was thinking about service mode and just doing the oil/water housing bracket leak thing while I'm at it.

Excellent video and resource for all mini owners. Thank you!

Great video, I love how you explain things , and honestly your channel an knowledge of mini helped me so much, and now I practically live by mini, but me as the warranty . I noticed you mentioned turbo vs no turbo disassembly, one thing I noticed, when you took off headlights, and I'm not sure if this is model specific or package specific, but some do have headlight sprayers, (just a tiny hose connected to side of headlight ) simple push clip on both sides an pull. They are rarely hard to get off. But yeah just a heads up boss man 🤙 knowledge is power. Also I love how you split this vid from your alternator video. Genius

Nice video. Took all of about 15 min but made a wold of difference accessing the front. Thanks!

This video is so much gold. Thanks Mod Mini

Taking it apart I think I could do, putting it all back together again is another story I think. Scary.

Thanks for this video! I’m about to do the timing service, along with the infamous oil filter housing seal on my Cooper S, and this was super helpful!

Got an exhaust to remove today. This helped massively. Thank you.

This is a great video! What are the torque specs for the filter housing back onto the motor please? I can't find this info anywhere..

Just found your channel thanks the r/MINI reddit channel. I have a 2014 R60 base (Countryman), and there's just a dearth of information on these more complex procedures-- your site is an oasis of information. This is great stuff! Subscribed. In that vein, I'm hoping you have the time to answer a couple of quick questions: - How significant are the differences between this and the R60 Countryman (base)? -I s there a list of torque measurements to reference when putting things back together? I tried finding a service manual for the 2014/R60, but I can't find anything except a PDF on ebay, and it references a bunch of BMW torque codes that don't really tell me ft# or newtons. Thank you again for your hard work in putting these videos together! I hope your channel is paying off!

Thank you for the knowledge and experience.

Usually the radiator seems to be in the way also. Does this make easier access to coolant pipes?

how long do the m8 bolts need to be, if your going to do the clutch?

Wow sir! Awesome!

Man, you’re good. Thank you so much

Thank you so much for this!

hi many thanks for your helpful videos, i have a quick question, i am about to do the timing belt on my wife's 2008 cooper d will i need to put it into front end service mode or will i be able to do the belt change without moving the front? thanks again

Excellent video, ideal when you need to replace the Cat on a non Turbo/s Mini 2007 in the UK....Thank you !

You even included the size of the bolts to hold the front end up🙏

Great video! Do you know if the bonnet and front bumper of a 2008 mini can be put on a 2010 mini? Thanks

Hi buddy great video, I just have one question please - I have a 2010 Cooper s N18 and the front bumper has lower air scoops either side of the number plate, how do I remove these from the car to remove the whole bumper ? Kind regards Jay from the UK

Awesome video again, you know these cars in and out. Quick question I have had my R53 since new, 70,000 km on it I want to start upgrading the car, looking to turn it into a quick road car. With an occasional run on the track I live on Vancouver Island so a pretty similar climate to Seattle, with the pulley upgrade would you recommend a 15% or a 17%, I have read that the 17% will create a bit of heat, will the cool damp air on the coast here be enough along with a cooler plug or would you recommend the 15%? Along with a CAI, header, how much larger injector can I go on the stock map and head? Thanks Colin

Hi do you have any information on how to remove the rally lights on some models?

3m30s in and I understand why that clip was missing, what a pain to remove. 5m20s in and those 3 clips, would have been great if mine were missing. Couldn't remove the pins, the heads just sheared. Eventually prised the clip out with the pin still in, hammered the pin out and will be replacing the pin with stainless hex head M5 machine screws. They'll unscrew or I can get mole grips on them next time.

Nice vide guy very very help full . It helped me at least Ty.

Great video. Saved me a ton of time.

do you recommend this mode for changing manifold/cat , 1.4 mini one, seems to be no room to get in to remove even the heat shield.

Anyone know the torque spec for the 4 subframe bolts?

same for R60 , i have to remplace clutch thanks

Nice one thank you helped out so much

Hi!!! You're awesome Sr. I need some help whit 2008 mini cooper s, I have a p0327 code knock sensor! Do u have one video where I can see how to replace it. Thank you

Great video

I have been working on this MIni cooper s 2009 turbo for a month now I finally got it to run after cylinder head change now is running rough with all cylinders misfiring and smoking while idealing drove it around the block runs rough on low rpm but high rpm's has great power checked compression a;; cylinders hold between 90 and 100 PSI I have a base mini cooper 2009 I swapped coils and cam sensor but nothing changed fyi I have a leak in the exhaust (I don't think this is my issue )??? please advise thanks Mina

I will never complain about the R53 front service mode again.

It is absolutely insane that you have to do this to change the oil filter gasket 😪

Germans. Let's take the most simple car and make it the most complicated.

Would this give me enough space tor emove and replace cat on an r55 non turbo?