Тёмный

Front Nearside Suspension Spring replacement on Ford Focus Mk2 - 2007 (Video 1 of 2) 

Coats and Gaiters
Подписаться 62 тыс.
Просмотров 6 тыс.
50% 1

In this video (169) I replace the Nearside Suspension Spring by removing and stripping the strut down. Offside Spring is here: • Ford Focus Front Offsi...
⬇️💥⬇️ Links Below & Donations ⬇️💥⬇️
PLEASE SEE MY COMMUNITY TAB FOR A PICTURE ON HOW TO CORECTLY ALIGN THE TOP MOUNT TO THE BOTTOM PIN THAT WAS BROUGHT TO MY ATTENTION RECENTLY.
⚡Useful Tools Some Used In This Video
1️⃣ KYB RG3404 Spring 🕔00:12 🚧 amzn.to/3YmUKaV 🚧
2️⃣ Trim Panel Tools 🕔01:24 🚧 amzn.to/3ERtQBe 🚧
3️⃣ Teng Torx Drivers 🕔03:33 🚧 amzn.to/3SKudmJ 🚧
4️⃣ Plus Gas 🕔05:06 🚧 amzn.to/41MySZB 🚧
5️⃣ Dremel 🕔05:21 🚧 amzn.to/3YlYOZ4 🚧
6️⃣ Copper Grease 🕔05:39 🚧 amzn.to/3Zlyf7t 🚧
7️⃣ Teng Hex Keys 🕔07:26 🚧 amzn.to/3y9x0w7 🚧
8️⃣ WD40 🕔10:18 🚧 amzn.to/3KUHjM8 🚧
9️⃣ Magnetic Sweeper 🕔14:38 🚧 amzn.to/3YjMHvx 🚧
🔟 Laser Shock Absorber Kit 🕔14:34 🚧 amzn.to/3kEDEaV 🚧
1️⃣1️⃣ 4.8mm Ball Bearings 🕔15:56 🚧 amzn.to/3JbK9Lu 🚧
1️⃣2️⃣ Silicone Grease 🕔16:11 🚧 amzn.to/3YgRxtn 🚧
1️⃣3️⃣ Laser Spring Compressors 🕔15:56 🚧 amzn.to/41KruxF 🚧
1️⃣4️⃣ Draper Spring Compressors 🕔 18:32 🚧 amzn.to/3YjOmkL 🚧
⚡Coats and Gaiters is a participant of the Amazon Influencer Program.
www.amazon.co.uk/shop/coatsan...
I may earn a small commission with my affiliate links, though the prices paid are no higher but they do help me fund this channel.
⬇️Timecodes
00:06 Introduction
00:53 Removing Wiper Arms
04:36 Cleaning Earth Body Connection
05:44 Removing Road Wheel
06:52 Photographs
07:14 Removing Ant Roll Bar Drop Link
08:35 Photographs
08:50 Remove Hub Bolt
10:49 Remove Turret Bolts
13:20 Parrs Magnet Sweeper
13:57 Photographs
14:13 Fitting New Coil Spring
20:17 Refitting Suspension Strut
24:20 Refitting Road Wheel
25:06 Torque Settings
25:16 Reference Photographs
26:04 Credits
26:30
🎁 Donations to help my Channel Grow 🎁
🎁 Patreon : - - - / coatsandgaiters
🎁 Paypal : - - - www.paypal.com/donate?hosted_...
⚡Other Social Media Links For Coats and Gaiters
1️⃣ Facebook: - - - - - / coatsandgaiters
2️⃣ Main Channel Instagram: - - - - - / coats_and_gaiters
3️⃣ Photography Instagram: - - - - - / coats_and_gaiters_phot...
4️⃣ Tech Instagram: - - - - - / candgtech
5️⃣ Website: - - - - - www.coatsandgaiters.co.uk/
6️⃣ Twitter:- - - - - / coatsandgaiters
📹Some Of The Equipment Used To Create This Video:
1️⃣ Vegas 18 Pro Video Editing Software for the PC
2️⃣ Focusrite Vocaster Two: - - - amzn.to/3WafvGX
3️⃣ Shure SM7B Microphone: - - - amzn.to/3sGEmEW
4️⃣ Panasonic GH5 MK1 Micro 2/3rds Camera's: - - - amzn.to/3SG11LT
5️⃣ Panasonic 12-35mm f2.8 Video Lens: - - - amzn.to/3gGoteI
6️⃣ Panasonic 35-100mm f2.8 Video lens: - - - amzn.to/2Nts3Kv
7️⃣ Panasonic Leica 12mm F1.4 Lens: - - - amzn.to/3NuFoNX
8️⃣ Panasonic 15mm f1.7 Lens: - - - amzn.to/2Zi5OK8
9️⃣ Panasonic 25mm f1.4 Lens: - - - amzn.to/3SJ9uxR
🔟 Rode Videomic Pro Plus Microphones: - - - amzn.to/3U4qOhZ
1️⃣1️⃣ Pixapro 1500s LED Lighting Panels: - - - amzn.to/2N5RTV5
1️⃣2️⃣ Manfrotto 546B Tripods: - - - amzn.to/3rShXlv
1️⃣3️⃣ Konova K2, K7 Sliders (the early models with motors and flywheels)
1️⃣4️⃣ DataVideo TP-500 Teleprompter: - - - amzn.to/3KX8y98
1️⃣5️⃣ Rode VideoMic NTG for Boom Situations: - - - amzn.to/3ESeyvS
Disclaimer:
This video only contains tips and my personal methods that could be helpful when carrying out home car repairs or replacing parts. Coats & Gaiters is not liable for any harm, injury or property damage incurred while carrying out such repairs or replacements, that are a result of incorrect use or misinterpretation of the provided information. This video is for informational purposes only and does not guarantee achievement of a specific result. The user is personally liable for incorrect use of repair equipment, tools or car parts, in particular, when this use poses the risk of injury. Coats & Gaiters strongly advises taking personal care and adhering to all safety rules when doing any repair or replacement. The use on inferior or low quality vehicle parts does not guarantee the proper level of road safety.
This video may also apply to the:
#ford #fordfocus #suspension

Авто/Мото

Опубликовано:

 

2 мар 2023

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 47   
@CoatsandGaiters
@CoatsandGaiters Год назад
If you click "SHOW MORE" in the description above your be able to see Links to the Tools 🔧🔨🔧 I use. Also Clickable Chapters📋 📙 throughout the video and other Links 🎬 that may be of interest. I've had a few viewers request where they can buy the tools they see in some of my videos but it's not very clear that the "SHOW MORE" tab has a lot of information in that may be of interest. Admittedly the amazon links are associated with me and I would earn a small commission which helps towards keeping the channel funded.
@bobjenkins8558
@bobjenkins8558 5 месяцев назад
Probably most detailed video’s I’ve seen 👍🏻.
@CoatsandGaiters
@CoatsandGaiters 5 месяцев назад
Thank you
@mullraerae299
@mullraerae299 Год назад
You don't need to remove wiper blades, you can access the nuts by just lifting front of plastic panel after all clips and torx screws arev removed.
@CoatsandGaiters
@CoatsandGaiters Год назад
Thank you, I was just going by the Haynes manual.
@AlanL200Truckman
@AlanL200Truckman Год назад
Morning Mark #freddyfocus content in full swing As always informative & interesting, and very in depth. The engine bay looks very clean despite #freddyfocus being abandoned..... Which PLEASES my OCD for all things clean very much. I've just replaced the rear spring top/bottom anti squeak mounts on my MK7 Fiesta today. Look forward to seeing you transform #freddyfocus in your methodical & in depth manner that you take in all video's. Keep up the good work Mark As always, thank you for taking the time to post these video's for us, the captions you add I find very useful. Stay lucky. Stay safe. Stay healthy. Alan L200
@CoatsandGaiters
@CoatsandGaiters Год назад
#freddyfocus is coming along ......sort of haha. I'm so slow to record, edit etc I was hoping freddy might have been for an MOT by now.
@jasonmassey805
@jasonmassey805 Год назад
Glad the info helped Mark that earth cable definitely looked cleaner when you finished.
@CoatsandGaiters
@CoatsandGaiters Год назад
Thank you for pointing it out as clearly it could have caused me a right headache later on. Doubt I would have thought to check it if the car stopped running.
@jasonmassey805
@jasonmassey805 Год назад
@Coats and Gaiters no problem anything else I can help with feel free to ask
@CoatsandGaiters
@CoatsandGaiters Год назад
@@jasonmassey805 Thank you
@volitangelo
@volitangelo 3 месяца назад
Thank you sir
@CoatsandGaiters
@CoatsandGaiters 3 месяца назад
Hope it helped
@louisronan5903
@louisronan5903 6 месяцев назад
Good video pal but you can get by without taking the wipers off. There’s plenty of room for ratchet without removing the top panel. Just undo the screw at each end and you can just bend it out of the way enough to get access to the bolts. Just pop out the bottom section of that plastic panel and top part bend enough to get by. 👍
@CoatsandGaiters
@CoatsandGaiters 6 месяцев назад
Thank you for the comment. They do go through a few springs don't they.
@louisronan5903
@louisronan5903 6 месяцев назад
@@CoatsandGaiters : Haha yes mate.
@terryread1970
@terryread1970 6 дней назад
I’ve just got 2 shocks for my Mark2 06plate Ford focus part number 1919323 didn’t come with the nut that attaches to the top mount please can someone tell me the part number for the nut?
@lovepreetsinghhanjra1997
@lovepreetsinghhanjra1997 Год назад
👍🏻👍🏻
@CoatsandGaiters
@CoatsandGaiters Год назад
Thank you
@Danidasanic
@Danidasanic 4 месяца назад
Great video , I love to do things right and this video will definitely help , I just don't understand what do you mean with "suspension brace to bulkhead nuts (torque value)" . where those are ?
@CoatsandGaiters
@CoatsandGaiters 4 месяца назад
Thank you. Can you give me a time code for that part please so I can watch the part you mean.
@Danidasanic
@Danidasanic 4 месяца назад
@@CoatsandGaiters right at the end when you share the torque value @25:10
@Danidasanic
@Danidasanic 2 месяца назад
​​@@CoatsandGaitersDid you checked the "suspension brace to bulkhead" and the "susp. Strut upper mount/brace to body" thing ?
@CoatsandGaiters
@CoatsandGaiters 2 месяца назад
@@Danidasanic No I don't think so? should I?
@Danidasanic
@Danidasanic 2 месяца назад
​@@CoatsandGaitersIm talking about that 2 torque values (see my first comment) .
@terry.chootiyaa
@terry.chootiyaa Год назад
*Another useful video thanks 👍👏*
@CoatsandGaiters
@CoatsandGaiters Год назад
Thank you Terry
@dietmarsaito1275
@dietmarsaito1275 Год назад
Noticed the Halfords Modular tool trays, I would be interested in knowing whether the tool cabinets are also from Halfords and if so which one? Do you rate them? Loving the detail in your videos BTW.
@CoatsandGaiters
@CoatsandGaiters Год назад
Hi they are the standard Halfords Advanced range. Think they only do red the cheaper ones and the black the advanced ones. I have found them to be tough and reliable. They normally do an offer sometimes and you can get them cheap. I think I bought mine just before Christmas on a 1 day deal thing they offered. Don't pay full RRP as often they can be had for nearly half price.
@dietmarsaito1275
@dietmarsaito1275 Год назад
@@CoatsandGaiters Thank you for the responce, always been happy with Halfords. Might not be the cheapest (Sensibly Priced) but quality of there own products very good. Staff and Customer service excellent. My 150 pc tool set from over 20yrs still good (a few items missing but still have the 10mm's).
@AlanL200Truckman
@AlanL200Truckman Год назад
​@@dietmarsaito1275Great bits of kit, all the Halfords Advanced gear. I've got all their modular sets & black stacking tool box, cabinets, draw units etc & have never ad any issues with any of it. As with all my tools as they're in the shed all year round, I spray everything with WD40 twice yearly to keep any rust away, which works excellently. I can also vouch for the Halfords replacement guarantee...... Absolutely fantastic. I've used it twice & as they say they just replaced the items with brand new, also you do not require your receipt for the replacement process. As I said earlier, GREAT BITS OF KIT.
@CoatsandGaiters
@CoatsandGaiters Год назад
@@dietmarsaito1275 All my sockets etc are Halfords and a lot go back to 1995. Think I had one breaker bar snap but I was overloading it and they replaced it. I think Halfords/Sealey etc tend to all be the same.
@CoatsandGaiters
@CoatsandGaiters Год назад
@@AlanL200Truckman I totally agree Alan. The Halfords stuff is great quality at a reasonable price. Most of my sockets are Halfords.
@davyboy888
@davyboy888 Год назад
@19:33 you didn't mention anything about the position of the strut mount top bearing and the top of the coil spring. That does have to be correctly positioned for the spring to be correctly aligned. I'm trying to do this now and unsure about exactly where it should go. The second thing is that Ford produce 8 different versions of the coil spring all with different painted colours. Mine arer red brown blue which denotes the handling pack but with the exception of Febi [who produce two versions] all other manufacturers only seem to issue one spring for these vehicles. Another dilemma - £140 for a Ford spring or £20 for anything else ??!!??
@CoatsandGaiters
@CoatsandGaiters Год назад
Your quite right about the alignment. Someone else mentioned this so I added a bit on it on my COMMUNITY tab with a picture. I went with just an after market spring as I paid £250 for the car.
@davyboy888
@davyboy888 Год назад
@@CoatsandGaiters That's a really helpful photo... haven't seen that before. Thanks so much.
@CoatsandGaiters
@CoatsandGaiters Год назад
@@davyboy888 I had to adjust mine with it on the car, wasn't easy. I think the spring can rub the chassis if not correctly aligned.
@davyboy888
@davyboy888 Год назад
@@CoatsandGaiters One other thing... did you apply grease [or copper slip] to the bottom of the damper when you inserted it into the mounting ?
@henrymcdonald6173
@henrymcdonald6173 6 месяцев назад
Should have put a new top mount on it
@lucase3047
@lucase3047 10 месяцев назад
The quality of these ford focus cars is so abysmally low. A 2010 model on average have such big rust on the body. Shocking low quality cars.
@CoatsandGaiters
@CoatsandGaiters 10 месяцев назад
Cheap parts though lol
@MonoLucas123
@MonoLucas123 10 месяцев назад
@@CoatsandGaiters rust repair isnt parts. Just very disappointed with Ford.
@CoatsandGaiters
@CoatsandGaiters 10 месяцев назад
Very true. Metal is really thin with no protection. @@MonoLucas123
@henrymcdonald6173
@henrymcdonald6173 6 месяцев назад
All cars rust @lucase
@MonoLucas123
@MonoLucas123 6 месяцев назад
@@henrymcdonald6173 no shit sherlock, but there is a rather big difference in how fast rust can advance depending on the build quality of a car. Such as coatings, material quality or even structure. The ford and mazdas 6 of that age have poor construction. Where moisture stays within the cracks and sheets, no drainage etc and bad coating. I have several other cars of a lot older age which dont even have a quarter of the rust these have despite being daily's in a wet climate
Далее
Ford Focus Mk3 Front Suspension Spring Replacement
42:07
How to Replace Rear Coil Spring 00-08 Ford Focus
11:31
Ford Focus mk2 Front Spring Replacement (How To)
21:54
Просмотров 135 тыс.
Replacing a rear spring on a ford focus mk2
11:55
Просмотров 109 тыс.
Мальчик стал гонщиком в 5 лет
0:14
Фишки FORD F-150. Часть 2
0:54
Просмотров 3,1 млн