Front Wheel Painting | WHEEL / DISC - Removal AND Assembly | CBR250R 2013 - NO ABS

Подписаться 1,2 тыс.

50% 1

www.cbr250.net/threads/the-it...
0:00 Start
0:04 WARNING
0:10 Removing the WHEEL
5:09 Removing the DISC
6:24 Preparing For Painting: Degreasing
8:04 Preparing For Painting: Wheel Masking
10:28 Preparing For Painting: Tire Masking
13:27 Preparing For Painting: Fine Sanding
15:30 Safety rules: Ventilation, & Face Mask
15:51 Painting : Gray Filler Primer - TWO layer
17:48 Painting : Mustard color - code E1412 - Matte finish TWO layers
19:44 Painting: Metallic varnish - One layer
20:22 Painting: Matt varnish - TWO layer
20:55 Removing the masks
24:53 Painting The Disk Screw Heads
26:08 Installing A New Disk
27:19 Wheel Balance Check
29:31 Wheel Assembly
35:09 Credits

Авто/Мото

Опубликовано:

3 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 8

@tilorauch753 Год назад

Das Rad hätte ich mit Bremsenreiniger eingesprüht und dann abgekärchert. ABER Tip Top Arbeit 👍Wie immer😂

@mycbr250rdmotorcycling7 Год назад

Yes and THANKS👍 By the way, now, with my new paint, I have to be careful with brake cleaner. Next time I will paint with 2K and not 1K. 2K is a two-component paint that is stronger and more durable. The disadvantage is that the working time with it is short. The sprayer in which the safety pin was applied must be used within 24 hours.

@Timbhu Год назад

I believe you would have greatly benefitted by having your wheel on it's axle and suspended while painting. You would have got even coverage as the wheel can be spun freely allowing you to just spray and hold the can on the spot

@mycbr250rdmotorcycling7 Год назад

As someone who is inexperienced, I improved the technique as long I worked. Painting while rotating would have given a better and more accurate result. On the other hand, painting the "spokes" while rotating would have wasted a lot of paint. The geometry of the "spokes" ,and center wheel, with all the internal spaces and holes, on both sides, makes that painting job to be very difficult. [There are rims that are easier to paint]

@Timbhu Год назад

@@mycbr250rdmotorcycling7 thank you for response. Did you paint the interior of the center Hub?

@mycbr250rdmotorcycling7 Год назад

@@Timbhu Yes 22:45

@mycbr250rdmotorcycling7 Год назад

@@Timbhu From the outside (I did not touch the interior), look at: 19:09