FSLTL Settings Guide | Microsoft Flight Simulator 

Hey Q8Pilot - thanks for showing our product and your suggested configuration. As the dev of the FSLTL injector I'd like to just point out a couple of things that were not quite right. The 'Max Radius to inject Ground Aircraft' - this only affects the IFR injected traffic distance not the additional aircraft distance. This will mean with 150km set in busy airspace you will be injecting IFR traffic at all the surrounding airports. So with your KLAX example that could see a significant number of extra aircraft on the ground at other airports like KBUR, KSNA etc. In addition the 'Absolute Max Airline Parked' setting only impacts the static parked aircraft, not the IFR aircraft - so won't limit those aircraft on the ground that are true IFR aircraft. I suspect that is why you see a bigger drop at KLAX. With respect to Additional Parked Airline aircraft, a setting of 10 is equal to 50% (as opposed to 100% as noted in the video) of the overall suitable parking spaces with radius greater than 10m. The in air radius definitely won't have a direct impact on performance, other than potentially reducing the number of aircraft in the air if airspace isn't that busy. In KLAX region 100km or 150km air radius will often have the same performance impact as you will still hit your overall IFR limit if its prime flying time. (You would be able to see that from the IFR counter displayed in the console window) Personally I fly with 150km air and 30km ground radius - which for me gives the better experience. Final note is with respect to VFR traffic - VFR in FSLTL is an aircraft that has not origin or destination in FR24, or just one of them - i.e. we don't know the start and end point. In KLAX region you will see plenty of these flying if you monitor them on little nav map. We would definitely advise anyone to also review the user guide so they can read what each setting does in detail... www.fslivetrafficliveries.com/user-guide/

Another amazing guide. Super helpful my dude. You're a star

The old intro! I like this the most.

I'm not sure I agree that the performance you were experiencing was "good". In my mind, good performance in a simulator means smooth performance which equates to consistent frametimes across all loading scenarios (FL 350 or on the ground at a busy airport). Dropping from 64 fps to 44 fps during takeoff roll necessitates changes in frametimes which the eye experiences as stutters. Instead a better approach is to aim for a consistent frametime through frame rate limitation. Just my 2 cents.

Over 60 fps at New York is a dream, i just got the 14900k ,64 gb ram @ 6400 Mhz, and 4 Tb Crucial T700. Currently with rtx 3090 ftw3 Ultra, waiting for new gpu other than 4090.

Unbeliavable how even the strongest cpu+gpu combo can’t push 30 fps stable without frame generation/dlss at 4k at max settings

Very useful ! Thank you Q8 !!

It would be crazy to follow your setting as you are using a RTX 4090. I guess this video is for the rich simmers with the very top end PC setup

Good video! I wish I could get the frame rates that you do. I have an I-9 processor with 32 gigs of RAM and the RTX 3080 card. I run either dx11 or dx12 and I have everything at Ultra. I'm lucky to get 35 to 40 frames per second and with FS LTL at the larger airports I will get some stuttering and a definite big-hitting framerate. But I do love fsltl. Thanks for explaining the settings a little bit more detailed. I will play around with them.

Thanks for the guide!

Thanks a lot for the video!

hey man sick vid first of all secound of all i would love to ask are you using dlss 3 or fram gen and thanks for the vid

Lag and stutter… if you don’t get it when you begin… but it shows up later in your flight, or when landing… Delete your rolling cache files in the general options, data... Frame rates go down because there is a bottle neck holding up the processor. Almost always… cache files. Also check your video card. They are saved in there. Change settings in the video card card settings for larger cache file to prevent overflow. Standard is 1 gig. Make it at least 10 gig. Mine is 100. No more stutters at maximum settings.if frame rates are good when you start up the sim… should be good the entire flight.

I finally figured out what was really causing stutter and crashing my system after flying a little while. Check your Catche… delete it. In the sim, and and in the video card settings.

Hi Q8Pilot - a great video again thanks. Not sure why FSLTL has become such an FPS killer very recently. I have an i9 32GB Ram and RTX 2080 Super. At the freeware EGKK using FS Traffic with a setting of 20 flights per hour (so fairly full) I get an average FPS of 41. When I switch to FSLTL using a similar traffic load and using FS Traffic models as priority my FPS drops down to about 25 and stutters. I note that with FS Traffic I get a good balance between GPU and CPU however now with FSLTL I get constant red and solid limited by mainthread. Any ideas if something has changed with FSLTL?

Thank you very much for the video sir

Thank you for demonstrating the product because I always use it now! It definitely was worth getting and is surprisingly very good as it's freeware and is even better than some other pay ware A.I Traffic addons.

that's 20 fps impact in LAX considering you are starting your flight at the runway and not at the gate like most people

for me, the two worst thinks about msfs are the ai traffic and atc. i’m really keen to find good ways to improve both. GA is very important to me though, so i’m not sure this helps.

By the way, was frame generation enabled here? It may be relevant for performance

thanks for the update and video.........

Thanks for the video Q8. Could you please give me suggestion about the ATC addon you are using? Are you using default ATC of MSFS or another addon?

Great video as always.. By the way, what's the name of the app on your screen showing the fps and the cpu usage?

THANK YOU!

I would think that the maximum radius to inject ground aircraft would cause other nearby airports' ground traffic to appear when you don't really need it to. I set mine for the radius of the airport something like 3 miles.

Hello sir, i've heard that it possible to set textures in fsltl in 2K, how to do that ? Apprently, the textures files in fsltl traffic base in community decrease from 40go to 9 go ! do you know how to set that ?

My game hardly gets 25 fps with no planes on the ground what so ever and i have a relatively decent pc nothing i do in graphics setting make a different i can turn everything low as possible and still lag and idk what to do and it’s frustrating

i’m struggling as when I land at a fairly busy single runway airport using fsltl I have to go around like 3-4 times before I can land due to everytime i’m on final a new plane enters the runway

Hello, thanks for the video. I also installed it, however, I have noticed there are basically no 747 models at the (big) airports, just saw one from a parcel carrier at OMDB but none at other big airports. Is there a problem with or what am I doing wrong? I noticed I also did not see any in your video of JFK. Thanks for your help!

Hello Q8 sir, i know this is a 2 month old video. But i was wondering if you can advise me if i should buy FS Traffic? Or FSLTL does a great AI traffic job already? What make FS traffic better that it'd cost 30$, sir?

What happens if you speed simulation time in air?? does it affect other airplanes? How do they behave if they're direct mirror of Flightradar24? thanks!

What are you using to display the data in the top left for frames etc?

I am having problems with AI Sounds in external view. It constanly sounds like I am getting blasted by 1000 jet engines. How can I solve this

Hi Q8. Where is that FPS counter you have in the upper left corner of the screen? It doesn't come with FSLL?

Hello, I have a good computer and antilising and anisitropic am maximum, but the airport buildings flicker and it has a strange effect, does this happen to you? how can i solve? It also happens with objects.

I have the airplanes showing but no liveries on them, there just with basic msfs colors,

Great video!

Hi, Why does your GPU doesn't go full 100% load for max frames. I have the same problem on busy airports and scenery my GPU will backtrottling. Less processingpower of the GPU for more scenery will result in massive framedrops, just at the paces you need it the most. My CPU only uses around 40% Temps, Power internet speed and 32GB Ram and all on SSD wouldn't been a problem.

I noticed you were not using Frame Generation. Any reason for that?

Hi Q8! Maybe the question is a bit off topic, does Fs traffic have the same new features that FSLTL? GA, Dynamic sid etc etc? And Fs traffic have the model matching in Vatsim like FSLTL? Thanks!

Hello Sir, just a question..have you ever been to or flown in the sim to the island of Socotra?

Ihave some kind of problem with this addon: I realized that during the flight, when I see the dashboard of the FSLTL, there is the message: " REMOVED AS OUT OF RANGE" or " REMOVED AS OUT OF RANGE BEHIND"... I do not know what I can do...

Hi Q8 can I ask why I don’t have the real liveries on traffics?

Thank you very much for your video and your experience. I appreciate this a lot. I have the same power pc like you, but on Kennedy Airport I get just 35 fps (with FSLTL and same settings like you). No idea why you get so much smoother frames. 🤔 I already delete Nvidia shaders and things like that. I thought this Airport is really a fps-Killer, even you have a power pc, but now I see your amazing fps. Any idea what I still could do or change ? Your Chanel is great 👍 happy flighing

What tool do you use for the FPS/GPU overlay?

Some aircrafts just dont take off, they freeze on the runway and disappear after the time we set, is there a way to fix it ?

Capitán, podrías actualizar el video, ya que hay nuevas versiones del inyector que trae nuevas líneas para configurar ?

Does FSLTL traffic have a touchdown effect when landing?

Hello Q8Pilot. Thanks for the video. I'm having an issue with getting aircraft to show up. When I hit start the box comes up, I put N as I don't want to make any changes to the above settings, it connects to MSFS, but the only line I get is KJFK using max 40 additional parked aircraft, nothing else. When I go to the sim, I may get a few vehicles but no aircraft. My settings are as follows, 90, 0, 3, 0, 100, 150, 180, yes,yes,yes,no, no, FS traffic will be prioritized. Any suggestions, Thanks Robert

As recommended I created an API key. Do I only have to do this once or every time I start the injector?

I run a 4080 in DX12 with frame generation in 2k. Noticing you get great fps (I do as well) at the departing airport. When I get to the arrival airport the FPS plummets. Load back in and fps is back to normal. Does this happen to you?

my i9-9900K cant cope with these settings, have to lower it way way way down

hi Q8 Pilot how do you get this small tool in upper left corner to meassure the FPS is is extra tool ?

Do you like this better than the fly by wire one?

But soon as i get the wheels off the ground the game plays perfect 🤷‍♂️

So, do you personally prefer MS, or X Plane?

I keep my fps capped to 62 with my 4090 and 7800x3d. Unforutatly getting a bit worse performance then you as my fps does dip with the 737 at kjfk with the same fsltl settings as you around 50-60 fps instead of 70-80 fps like you

What tool are you using for you FPS?

I hear that fstl uses flightradar24. Do you have to link that somewhere.

Do you live in Kuwait؟

What is flightplandatabase API ?

SUMMARY: Spend literally 3.000$ just in a 4090 + 64GB RAM + 13th gen i9 and you'll be able to get 60 fps in MSFS with FSLTL 🔥🔥🔥

RTX 4090 hardly a typical setup!

What does FSLTL mean?

why you show so much garbage in front..

احد عربي يشرح لي ياشباب ولا لازم اعيش في تكساس ههههه