FSX / P3D Early Access First Impressions Review - Just Flight Traffic Global 

Hey man, am having problems with the traffic at night (texture) and also say that I have to close the fax es because it ran out of memory

I had to chuckle when I saw the cargo plane at the terminal at 2:55

I followed your video like three times when i first installed the traffic i put it under i:programfiles/ which fsx is the same folder its in. And the next was i did my defualt c drive

Doing exactly as you did when compiling i have the msg DATABASE LOG NOT READY in a white box i dunno what to do different...and on the homepage there is 0 Number of A.I Aircraft..i have the latest version

Is your d drive you replaced is that where your flight sim is located

But i watched your video i followed everything why isnt anything showing up in my flight sim can you please tell me

I complied the traffic i see traffic global under add or delete scenery i opended up fsx i dont see any ai planes at all

Novawing24 do you know if the program changes the active runways? On an earlier edition where they also included voice packs for different parts of the world in FS2002 it would permanently change runway direction for some airports and since I fly out of KMSP so much it changed it from Runway 04 to Runway 30L and Runway 30R which made it far more realistic. Is it possible to permanently change an airports actives so right from start-up it's where you want it? Recently I was able to change the active at KMSP from Runway 04 to Runway 12L and Runway 12R but I have to change the weather station for every flight to point the wind at 120 degrees and as the day progresses I've noticed it go back to Runway 04 even though I've made no change. A pain but I'd rather have Runway 12L and Runway 12R active than Runway 04 where all the departures and landings create major lines and to aircraft begin disappearing. Any thoughts?

Does Traffic Global start with the flight sim, or do you have to open it prior to your flight sim and min imize it like other programs?

Hi! Can I please see the ERJ-135/45 close up please? :)

Great video novawing24.Ive currently just bought this addon,version 1.1.1.2. for FSX.and im having a problem,when i go onto the compile traffic screen,there is no grey compile button available at all..any ideas???..some traffic is appearing but not moving.

Could you add the planes to your aircraft selection and fly them? I remember their older AI Traffic addon, Traffic 360 you could fly the AI planes by going to the application and just add in the planes you want to fly from the application.

I used your way of installing. Although I don't need to as I have the latest version now. So I believe it just compiles them straight in. I am frustrated though at the lack of traffic sometimes. I just hope they eventually finish this as it's still early release

It says data base log not ready for the error

Nice video, I might have missed it in your commentary but does it interact with default ATC? Does default P3D ATC actually control them (talks to them) or do they just move about the airport on their own? Thanks

After months of posting on the UTLive tech forums, finally I was to told to re install SIMCONNECT to make UTLive work with FSXSE.....

Hey Novawing24, do we need an active wifi/internet to get the traffic going like ultimate traffic 2??????

One I have ran Traffic Global and created a database do I require to run Traffic Global each time I start P3D?

Will you be doing another review of the finished version once it's complete?

Hi, just purchased and installed Traffic Global, but I have a problem: When I'm using addon airports, the aircraft won't show up at the correct parking positions, is there any way to fix that? And is there any reason why I just have a few widebody aircrafts at the big airports, like MUC and AMS? The AI Settings are at 100% Any help appreciated! :)

When I'm at KDEN at the C concourse there is no southwest planes how do I fix that?

im having a problem getting them to work i did what u done but it still not showing AI doesnt matter what way i set the settings up next time can you show us what to do with the traffic AI window do we clsoe it then launch the sim or keep it running then launch it cuz every time i try closing it and re opeing it and launch the sim i have to compile them again that bit is annoying since you skipped it to the sim instead. can you help anyway ?

Hello! Do aircraft follow a STAR / SID profile at airports?

I went to compile traffic it then brought up a command prompt box empty then it gave me error saying could not complete and the compile traffic box was empty

I like AI traffic ! It's no fun with out it. I usually cranck that setting up to all.

Can you kick out AI aircraft from particular gate or stand?

Hey guys. I just got this and I did comple traffic, but no traffic is there when I open FSX? Don’t know what to do ..

What about FPS cost ?

Can i run traffic global with ultimate traffic live ? Because when i did i only saw UTL aircraft in my game 😥

i brought it thanks for the install part of vid mate

How do you more airliners to fly? Most of the airliners are static, and I get more GA traffic than airliner traffic that I get no congestion at the airports.

the one issue i have is with fs dream team yvr the aircraft dont line up properly normal?

Having Problem whit the program when i compile my traffic it give me just in time error in P3D v5.1.H2

I cant seem to see the traffic in my sim.. any idea

My fsx is in a different folder (i) it told me to install it to c folder not in the sim is this ok

when i run the installer..it says "An error occurred in the script on this page".. Any idea? In your installtion..right before it asked the mail id and password..I am having this error. after i enter mail id and passowrd..nothing happens when i click activate

Does this require the old traffic 360 or can I just by this and it works ?

So my custom folder would be my defualt drive drive c right

Just bought this addon but can't seem to implement it to my FSX. it brings up this: ** FSX: Steam ** Unable to add Aircraft Fleet to FSX.CFG Scenery Library updated with Airport Facilities C:\ProgramData\Microsoft\FSX\Scenery.CFG Added default traffic database files to FSX: Steam Edition Disabling default traffic file: Steam Edition SOUND_LOD entry updated Complete at the setup wizard

Do i need to to uninstall traffic 360 in order for for traffic global to work

i know this vid was last year so is this worth getting??

I'm surprised they are still going to support Flight SIm World. I guess that's good news for the people that bought it, and it's addons, before it was removed from the market in May.

Nice

So true... Air Traffic + GSX makes it worth flying... so you don't end up landing or departing from 100% empty ghost town like empty airports... :-P

I agree UTLive is the wrong name for the program, very mis-leading.

How about GA traffic?

Any help? After starting FSX SE I get an error code saying (UT live does not have a valid registration licence)

I use ai traffic all the time in fsx,p3d & xplane. But Most youtubers and people dont use it due to the frame rate hit, and all they are just chasing the fps and boasting about it.

The kind of stuff that should come with the sim :/

Doesn’t work on my boxed FSX. I click on the desktop Global app and nothing happens. I mean, nothing happens. What a POS program. Spent 6 hours trying to figure out wtf was going on. Uninstalled/reinstalled about 6 times. Nada. All I wanted was up to date AI. (I’m currently using Traffic X. Northwest and others are long gone but they’re in my sim) And trying to access their forums was a waste. Couldn’t get on.

This is way better on xplane 11 than FSX my opinion tho

I've been flight simming for many years, and I suppose, like many others, I've run into problems with installations, and it seems that these get more and more difficult as the years go by. I very much wanted a good AI package, and looked for a review/tutorial on the AI Global. This review looked promising, but....after ten minutes I decided it was reviewed by a techy nerd purely for techy nerds! After the first five or ten minutes of the initial install process, I lost the will to live!! Too much erm'ing and ah'ing, mousing all of the place, and communication coming at 90 miles an hour, I did not have a clue about what was going on. I'm still trying to figure out if this was a review of the product or a tutorial. The review element probably lasted no more than three or minutes at most, and the tutorial was just about as garbled as it could get.Why don't you guys think ahead?; you might know what you're burbling about, about not (I'm fairly sure) the many viewers who want to understand the intricacies of what is necessary. This review has done more to put me off than entice me to purchase. Fifty-odd minutes, and I understood less than ten per cent! What a complete and utter waste of an hour. It's a ten-fold thumbs down from me, which is a great pity.

Good info but OMG! can you ramble on and on and on!!!!

Slow down mate...lol

You talk too much things that are not important would be great if u can just go straight the point !

cant get nothing from this, you talk to fast, glad it works for u, dont work for me, going back to live traffic from f1