Full Sheet Water Slide Tumbler Tutorial 

Here's a fun waterslide tutorial you might be interested in as well. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-KXrbRWthxYU.html

Thanks for the awesome tutorial. Watched it several times and was all set and ready to go and BAM I bought BLACK Plastidip! DOH!!!

Omg the way you manhandled that waterslide is amazing. I barely pull it and it cracks. Guess I need the plastidip

Thank you. Never seen a curve su successfully wrapped before

Thank you so much for explaining and showing the flaws. Love the video and Thank you once again.

reinforcement...repeat..I appreciated this again. I look forward to round#2.

Thank you for giving me renewed hope of working with waterslide

It looks amazing 😉 Thank you!!!

Your a brave women!! I would have ripped it at the turn! 🥴 Nice job!

God bless you! Cause I have been trying to do water slide and have had no luck.

I just have to say I am mind blown right now of how much you were able to stretch that!!! I need to try the plastidip!

As usual another amazing tutorial and you always make it look so EASY! I love this and will add to my todo list. Thank you!

This was amazing. Thank you.

wat size to cover full 18.5oz tumbler

Do you have a picture tutorial? I have a fried that wants me to put pictures of her grandkids on a cup. Just unsure of how you put them on without them looking choppy or well I don’t know how to explain myself. Just don’t want it to look like they just got stuck on there. Well anyway you are a phenomenal teacher! I love your work and thank you again for another great tutorial.

I love love love your tutorial. I was looking for the other video with this video when you were going to add the glitter. I’m not able to locate it🥺🥺. Also do you have a tutorial on cutting overlay. Holy cow that was amazing. Is that how you would do all overlay’s. Put your measuring tape in the middle and cut straight down. That was beautiful how it matched up. Thank you so very much. You’re amazing 🤗🤗🤗🤗🤗

I'm sorry I was never able to come back with that surprise glitter part two on this tumbler as at the time I was having camera technical difficulties.

oh that is a towel isn't it? might wanna try a thick rubber mat..I work with vinyl and it works much better.

Can you tell me if you can do a waterslide to the top of a hydroflask and what would be the trick?? You make it looks so easy

Me too 🥰

Love your tutorial

Where did you get this water slide paper it’s Gorgeous

I'm a fan of your work!...... and I watch your videos over and over when I need help with things and I wait not so patiently for you to upload a new video on YT every week ....lol!!. Thank you for sharing and helping out us new tumbler makers. I have a question tho.....I am struggling with getting an image on a rounded 14 oz coffee mug (from Stainless Steel Depot). I found this really cute image and thought instead of a waterslide (clear-you wouldn't see the image anyway because the cup is blue and glittered) I thought I would print my image on sticker paper. I sealed it with clear spray paint 3 times ( I have an inkjet), cut it out and applied it. I could not get it to lay flat on the front of the mug. DISASTER. So then I thought I would try a white waterslide, sealed then sprayed with Plasti Dip. I thought this surely would work. Well I did a full sheet, cut out the image, sealed it 3 times then sprayed with Plasti Dip, waited about 4 hours then applied it. The edges curled up on my waterslide and I couldn't get them to lay flat. I am so mad. I see all these beautiful cups and I know I can do this, but whenever I try, it's a failure. :( My one thought was after I cut out the image, should I seal the sides and then Plasti Dip the sides too?? I was hoping that you could do a tutorial using images on a rounded ( for the lack of a better word) surface?? I'm posting this here because this was the video I remembered of you using Plasti Dip and getting the image to stretch. I did get the image to somewhat flatten out but the edges are a pain in the .... Please help. Thanks!

Great tutorial

Very cool, but love the results....ty

Omg thanks for this!!

size of paper print out for 18.5oz tumbler

Love this videos can u help me I have a sticker paper I want to use as a wrap but cricut won’t let me print to cut full sheet can u help

Question can you use any kind of clear coat or does it have to be a certain kind with ink jet? I’m really New to this and my image fell apart in my hands 🤣🤣🤣 ink went everywhere

Do you have to use matte clear enamel or can you use glossy clear?

I just came across your channel. Did you ever do pt2 of this? I really wanted to see it with the glitter.

​ Hi everyone, can I get some help? :/ I am having massive printing issues. My printer leaves scratch marks all the time and sometimes the print is totally unusable. My printer back feed uses wheels that make contact with the ink on the paper and leave marks, and my front feed keeps bumping into curved or elevated surfaces on the paper, scratching the ink. Does anyone know how this can be solved? Many thanks in advance :)

😩 I need some of your patience lol

Where did you get your image (glitter ombré into marble)? I love it

What do u use at the end to make the cup shinny and last a long time, and after u spray the tumbler is there anything else u use to prep the tumbler for the waterslide

Is there a special waterslide you used I did the same thing I waited 30 mins between each coat did 3 coats of each and let dry 24 plus hours and it tore? Please help!!

I absolutely LOVE your tutorials!! I'm always anxiously waiting the next one! I'm trying to accomplish a full wrap on a 30 oz modern curve and it's kicking my rear!! It's for my dad and I want it to be as perfect as possible (as with all my cups) I wonder if you can tell me which printer you have? I know you said it's an inkjet but I was wondering what brand? Mine puts lines in over 75% of my prints. So frustrating, as waterslide is a bit pricey! That is for all the knowledge and inspiration you give me xo

I’ve done this method 3 times and each time after a couple hours on the turner, the epoxy pulls away from the image. What am I doing wrong?

What are the measurements do we use for a 30oz tumbler when using the resize image website?

What is the wait time between sparys

Is it ok to use the Rustoleum clear gloss instead of matte? That's what I have on hand but wanted to make sure first. You add your three coats of clear spray paint and then after that you do your 3 plastidip? Not one clear spray and then one p;astidip and so forth. Hope I'm making sense lol. Thank you for your tutorial.

Do you mind sharing what brand cup you used for this ? I know you said modern curve but I would love to know cup brand If you’re allowed to share ? Thank you so much for this tutorial was very helpful not many people are doing this! Everything is for Skinnys and I have 150 curved tumblers I bought in bulk from hogg that I have to sell LOL!!! So it’s pretty frustrating to see all these super easy techniques but they’re all for Skinnys. Thanks again!

Your Ring alarm gets me and my dog every time...LOL great vid. Thanks Looking for where or how you got the art for the waterslide

Hi I am a newbie and I am wonder where you purchased the transfer sheets?

Do you have to use the plasti dip?

Is this water slide paper?

Would love to know where to find image like this .

not sure if I missed this but could you please tell the exact measurements you printed your slide on? I've done water slides before but never a full size like this. I want to make sure I'm doing exactly what I should be. Thanks so much video is so helpful!!

Does glossifier fade alcohol inks like epoxy does?

I have a question i used this spray to seal my water slide but I notice it started changing but sealed it really good so why is it bleeding the color?

Love your tutorials, how long do you wait between each coat of sealer and plastidip

Did you apply epoxy? Or was this the finished result? If yes, what type of epoxy do you recommend?

Two questions: How long do you wait before you trim the edges and overlap? And I've had issues with the colors rubbing off with too much manipulation, how can I avoid that??

Cool! How did you get the marble look and the paint splatter look?

Why matte as opposed to gloss?

Hey!! Question do you not have to seal it after you place it on the cup? Does the water slide not come off of the cup after it’s placed ? How long does it take to set? Do you recommend spraying it again after you put the water slide on the cup? Thanks !!

I have been having a hard time with my waterslide wrap. I sprayed 3 times with the rustoleum 2x clear and then did 3 layers of plastidip for when I go to apply it to my cup it seems rather slimy and ripped on me, even after using the plastidip. Any idea why that might be happening? Thanks so much.

HOW DO YOU PRINT A FULL PAGE

Where did you get the glossier spray?

This is awesome! I have a question, or 2, as I am a total Plasti Dip newbie. Firstly, did you paint the tumbler white or is that a white Plasti Dip and second--Is the PD Glossifier the only PD used? Thanks so much :)

Hi why do u have to use both sprays? I have the plasti dio and i only use that one

Did you wait until the slide was dry before you trimmed the seam?

I use cricut design space and the max is I believe 9.25x6.75 is that the size used for this water slide?

great video but you might wanna stop working on a piece of carpet to avoid getting that "stuff" under your slide

Is this an A4 size water slide paper or a standard 8.5 x 11

Will this work with white or clear?

Could I please ask - I live in central NY and I was just wondering how long do I let the plasti dip dry before I can put in water?

Hi do You have to seal the waterslide or is it able to be used after this process

Sorry I'm really really new to tumblers and I missed a basic 1st Step... Are you starting with regular paper or do you have to get something special to use this technique?

How long did you wait after the final spray? Thanks.

I haven’t done waterslide yet but I see from other tutorials where epoxy is used so my question is do you have to use epoxy being that it’s not good to use it or does this take the place of epoxy for sealing cups etc. thanks

Does the dip spray, help the waterslide to stay stronger. You make it look so easy. Lol I never can take my back off smooth

Why do you use plasti dip