Full speed ahead! Floor & Watertank DONE | VW Crafter Camper Van Conversion

Подписаться 57 тыс.

Просмотров 15 тыс.

50% 1

Time to press on with the Crafter Camper Van Conversion. The weather is better so we were able to get underneath the van and fit the waste water tank and the insulated floor is in.
Collaboration enquiries - ABusAndBeyond@gmail.com
Visit our website - www.ABusAndBeyond.co.uk
Filmed with
Sony A7III - amzn.to/2ZkcHfZ
Rode Videomic Pro Plus Microphone - amzn.to/2NwaVBR
Sony RX100V - amzn.to/2mFMQdD
DJI Mavic Pro - amzn.to/2D6rUma
Cooked with
Ridgemonkey Pan and Griddle Set - amzn.to/3eRvjZj
Ridgemonkey Sandwich Connect - amzn.to/2VZfc2v
affiliate links
PLEASE LIKE AND SUBSCRIBE AND LOOK OUT FOR NEW VIDEOS COMING SOON.
Music
Tape Machine - White Flag Instrumental
All available to download from Epidemic Sounds
Try it out here - www.epidemicsound.com/referra...

Опубликовано:

18 фев 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 50

@dayofdaysdotbe 2 месяца назад

I’ve also seen people securing custom and removable furniture through those security points, with longer bolts. Or made a stowaway for bikes etc.

@brianblackburn2516 10 месяцев назад

Thank you so much , just starting our build on MWB 2020 Grafter Crafter and seeing someone with humility an honesty getting stuck in is superb..... thank you. Anna & Brian up in Scotchland. 🥰🤩😁

@ABusAndBeyond 10 месяцев назад

Aww thank you very much for joining us on our mammoth conversion 😂. Good luck with your build. It feels like the biggest project ever a lot of the time but the adventures will be incredible once it’s done.

@nigelburton7408 Год назад

Wow. It had been going on so long I had forgotten about it. Glad to see more vids on it.

@SteveField Год назад

Shawn That van is an absolute beast! It’s huge! 👌🔥. Was sad to see the transporter go but glad you did well on it 👍

@ABusAndBeyond Год назад

Cheers Steve, yeah we were sad to see it go but it's exciting to see how the Crafter progresses

@dayofdaysdotbe 2 месяца назад

Personally I would always make sure I can use the hooks again in the floor because they are really strong in case you need to secure luggage or something else. But I understand it. What I don’t understand is how much stuff people buy that’s just laying around in a garage… 😂 People should learn to be selective in hobbies and stuff. It gives you less stress!

@WrittlesCave Год назад

Best of luck guys, I'll keep tabs on ya :)

@ABusAndBeyond Год назад

Thank you

@cantafordia Год назад

Shaun and Lizzie, great to meet you at the show today. Sorry I took up so much of your time. I will look forward to viewing the show video. I might make my own video of my VW ‘Cantaffordia’ in time! Good luck with the new family member in May. Best wishes, Sandy.

@ABusAndBeyond Год назад

Lovely to meet you too! Thanks for coming for a chat. Defo make a video of your van!

@TheYellowDmon Год назад

If you make the kitchen unit tapered smaller nearer the door and larger towards the back of the van you get a wider galley area and can still fit a 2 burner unit in along with a deep sink.

@CampervanTime Год назад

Looking good! Whenever we see one of your crafter update videos it reminds me just how much work they are to do!! What's next on the list?

@ABusAndBeyond Год назад

Another roof vent then the Lino floor probably! Plus RIB bed/seat. Always got to be thinking about 7 steps ahead, it’s exhausting!

@caru547 Год назад

Shaun, when do you envisage completing the Crafter? A lot of hard work to go with, hopefully, many interesting videos to watch. Hope that Lizzie and the family are well.

@ABusAndBeyond Год назад

Ah the million dollar question. I’m guessing it’ll take about the same amount of time as HS2 😂 all joking aside, I hope it’ll be usable as a camper within 6months. But really not sure. There will be tonnes of videos for sure 👍

@leafy803 Год назад

Could you copy, include a playlist of the most useful you tube videos that you have found for your build ? Enjoying the series, thank you.

@Trebornotaes Год назад

Remember to figure in to the equation the evo kitchen units are sized to sit on an 18mm floor.

@londonjacks8371 Год назад

Carpet on the ceiling is a good idea, I’m doing that in my van, what thickness of kingspan did you use in the roof?

@ABusAndBeyond Год назад

I’ll double check when I go back out there but I think that was 25mm as well

@parki6682 Год назад

Haha, I found the very same thing with mine. Getting up the VW floor is a right pig ! Did you screw and glue the battens down or just glue.. I didn’t see the point in screwing down too.. didn’t fancy all the holes through the metal floor. And building on top it can’t go anywhere anyway..

@ABusAndBeyond Год назад

Yeah I only glued the battens down. They can’t move anywhere anyway.

@OutboundSolutions Год назад

Thanks for this video we are planning the same how did you fix the Barton’s to the floor? Screws or adhesive, if so which type.

@ABusAndBeyond Год назад

I used Sikaflex 221 adhesive. Seems to work well 👍 Thank you very much for watching

@DunkfaeOotnAbootWiUs Год назад

Haha mad face ,good start lol

@moonwrasse Год назад

Nice hoody! Are you taking the crafter down to Lowdown to bag it and tub it?!

@ABusAndBeyond Год назад

Ha ha not sure about that. I’d love to see how it looks on an XLWB Crafter though

@markpullinger3916 Год назад

Just asking Shaun could you of just layed insulation on original wood floor then put ply over or take up original ply floor use as template cut moor ply relayed original ply then insulation then ply save using battens Great video guys

@ABusAndBeyond Год назад

Yeah I’m sure that could be done as well. The battens were really easy to put down though. Probably quicker than making a template in more ply. But yeah either option is doable

@markpullinger3916 Год назад

@@ABusAndBeyond cheers Shaun

@grahamhiggins1816 Год назад

Do you know how I can remove the wiring harness along the top? Can it be run behind walls…

@Workshop-of-Allsorts Год назад

Don't forget to insulate your sliding door before you fit your kitchen... I did !! 😳... what a pain !! 😂

@ABusAndBeyond Год назад

Ah good point. I probably would’ve forgotten as well. Thank you for that 😂

@DudleyDellTelly Год назад

If you had unbolted both ends of the slat and the one next to it, moved one side forwards and the other side back toward the rear of the van, I bet you would have got it out.

@ryanspeak6632 Год назад

Hi, I've got the exact same van as you guys just the LWB version instead of maxi. Just begun the rip out! I managed to get the floor up which I agree was slightly hard work. How did you manage to remove that strip of putty like adhesive running down the middle ? Great channel guys!

@ABusAndBeyond Год назад

Thank you very much for watching. In the end I left the putty. I just couldn’t get it removed. I tried heating it up and that made it worse. The scraper I was using didn’t work so I just flattened it as much as possible and covered it up.

@ryanspeak6632 Год назад

I also tried heating it up and oh boy yes that does make it worse. I also tried cooling it with ice to see if it would chip off which worked a little but too time consuming. Today I just went at it with a flexible scrapper bit for the multitool and it literally came off in seconds! 🤣

@ABusAndBeyond Год назад

Nice work!

@BOOMEL12 Год назад

Saun are keeping an eye on weight? I am assuming you are for a gross weight of 3.5t Mike

@paulbarnes3610 Год назад

Looking good,are you considering insulating and heating the waste tank.

@ABusAndBeyond Год назад

Don’t plan to. If we plan to be in very cold conditions we will leave the tap open with a bowl underneath. If this is still an issue we will be able to insulate it at a later date

@the.endroom Год назад

I have to mention guys, I'm 99.9% sure that you are not allowed any material whatsoever between the RIB seat and the metal floor of the van. You will have to remove the floor insulation and battens wherever the bed frame fixes to the van. You will not be insured to carry passengers in transit otherwise. Best to find out now.

@Trebornotaes Год назад

I thought the same (coming autmotive background) but everyone ive talked to says the pull test covers being mounted on top of ply. Im dubious,lol.

@the_lost_traveller Год назад

Surely as long as it’s bolted to the chassis it will be ok, and as he said that’s what he’s doing won’t that be ok?

@laurabiddle6416 Год назад

Wasn’t impressed with Evo’s customer service or flat pack product. Try Majestic Wood Design, fully built & they’ll build/scribe whatever you like.

@nicolesaphir Год назад

I have to say the same about customer service; kept moving the build date back, didn't communicate and couldn't give me a definite date so ended up cancelling my order. The refund did get processed quickly and without issue though.

@daviddring8692 Год назад

Don't understand why you & so many others put battens down. Just glue pir board to floor. You have approx 14 battens (metal) You then have perfectly flat surface to lay ply on. Glue all joints as well.

@ABusAndBeyond Год назад

I’m not sure what you’re trying to say. The PIR board is on the floor. It can’t really take the weight of the ply floor so the battens are there to support the ply floor

@daviddring8692 Год назад

Don't put any battens down. You glue the whole sheet of pir board down directly onto metal floor. Just apply adhesive onto the high pieces of floor. It will then be perfectly flat to lay ply on that. Applying adhesive again. The spray adhesive I used for that. I also glued all joints. Pir board & ply. Then sanded the ply joint for if I laid vynil flooring.

@daviddring8692 Год назад

It can easily support the weight of the floor.. It will support it better. As I noticed the battens weren't exactly same level with pir board. Remember you've got approx 14 metal raised areas to glue to across van. Every 3" approx.