Fully Jarvis Standing Desk Review 

Damn i really thought you were gonna be a big tech youtuber before i saw your subcount😂 not just your footage quality, but also your presence in front of the camera! I've seen full time yters who don't seem as comfortable as you do

This quality is insane for your channel size. Must be a pro.

Great video! I would like to recommend to everyone making a sit/stand desk setup to run all the power strips on the underside of the desktop itself. This allows you to only have one cable and all the cables you have will be fixed to the position they’re in since the power strip isn’t on the frame leg. Helps a lot with cable management and you’ll only have one cable coming from the desk to the outlet to gauge distance on.

I’m just leaving a random comment so RU-vid can recommend your videos more because you get to the point and are entertaining without music... likes that’s uncommon in 2021. I wish I found your channel sooner. Awesome review

the fact that only about 1 minute in you say "i ordered the 30 by 60" is perfect. i'd say 99% of my interest in watching these is the dimension of the top to see how they look.

Great video! Like another commenter, I was surprised at the newness (?) of your channel. Your b-roll was great and icing on the review cake.

Hey Matt, this is a great video, thank you. You’re the only reviewer I’ve seen go into the right level of detail on assembly and wires. Having worked at a standing desk in the past I know the wire management is often the trickiest part. I’m curious why you decided to go with the power strip on the leg instead of the one fully sells that clamps to the desk. Also, I’m still not clear what role the “wire helper” sleeves play in cable management. Thanks!

This is such a good overview and exactly what I needed. Also the production on this was seriously top-notch. My only problem now is I was considering the 48x30 but I'm having second thoughts now that I'm seeing your 60x30 lol. Thanks a ton!

The tips are so helpful! I've watched this multiple times to make sure I can install mine well.

Great review, I ordered mine too at the beginning of this week. Enjoy!

Hey Matt, this is exactly what I was looking for. After comparing a couple of standing desk frames (I got the desktop), I fell for the Jarvis and this video just smashed all my concerns. Cheerios!

Nice review! I also had the Fully Jarvis in consideration when deciding which standing desk to buy a few months ago but ultimately went with a Steelcase desk (Migration SE 180x80cm) as it was only 150 EUR more expensive than the Jarvis in my country and I already knew the excellent built quality of Steelcase desks through my employer. Was not disappointed: This thing is sturdy af and there is almost no wobble (only if I try unnaturally hard). So in the end it was totally worth it for me and I can only encourage anybody who works from home to invest in a standing desk.

Great review, thank you. Also dig your desk lamp so much I'm gonna have to make one : )

Great review and fantastic video! Keep up the good work because you earned another sub!

Thinking of getting one! I work full time and study too ~ but I want my workspace to be spacious and comfortable 🌟😄 love your video!

That was a helpful tip on figuring out the wires when the desk at the highest point. You probably saved me a lot of aggravation. Haha

Once again i thought this is a 1m subs channel Keep the grind 💪💪

😂 clearly you are going to join tech RU-vid because I had the exact same reaction as the other commenters. Not only professional looking b-roll, but also your perfect speed in speaking.

Fantastic video all around! Really enjoyed the quality, the variety of shots and your presence. The only thing I don't think was included was your experience with the company and the stats as far as the actual size? Anyway, Your last line about talking about desks in the comments brought me here, ha! Interesting that I'm watching this video AFTER ordering my desk, but alas here I am! I ordered the Fully Jarvis 24x30, white legs with Bamboo top. Still waiting for another few boxes. Super stoked. Cheers!

That's funny! I commented a year ago with my manual s/s desk but now I'm using a 72x30" Fully Jarvis dark bamboo desk with 3 staged legs and programmable handset. I've had mine for about a month now and it's the best desk that I have ever purchased. If you have a moment you should check out BTOD's New Heights XT4 and the Deskhaus Apex Pro Max. Both are 4 legged desks with a cross support.

Just Purchased! Great review - thx! Bonus Question - "What's high in the middle and Round on both ends"?......

Thanks for the review - it's definitely the most informative one I've seen on RU-vid. Just a note that it's not possible to order the desk without grommets from Fully's EU and UK website.

I should have watched your video before I put my desk together, I also threw the desk hardware away and had to dig in a dumpster to retrieve it!

Great video. I was going to buy the Lyft V2 desk, but may have to give this deeper look.

Great video. I'm looking at getting one of these desks, and this is the only review I've seen on putting the desk together. Much appreciated! One question I have is how wobbly the desk is at it's highest setting. I'm 6'2" and have seen some other videos that show only a slight wobble, but am curious as to how bad you think it is. Also, what do you think of the thickness of the bamboo desktop? Great job!

Really great, helpful video. Thanks!

Thanks man, great review and setup tips.

Great review!

Great video, keep it up!

nicely done review, thanks

Great video! Keep it up bro

Awesome desk.

Great video 👍🏻 I’m ordering mine this week. Same company

I have a manual sit stand desk and I work from home permanently. I have no complaints for my manual desk however now I wished I had an electric one. Lol

Awesome video, thanks for sharing!

I have the fully jarvis 2020, but i am returning it because it wobbles soooo much at standing height. It wobbles as i type and my monitor shakes! This kind of sucks for a standing desk :(

Thanks Matt I 'Fully' appreciate it Need a standing desk. my job switched to permanent remote! The Bamboo top with the carve is what I am considering . . . thoughts on the carve?

Great Video! Does the desktop really have the Jarvis logo embossed on it (@ 2:06)? Assuming you just flipped it over for installation, if so... so that you don't see it? Thank you.

Nice review, planning to buy this but still hesitant. Correct me if im wrong that table top is the 2cm thick one right? I’m leaning more towards the 3cm one but the price difference is huge. Was wondering if the 2cm would be strong enough to hold a monitor arm, specially since i’ll be using it for a very long time

Great video! I was wondering if you could tell me where you got that desk lamp?

Awesome video editing

Awesome video and production quality! How is the wobble and sway at the standing height!

Great review! I was wondering what that dock/stand is that we're seeing in the video.

Great video Matt! How loud are motors when moving the desk up/down?

Hey Matt, great video. I was wondering though, which size desk was this? I was looking at the 72x30 and wasn't sure if this was it. Thanks!

I think I’ll get one for my hookah collection!

Hey Matt! Great video, but I was wondering how your experience with the stability of the desk is?

Is this a paid promotion? You did not mention anything about the stability although I did notice a bit of a wobble when you were putting what I assume was a heavy custom lamp to cover the grommet.

Hi Matt, i want to send this desk to my daughter who's 5'3" and i've read this is the best one for shorter people. I am have read some of the reviews re wobbling and that's my only concern. If it does wobble, do you know how to combat that issue? I know you can buy pads to put underneath furniture (i've done in my own house) so do you think that would fix any wobble issues? Also, when i read the return policy it read "you cannot return "Open-box Items". Well that seems ridiculous since you wouldn't know that you'd want to return it unless you fully put it together right? do you happen to know if my daughter can return it after she's opened the boxes? I am going to ask Fully but wanted to know your thoughts too. Thanks! and love the video since it really told me exactly what i should and shouldn't add on for her, and exactly what'd she'd need to assemble.

Nice review...seriously considering but .75 inch thick top over 60 inches seems thin, most rivals seem to be 1 to 1.25....any issues with warp or sag? thanks

my favorite benchmade knife ever

What's the name of that file cabinet under your desk? I like that design and have seen it in other's videos.

The recycling is very important but is not part of the assembly. Discard the boxes after you finish the build.

Where can I get that drawer you have under your desk?

where did you get that laptop holder/stand?

Not sure if you mentioned in your video but what is the size of this desk? I'm deciding between the 48" and 60"

Hey ! Thanks for the video. What size did you take ? I feel like it could be 140 or 160cm wide ? Hard to choose between both

what speakers you are using on this desk? I see its just one unit, it reduces number of wires.

I have a home recording studio DAW. I have a 27” IMac and another 27” monitor. I’m looking for a desk that doubles as a recording studio desk and an office desk for my other business. Do you think this is a good fit for me? If not do you or anyone else have any other ideas? Don’t remember if you mentioned the size of your desk. I want something about 55x28 or 60x30.

How is the wobble of this desk? Noticeable at all or of issue?

Has a familiar build to the uplift

nice Benchmade, which one is it?

Where did you get the industrial lamp?

big GGs

Is the extended range necessary?

Greta video thanks

What about those hanging cables? i don't want that.

what is the length?

Any comments on the stability of the desk at standing height?