Тёмный

FULLY Sound Deadening My 1st Gen 4Runner | Interior Restoration 

Подписаться
Просмотров 23 тыс.
% 488

Installing NOICO sound deadening mat throughout my entire 1986 Toyota 4runner. In this video I deep clean the interior and install 80 mil thick sound deadener mat in the truck. I'm trying to make this thing as soundproof as a newer car! Of course there was additional work like fixing some rust spots, laying down seam sealer, and a small amount of body work. This stuff REALLY makes a difference and dampens the noise so well! It's so much quieter inside and really dampened noise from the body panels. This is episode 2 of the interior restoration video for this 1st gen 4runner.
Great product! @noicosounddeadener4641
Link to sound deadener: amzn.to/3iv879X
Link to rolling tool: amzn.to/3F38iAN
Instagram: _rmgarage
Other videos!
► EPISODE 1 OF THIS SERIES: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-W2kYoal7k10.html
► Walkaround of this 4runner: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Nzqcc2Sx_60.html
► Installing LED Headlights Toyota Pickup/4Runner: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-4U7CWbAgnCM.html
► Toyota Offroad Adventure: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-0WfufdWNFlc.html
► Building Truck Bed Drawers: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-KqeAecJDPDs.html
►Offroading in the Sierras: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-2M_YR2vH2OA.html
#toyota #4runner #noico #rmgarage #restoration

Авто/Мото

Опубликовано:

 

1 фев 2022

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 59   
@RM_Garage
@RM_Garage 2 года назад
Thanks for watching! If you missed Episode 1, check it out here: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-W2kYoal7k10.html
@2-old-Forthischet
@2-old-Forthischet 8 месяцев назад
I have a 2002 Chevy Express cargo van I used for towing. It is incredibly noisy inside when on the freeway. My solution is to remove my hearing aids. Sounds like a brand new car!
@edwinenriquez5373
@edwinenriquez5373 5 месяцев назад
You got new follower really nice videos dude this is my 4th video of today planing of seeing all the other series
@chriscollins260
@chriscollins260 2 года назад
This is great! I have the same truck and so many of the same issues. I'll be looking for those holes in the floor pan on mine.
@ketobeast8489
@ketobeast8489 4 месяца назад
Brush attachment for shop vac would save tons of time, been there done that. Less mud you have to wipe up at the end is always better. Goof off would also take that old green adhesive off easily for future projects.
@meganfoley4123
@meganfoley4123 2 года назад
Love the ASMR cleaning content!
@jp71889
@jp71889 Год назад
Thanks for sharing man, fun project to watch.
@CB-hr6zs
@CB-hr6zs 2 года назад
What a gem u scored getting a 1st gen 4Runner and u have a 1st gen pick up they both are amazing!
@RM_Garage
@RM_Garage 2 года назад
Appreciate it!
@5238jorge
@5238jorge 2 года назад
Awesome work man and perfect timing I just got my box of killmat today can’t wait to get it all done.
@RM_Garage
@RM_Garage 2 года назад
Thanks!
@Johnnydammit
@Johnnydammit 5 месяцев назад
You killed it bruh! Nice work! Now to spend some coin on a killer sound system! JL audio, Morel, Rockford Fosgate etc....
@JacobVersus
@JacobVersus Год назад
i did this on my 66 bug before i sold it but i’m dying to do this to my newly acquired 85 4runner. great video thanks for sharing, im sure it made a huge difference.
@RM_Garage
@RM_Garage Год назад
It did!
@projectxdrift63
@projectxdrift63 2 года назад
Looks rad! Now I have to do mine!
@RM_Garage
@RM_Garage 2 года назад
Doors and quarter panels especially made a difference
@dana52484
@dana52484 2 года назад
enjoying your vids man! ✌️
@RM_Garage
@RM_Garage 2 года назад
Really appreciate it! Thank you!!
@christopherorr1018
@christopherorr1018 2 года назад
Finally got an 86 a few months. Getting ready for restoration. Good content. Thank you.
@RM_Garage
@RM_Garage 2 года назад
Awesome! Appreciate it and thanks for watching!
@tankdestroyer01
@tankdestroyer01 Год назад
Nice video. Excuse me, do you have the link for those D-Rings ?
@LostandFoundTravel
@LostandFoundTravel Год назад
Well done. I found 2 summers worth of gremlins when I sound deadened by LX450.
@RM_Garage
@RM_Garage Год назад
Worth it in the LX?
@LostandFoundTravel
@LostandFoundTravel Год назад
​@@RM_Garage Maybe? For me it was part of reducing stimulus for my pup who had some car anxiety. I also darkened the non-driving windows for the same reason. BONUS that it's cool looking.
@griffinwilson3151
@griffinwilson3151 17 дней назад
If I have carpet in mine how would I put it back in after doing something like this?
@preacher031163
@preacher031163 Год назад
What brand and how many square yards?
@alejandroruiz6549
@alejandroruiz6549 2 года назад
I just picked up an 89 and recently stripped the entire interior. Going to clean it up next. What spray did you use to clean up all the grime?
@RM_Garage
@RM_Garage 2 года назад
I used TSP and purple power. Thanks for watching!
@connorantkowski2403
@connorantkowski2403 2 года назад
Hey awesome video. Just wondering what cleaning material did you use in the bottle?
@RM_Garage
@RM_Garage 2 года назад
Thanks! It’s TSP, and later on I just used purple power.
@connorantkowski2403
@connorantkowski2403 2 года назад
Thanks dude. I’m redoing a 1988 one right along with you. Much props 🤙
@max7143
@max7143 Год назад
I have a spotless 88’ Runner that at some point I’ll be doing some sound deadening. Did you consider lizard skin at all before going this route?
@RM_Garage
@RM_Garage Год назад
Thought about it! Chose the mat because it was cheaper than spraying.
@dundeeecroc
@dundeeecroc 2 года назад
Great Job! I have a question regarding water leaks on the driver's side of the 1st gen 4runners, I have a 1985 4runner and I am perplexed to where the water is weeping in, any idea where it may be weeping in?
@RM_Garage
@RM_Garage 2 года назад
No clue! I got lucky and happened to find a pin hole. Maybe check by the rubber grommets where the heater enters the firewall, or near the kick panels, or any common rust areas. Just gotta dive in there and check it out.
@chriscollins260
@chriscollins260 2 года назад
I had a leak on the top right corner of the windscreen and also a rough rusty patch on the inside of the A pillar on the same side that was stopping the door from sealing. The windscreen leak dripped out through the trim onto the corner of the seat so it was hard to spot the source. I used a plumb bob to find it.
@Theyresellingchocolates
@Theyresellingchocolates Год назад
What grit would you recommend to sand rust off 🤔
@RM_Garage
@RM_Garage Год назад
I just used what would take it off. Something like 220.
@camerontrail7281
@camerontrail7281 2 года назад
i have an 88 pickup, i ordered 10 sq ft, do you think that’ll be enough? it’s an xtra cab
@RM_Garage
@RM_Garage 2 года назад
I don’t think it’ll cover all of it, but it’ll do quite a bit. I think I ordered 1 box for my xtra cab and it got the whole back of the cab and a lot of the floor pans. You can do the math on it to find the square footage. Length * Width
@laxativeuser5202
@laxativeuser5202 2 года назад
Did you only order one box of the sound deadening foam
@RM_Garage
@RM_Garage 2 года назад
I bought 72 sqft of the sound deadening mat. (Silver stuff). In the next video I used the foam (black stuff) and used 1 box.
@stalker_gregori6258
@stalker_gregori6258 2 года назад
Hey hopefully you see this but how many boxes did you have to buy? looked at the Amazon listing and saw it was 36 square ft. Per box, plan on repairing my project 4runner and want to use the same material as it turned out so well!!
@RM_Garage
@RM_Garage 2 года назад
Hey! I used 4 boxes in total that were 18sqft each. So 72 sqft in total, exactly what you plan to do. And I had some left over.
@boorhadly
@boorhadly Год назад
@@RM_Garage what nil thickness did you go with any why?
@schlomoshekelstein908
@schlomoshekelstein908 Год назад
@@boorhadly 10mm
@boorhadly
@boorhadly Год назад
@@schlomoshekelstein908 400mil? of 5 layers of 80 mil (2mm)
@schlomoshekelstein908
@schlomoshekelstein908 Год назад
@@boorhadly that's what rolls royce uses so that's what I went with
@joshuasalvador2016
@joshuasalvador2016 2 года назад
Was 34 sheets enough for the 1st gen 4Runner? wanting to do my 1st gen as well but was wondering if I 36 sqft is enough or would i need 72sqft to do the truck. thanks
@RM_Garage
@RM_Garage 2 года назад
I needed 72 sqft to do the whole truck
@joshuasalvador2016
@joshuasalvador2016 2 года назад
@@RM_Garage ah I see, did you notice a good difference with sound dampening, heat resistant, and sound system? I read that some people also put a second foam layer over the kilmats
@RM_Garage
@RM_Garage 2 года назад
@@joshuasalvador2016 Yup! I have a video on my channel putting a second layer on top of this. It worked really well and I don't regret it at all
@joshuasalvador2016
@joshuasalvador2016 2 года назад
@@RM_Garage I see, appreciate the reply helps a lot!
@JevaughnGraham123
@JevaughnGraham123 2 года назад
How much did all the material cost?
@RM_Garage
@RM_Garage 2 года назад
$135
@JevaughnGraham123
@JevaughnGraham123 2 года назад
@@RM_Garage sweet, any links?
@JRBthird
@JRBthird 2 года назад
Looks like it prob had a quarter panel skin replaced at some point in its life
@RM_Garage
@RM_Garage 2 года назад
Yeah I was thinking the same. Might need to replace it again, it’s pretty banged up even after doing some body work on it. Might go with fiberglass panels.