Furnace Filter - How to Change it the Right Way & SAVE Money

Подписаться 871 тыс.

Просмотров 323 тыс.

50% 1

STOP wasting money & learn how to change a furnace filter the right way & why. I take your through how to find your filter, which filters to use & how long they really last. Easy tips that can make this job simple.
Furnace filters I use: amzn.to/3ZJ4Uof
Disclaimer:
Due to factors beyond the control of Silver Cymbal, I cannot guarantee against improper use or unauthorized modifications of this information. Silver Cymbal assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Silver Cymbal recommends safe practices when working on machines and or with tools seen or implied in this video. Due to factors beyond the control of Silver Cymbal, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Silver Cymbal.

Хобби

Опубликовано:

17 янв 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 368

@SilverCymbal Год назад

Thanks for watching please LIKE & SUBSCRIBE - Filters I use: amzn.to/3ZJ4Uof

@michaellewis6569 Год назад

It seems like several recent videos could have been left a second or two longer at the end to avoid such an abrupt cutoff.

@TF-IROCO Год назад

I subbed, great content

@MarkRowsey Год назад

I've asked every HVAC guy that comes to my house what filter I should use and they all give me the same advice as you. But, obviously, you did a MUCH BETTER job of explaining why. Thanks for the great content!

@jhanna9901 Год назад

Write on the filter the date you changed it with a Sharpie. Or put a stickie note on the outside of the furnace with the date. Always helpful to maintaining a schedule.

@mljs9245 Год назад

I make a note on my kitchen wall calendar when I should be changing my filter. I don’t look at my furnace that often for a note on it to be useful. 😊

@markb8954 Год назад

Our wifi enabled Ecobee thermostat sends us a note on when to change. Handy “reminders” for PM/CM.

@sleepinglioness5754 Год назад

I keep a magnetic white board w/pen right on the furnace. I strike out the last date and add the new date when changing the filter and it gives you the history of when you changed the filters. Mine is now years old and I see exactly when I changed every filter or made changes, etc. etc. Best system I've ever used.

@srobeck77 3 месяца назад

@@sleepinglioness5754 for another high speed tip, ALWAYS keep a spare ignitor and flame sensing rod next to the furnace. Guarente'd wear item (that you can clean a few times before replacing) but will save you a $500 service call in the middle of the night on the coldest day of the year, when it will fail.

@Zeek800 3 месяца назад

I write the date I put in the new filter on a piece of painters tape which I stick to the furnace. If it’s been cold and the furnace has been on a lot I change it at 2 month# max. If it hasn’t been on very much I may stretch that to 2 1/2 to 3 months. Some 3 M filters have a link to an online tool that will remind you when to change filters.

@tfrench4366 Год назад

I've always told my kids to replace their furnace filter three times a heating season. Recently my son called me and said his house was not heating up. I asked him if he replaced his air filter. He answered no. Turns out his filter was dirty, really dirty. He replaced the filter and his house was able to heat up. Sometimes Dad knows what he is talking about.🤣🤣

@SilverCymbal Год назад

Dad power 100%!

@philbertshevitz3113 Год назад

More than sometimes

@yentrader Год назад

Kids! 😒

@busterscrugs Год назад

three times per season? huge waste of money lol

@tfrench4366 Год назад

@@busterscrugs when you have dogs and cats it's well worth the money. It's like changing the oil on your car.

@djibrildiagne4723 Год назад

This is exactly why I’m a fan of yours. You touch on everything and anything. Just purchased my first house and was wondering why my furnitures were constantly dusty regardless of all the cleaning I’ve been doing. Sounds silly but I didn’t even know furnaces required a filter. Needless to say when I went down to the basement to checkout it out,all the dust finally made sense. I don’t think the filter ever been replaced. It was so old that it was falling apart as I tried to take it out. THANK YOU. THANK YOU.

@basshart1440 Год назад

I love how organized and insulated your basement.

@silvertbird1 Год назад

I love changing the air filter, it's the simplest home maintenance project and makes me think I have actually accomplished something. I'm in Texas, so the air-conditioning runs far more than the heat, and I'm always surprised how much it catches in just two or three months.

@07cowboy07 Год назад

My uncle owned an HVAC company for 20 years. When they installed my new furnace and AC I was told to run the cheap filters due to air restriction and that furnaces are made for those filters, not the expensive ones. Was also stated that replacing every month is recommended and if running the expensive filters to change twice a month due to them being so restrictive on air flow. Just my 2 cents.

@tjam4229 Год назад

I think you make more sense than the guy posting the video

@christopherhaak9824 Год назад

That's simply wrong. Modern efficient furnace filters are not restrictive unless allowed to get too dirty.

@user-uu2rf8ev7z Год назад

It cost me a $120 service call for the tech to tell me that the reason the furnace was not working was because the mid-range pleated filter was plugged after only one month. Middle of winter, windows closed, no pets or kids, no sawdust or other dust creating activities. Recommended that I go to the basic fiberglass filter which I still continue to replace regularly. No problems since then. Also beware of the Furnace Duct Cleaning companies. They use low paid inexperienced workers who should not be around modern furnaces with expensive electronics. The guy removed the electronic board and simply tossed it onto the concrete floor, damaging it.

@tjam4229 Год назад

@@christopherhaak9824 , you are wrong. Too many people claim the filters clog even before recommended time of changing, even under close to ideal situations. They are made just too close to being “restrictive” when brand-new…even before they trap any debris. We don’t live in surgical wards.

@greenearthblueskies8556 Год назад

It’s 2023.... and this video was right on time. Thanks

@nErfEr308 Год назад

The 3M 1900 is the go-to filter for me. Project Farm found it has comparatively very low static pressure while still filtering significantly more. They have triple the number of pleats compared to the basic filters which also helps airflow.

@ErikMeike Год назад

Yes I agree the 3M 1900 is good and even think that you can go higher if you want. You bring up a good point of the part that actually matters is the static pressure. 3M does a good job at adding more filter material on their higher end filters to not cause the issues of it being too restrictive as mentioned in this video. They even rate their filter pressure drop at many flow rates, and it often can even be lower than the basic home depot filter shown in the video. This means the ultra high end 3M filter will be less restrictive than the middle of the road home depot filter.

@slipstreamvids7422 Год назад

For every increase in filter mesh, there is a commensurate amount of additional pleats. This keeps the filter looking the same across all mesh levels to the blower.

@srobeck77 3 месяца назад

@@ErikMeike 1900 is wayyyy to restrictive. Thats causing your fan to use way more electricity, run hotter, have less airflow and it will wear out much faster. You just want a standard pleated not a hyper dense filter for those reasons.

@aaronbricault2467 22 дня назад

I suppose every furnace is subjective to what it can handle for filtration. My thoughts on it are during winter you don't need to filter out pollon and some of the other things so a 1000-1300 should be fine during your heating season. Spring and summer if your running the air circulation I would go 1600 or above to give you that added benefit.

@KamfaKing 15 дней назад

@@srobeck77 3M filtrete 1900 - merv 13, but also twice the media as most merv 8's on the market (1,560 sq. in) so they do not clog up fast, or create static pressure build up any faster then the typical merv 8. Oh, but they do collect smaller particulate matter MUCH better than any merv 8 on the market (including particulates from wildfire smoke) - which equates to cleaner coils, less work for your motor etc, and FAR better overall air quality in your home. It's a no brainer. My residential HVAC heating/cooling system (Maytag) is close to 20 yrs old. Other than changing out a pressure switch yrs ago, not a single issue. I change the 3M 1900 every 4-6 weeks in summer, 8 weeks when snow is on the ground.

@birdkitty6817 Год назад

Thank you so much for your help. Your insight and concise instructions are invaluable to single and widowed folks...

@SilverCymbal Год назад

Glad it was helpful! Thank you

@birdkitty6817 Год назад

@@SilverCymbal You are welcome!

@SeanBaker Год назад

Goodness, my old filters were TOO restrictive for my system! During the summer, my AC would run forever before satisfying the thermostat. Once I changed to a different level of filters, it was like night and day. Very happy I changed to the mid grade filters.

@SilverCymbal Год назад

Thanks for sharing - This is happening to a lot of people now

@stephenkidd1012 Год назад

I used to use a MERV 11 until I realized it restricted the air flow, as you say, and sent for a MERV 8. It's great. Now I've switched to a reusable filter that I vacuum once a month and wash in the clothes washer once every 3 months or so. I love making less garbage!

@xtek465 Год назад

Great job. I think you hit all the important points. I was surprised to note that my filter replacement plan is exactly like yours.

@stevenle1760 Год назад

Great advice. My HVAC installer also said the same thing. This filter is just to protect the heat exchanger and coils. Too restrictive of a filter will burn up the motor or damage the furnace heat exchanger or electrical coils as they expecting a minimum airflow to keep them from overheating.

@stevenle1760 Год назад

If you read the installers manual for a furnace or air handler it will tell you the minimum airflow you need. Restrictive air filters mess that up

@timyu9576 7 месяцев назад

这是个很重要的问题，过滤网只是为了保护电器而设置的，高密度滤网并不能为你提供更高质量的空气！密度过高会损坏你的电器。MERV6-8最好！

@mattheviewer Год назад

Helpful info! One can use a fine cut file, 1000-2000 grit sandpaper or foam sanding blocks to sand the nasty sharp edges off of sheet metal, if needed.

@BigDemocracyEnergy Год назад

I have a boiler and I don’t even need a filter but I still watched your video just cause I love your videos… 😂

@srobeck77 3 месяца назад

you just have to be concerned with the water quality inside the pipes. Tap water will eventually turn into black moldy sludge on the inside unless you chemically treat the water inside boilers

@lesevesel2898 Год назад

I live in the gorgeous deserts of the American Southwest (Las Vegas, NV) and we change our filters every three months without fail. We used pleated Filtrete filters, but we invested in electronic filters from our residential HVAC company. Costs way more, but it also filters out more dirt, dust, pollen, and finer particles than standard filters. Our health is much better since using them.

@srobeck77 3 месяца назад

Hopefully you also have DC furance fan motor too. Those you can leave running on low setting 24/7 because they use way less electricity than the typical AC fan motors. I would consider that combo a must for the best air cleaning results.

@munozinni Год назад

Gracias señor Silver Cymbal!!!! That’s a job for the man of the house 😊

@SalvadorSTMZ Год назад

One thing I learned from watching HVAC technicians is don't get the most restrictive filters because they will cause premature wear on the blower motor. Likewise don't get the cheapest ones because they allow dust to accumulate on the evap coils.

@SilverCymbal Год назад

I totally agree with them, my old house had one and I couldn't figure out why AC was so poor. swapped it to a mid grade, it was night and day

@christopherhaak9824 Год назад

That's simply false with modern ECM squirrel cage blowers. There is no additional wear on these blowers as they spool up and down to deliver the necessary air flow rate.

@srobeck77 3 месяца назад

@@christopherhaak9824 ECM motors still have to unnecessarily spin faster to make up for the restriction in the filter. And fan motors in furnaces have been squirrel cage types for over 4 or 5 decades now, so thats not really a benefit, its just the standard.

@GOAP68 Год назад

I was taught to base filter change on the amount of light that passes thru it. Check regularly but only change as needed.

@tudeanimation Год назад

I always spend time trying to decide which rated filter to get. No more. Thanks for this information.

@thegoods2240 Год назад

I made a hole in my return in the basement, at the floor level, so it was still drawing most of the return air from the 1st floor, but now also some from low in the basement. The air quality in my basement improved exponentially, and the basement smell was gone within a few hours. Running that damp cold basement air through the A/C coils removed the moisture, and really did the trick!

@duanehundley Год назад

I’m sure you have checked your radon levels but someone else might not.

@thegoods2240 Год назад

@@duanehundley I did, but radon goes everywhere in a home regardless, though I agree it usually is worse in a basement. The reduction in humidity in my basement from cutting a little 4" hole in that return, blows my mind.

@srobeck77 3 месяца назад

I would highly recommend you install a UV light (kills mold spores) for even greater smells, air quality, and ensures the mold doesnt grow on your ac coil inside the furnace. I bought mine on amazon, watched a youtube video, and installed it myself for just over $100. The UV bulb hasnt burnt out yet after 3 years

@aliabbadi9149 Год назад

Thank you for these high quality videos sir, please keep them coming.

@XPAESX 5 месяцев назад

... thorough, concise, and easy to understand. Thank you for sharing. It was very helpful to me!

@BLKWTR Год назад

Awesome period of instruction and SOP! You sir are a rockstar !

@PrincessCutLawnCare Год назад

Thanks for reminding me! My filter is about 6 months past due 😂

@markp.7165 Год назад

As was said here there has to be a balance but for me I take a slightly different approach. I use the cheaper filters (maybe not the cheapest thing out there) but I change them more often. We also have several stand alone air filters one on each level of our house. The reason for this is that in the mid Atlantic we have three season with a pleasant fall and spring where our HVAC systems do not run that much. With that in mind and having pets I want full time air filtration which is why we use the stand alone air filters. Having been a home inspector at one time I do recommend staying away from the ultra restrictive filters because some can cut the airflow as much as 30% when they are new and much more when a bit dirty. As the video said a middle of the road filter is a good choice for most home owners.

@doug2445 Год назад

This has been a constant battle over the last 10 years in this house. It's come to replacement every 5 to 6 weeks. I've been using those Purple 3m, which run about 15.00 each.

@roofman1978 Месяц назад

Great video. Easy to understand! I appreciate your help!

@billmcmeekin7909 Год назад

Good call bud! I've been doing this for a decade. I buy $7.00 pleated filters and go through 3 a winter. Always clean . Nice!

@srobeck77 3 месяца назад

3 a winter, wtf do you ever vacuum in the house or do you have 4 sheep herding dogs shedding in there? Thats not normal, lol.

@billmcmeekin7909 3 месяца назад

@@srobeck77 Our winters/furnace needs are about 6 months. We get plenty of dust in fall and spring. We have no critters and a very clean house. I just don't like a filthy filter and don't put a heavy load on the furnace motor. But yeah it's not uncommon to go through three a year.

@Coronet_1969_ Год назад

Great info and tips....we have two furnaces and one is in the attic which is really hard to get to as I age but we have two dogs so I try and change the filters every few months. The air flow direction is always a question, not so easy to figure out the direction but the arrow should point toward the furnace is what I've learned.

@dustbat Год назад

I had hard to get to filter under house. Got too old to deal with it. It was a Space Guard and I hated it. Had to put it together to replace it and components would brake and have to be sh@t rigged. HVAC guy said, go back to simple in house as it will do fine. Still have large filtrate filter in attic but is easier than the SG to change. As pointed out the furnace is not an air cleaner like we wish. No matter what I use we get too much dust.

@johnoneill7485 Год назад

Agree with everything you pointed out...good idea to purchase your filters in bulk, online, much cheaper and less likely to forget to buy one when it's needed...I but a dozen at a time for approx.$60...also, free delivery!

@32toddv Год назад

I originally used the first example filters when I bought my home in 02, about a yr or two later I started using the 2nd one pictured. I usually replace my filer every 1 to 2 months depending on use.

@mainj54 Год назад

I use permanent MERV 8 electrostaic filters. One time purchase. Clean every couple of months. Good to go.

@carolcarden4712 Год назад

My air return/filter is in the hall of our home. I noticed lint along the edges and corners of the return, so I now place the blue painter’s tape around my filter, sealing off any gaps between the filter and frame, forcing all the return air to go through the filter and not sneak through the sides. It actually cuts down how often I need to dust the furniture.

@lazvt8469 Год назад

I buy low-cost pleated and run fan 24/7. Change out every 6 weeks. Just replaced my 25 year old Trane. Great unit. Running fan all the time filtrates better and keeps house temp more uniform between my 3 levels. Added cost of electricity running fan full is minimal.

@srobeck77 3 месяца назад

I do the same thing. Hopefully you told the new contractor that was your intention, so that he sold you a unit with an ECM (DC) fan motor which is far cheaper to run than the typical AC fan motor. Also, Id highly recommended adding on a UV light to the furance. Very easy to do yourself after watching a youtube video on it.

@lazvt8469 3 месяца назад

Never knew … will look into it. Thanks

@kathleentripp7306 Год назад

We use the fiberglass one and change it every 30 days.(marked on calendar). We have 3 medium dogs. Our furnace man said to use the fiberglass ones and change once a month so we do. He also said to never use the reusable ones.

@SilverCymbal Год назад

Most repair/service techs are not fans of the high efficiency stuff. For a long time there was no medium sort of grade. I think the fiberglass filters do a great job and filters are really there to protect the motor and intake which fiberglass works well on

@srobeck77 3 месяца назад

Fiberglass (aka leaf catchers) and the worse and cheapest ones you could ever dream up. I thought only slumlords ever used those in rental properties. Ya you wanna switch to a pleated filter asap, but not an expensive high density 3M scam version. That leaf catcher filter your using, is dumping a ton of dust and dead human skin into your fan motor and coil inside the furance. And of course also, your breathing it in constantly too. Never, ever, use the a leaf catcher filter, they do almost nothing for dirt. Just look at the gaps in it, very obvious.....

@x86cowboy Год назад

Another tip: Write the date you installed the filter on the edge of the filter. Also, another good rule of thumb: - During peak Winter / Summer months when Heater/AC is on almost 24/7 - change the filter every month - During nominal temperature months, when the Heater/AC is hardly on - change filter roughly every 2.5 - 3 months - As far as ratings go, Merv 8 is about max middle-of-the-road rating before air restriction issues can start being a problem

@buckybarnes3803 Год назад

Cheap ones don't choke the furnace. My thermostat keeps track of furnace usage and I change based on that

@srobeck77 3 месяца назад

Never use fiberglass filters. Always use pleated. Never use high density 3M scam pleated filters. That's what you all you need to know.

@MJLK.123 2 месяца назад

Thank you for showing us how to do it properly, simply explaining how it works, and why even people with allergies should buy the mid-range filter and invest in a room air purifier. 🙂

@Z28L98 Год назад

I moved into a new construction house last year. The filter is 5 inches thick and the replacement recommendation is every 6 months. Need to order them online because no Home Depot, Lowe's or any other hardware store near me carries them

@mattstetter734 Год назад

We lost our Lab/Border collie in September and I replaced my filter on my regular schedule in October. Last week I changed my filter and it was the cleanest filter since we moved into this house. If you are a pet owner regular filter changes is a must. I do every 90 days with middle of the road filters.

@dustbat Год назад

As wife and I got older, we lose more hair than the animals!

@BostonBorn Год назад

I’m glad I didn’t skip this video, I think mine is installed backwards…lol

@srobeck77 3 месяца назад

Draw an arrow with black marker on the ductwork. It should always point toward the furance. The second pro tip, write the date on the new filter before you put it in.

@tacocin Год назад

Check the furnace or air handling unit documentation. It should be specific about the recommended MERV rating for your system. Mine says MERV 13 so that's what I use.

@srobeck77 3 месяца назад

Honestly thats too dense and you're running your fan motor alot harder than it needs to (more electricity) and getting very little in return. If you want improved filtration, you want to get an electronic air filter, are ionizer, and UV light (kills mold spores) installed instead. MERV 13 is just a gimmick if you ask any hvac tech.

@gugion Год назад

I use a MERV 14 filter which some may consider "restrictive", but the brand is known for good flow and not much pressure drop. No problems yet.

@GregSr Год назад

Based on my own experience, I change my filters twice a year. I have two separate heat pumps / blower systems. One for upstairs and one for downstairs. I track how many hours the system is running, not some some arbitrary number of months on a calendar. If the system is not running, the filter is not getting dirty. My heat pumps only run when heating or cooling is called for. Here in SoCal, there are two distinct seasons - summer and winter. For a month or two between the cooling and heating seasons, the weather is very mild and the systems are essentially not used. That's when I put new filters in the air handlers - between seasons. So each heating or cooling season starts with a new clean filter. I use MERV 8 filters which do a good job without choking the system.

@ProJanitor Год назад

I’m surprised there was no mention of removing the new filter from the packaging. If you’re a mechanic, you’ve seen what I’m talking about 😂

@henrymorgan3982 Год назад

Funny. Check out the Just Rolled In Channel!

@erikj9962 Год назад

My HVAC system uses a 20"x26"x5" air filter which is expensive at $50+ if they are even in stock. I installed a vacuum pressure sensor downstream of the filter to measure the pressure drop and determine when to replace the filter.

@SalvadorSTMZ Год назад

The 5" ones last much longer because they have more filter material. They won't clog up as fast.

@erikj9962 Год назад

@@SalvadorSTMZ I get about 18 months out of one filter. When I bought the house the filter in there was 5 years old, but very dirty and restricting flow.

@srobeck77 3 месяца назад

Use your eyeballs and its just as effective. Typically a 4-5" filter can go about a 1 year but mileage varies with pets or if you have wood floors that you mop weekly, etc.

@supamannn99 Год назад

You’re a godsend. Thanks

@lorricoulthard3812 Год назад

Hi- I want to thank you for ALL of your videos. You have class and intelligence which we appreciate. I do have a question- do you know or have any info on reusable filters? I would appreciate and value your input - thank you again

@gobosMommy Год назад

we do ours every month because we have 2 ceiling intakes. 1 is in the kitchen, and 1 is in the living room. so between the grease from the kitchen and the pet hair from 3 animals, you can really start to hear it sucking harder towards the end of the month! i just write "filter" on the calendar every month and my husband checks it off once he's done it.

@RobotMowerTricks Год назад

I do it when the weather changes, so 4 times a year roughly. I use the high flow during the summer and winter and medium filter during the spring and fall.

@srobeck77 3 месяца назад

Lol never use the high density filters at any point, regardless of how you think your beating the system. Your just stressing out your fan motor every time it has to run.

@milesparris4045 Год назад

Mine has a return register that's luckily the same size as the filter, so I replaced the plain vent with one that accepts a filter. I put the cheapest filter in that and a really good one in the unit. I replace the cheap one every month and the good one now lasts about a year, though I still change it about every six months.

@tihspidtherekciltilc5469 Год назад

I'd put a good one at the return inlet so you don't have dust and whatnot collecting in the ductwork.

@milesparris4045 Год назад

@@tihspidtherekciltilc5469 There is no ductwork, it's at the floor immediately under the furnace intake where the main filter lies. My reason is to make those $30 filters last by trapping the bulk of dust with a $2 filter.

@srobeck77 3 месяца назад

As long as you arent using a fiberglass filter, then yup get the cheapest pleated filter.

@Leonardokite Год назад

When I had that type of filter I bought two washable filters. I would swap them out every month. I also left the fan on 24/7 for air circulation and filtering.

@LFGMgoJets 11 месяцев назад

thanks for the help bro!

@kove Год назад

Instead of teaching my 3 boys, I'm leaving them a playlist of your videos 😅.

@m3rdpwr Год назад

When my system was installed, it used a 5-in thick filter. That thing lasted forever and was still clean when I replaced it. I find the 1 inch ones with less filtering area, didn't last nearly as long.

@partsdave8943 Год назад

Heat and AC guys in my area suggest the cheap ones because of the air flow restrictions of the other types.

@srobeck77 3 месяца назад

Cheapest "pleated filter" not fiberglass. You gotta pay attention to the fine print, lol

@cherylvandezande4483 4 месяца назад

Thank you ❣️

@pctlvr Год назад

great info,thx

@rickvargas7333 6 месяцев назад

Thanks!

@Dimka2 5 месяцев назад

if you watch other hvac videos basically if you wanna filter better and last longer just upgrade to a thicker box, on 1 inch you are pretty limited on filter, do 4 or 5" then you can run 11 and 13, looks like your furnace has plenty of room you could splice in a 5" filter box and with merv 8 it would last you all year

@healthshack Год назад

Just got a new furnace a few years ago and the installer said no matter what the filter says you should replace your air filter monthly and I agree. Don’t buy the most expensive filters and replace them monthly

@JenniferFuchek Год назад

I would've liked for you to go into a bit of explanation of MERV & SEER ratings. I use a SEER 11 as it seems to be a good balance of filtration and airflow. I'm unable to find what my system recommends (no paperwork available and can't find specific info online).

@user-em6ie2be7x Год назад

No kidding about people putting those filters in backwards. The previous owners of my house did the same thing. 🤦🏿

@dasiegel Год назад

super helpful thx

@melanie010203 Год назад

When we had new heat pumps installed, the installer said to use the cheapest filters and replace them more often. He said the units will last longer because (like you said) the more expensive kinds strain the system.

@srobeck77 3 месяца назад

If by "cheapest" he means fiberglass, than thats completely wrong. If by "cheapest" pleated filter, than that would correct.

@SS2369 Год назад

Based on all of my extensive research, the average home should use a Merv 8 -12 filter. I replace every 33 days with a reminder on my phone.

@srobeck77 3 месяца назад

30 days is just a reference. Your eyeballs are the best judge of when it needs to be changed. In the spring and fall, your furnace is barely running and its more like every 2-3 months for a filter.

@SS2369 3 месяца назад

@@srobeck77 My heat pump runs often, I also have my fan set to circulate air at times even with no heat or Ac on. I have allergies and this is what works good for me but not ideal for all cases.

@srobeck77 3 месяца назад

i run my fan 24/7, but i dont feel like the airfilter does much for pollen. Youd need to have an electrostatic filter installed with the fans running 24/7 to really make a difference. I got an upgraded DC fan motor so iys uses about a quarter of the electricity that a typical AC fan motor uses.

@mawalie1 Месяц назад

MERV 10 + daily dusting + robo vacuuming + kids + pets + summer = 3-4 months. Invest in expensive filters and never compromise on wellbeing.

@leemiller4375 Год назад

An old dirty filter can make your system work harder and use more power.

@kennixox262 Год назад

Good advice. My pet peeve are return vents that are ceiling mounted. This requires breaking out a ladder to change filters. Fine if you are young and strong but what are people who are older or not able to haul out a ladder and climb it? Then people wonder why the filters are clogged. The system that you have is perfect as most anyone of any physical ability can change it. My other pet peeves are HVAC systems in the attic, especially gas fired HVAC systems that the homeowner simply can't monitor on a regular basis. Just some thoughts.

@philbertshevitz3113 Год назад

Xlnt video, what you advise is the same as what my hvac guy said...

@rickytorres9089 Год назад

You CAN run your HVAC 24/7, just look for Ventilation/Fan mode and adjust accordingly. IF you got a return filter it WILL pass through it 24/7 if the venting/fan mode is switched on (sometimes you can even choose between low/high even).

@mattr4181 Год назад

I started watching your videos when I was searching for how to make my lawn look better and I'm glad I did. Thank you! After over 20 years of experience in the hvac industry I don't think I could have explained filters any simpler than you did in this video. If you'd ever like to dive deeper into the subject I'd be happy to help out

@blackhorse2947 Год назад

Good information

@jamesathendune9026 Год назад

A couple comments. I recommend turning off your furnace and vacuuming it inside. I was surprised at the dirt accumulation and some of the construction materials found (old wood and nails). We have an older house. Our furnace technician recommended using only cheap filters which we change monthly due to family allergies. (The prior owner had 3 cats!) This plus professional vent vacuuming does make a difference. I did cover bare concrete walls with fibreglass and foil because concrete sucks away heat in our Canadian winters. The intent was to push additional heat into the house and it worked. I note that some around here even enclose their hot water tanks with foil to reduce hot water tank bills. Hopes this helps someone.

@smarthome2660 Год назад

Imagine how dirty mine were after 89 years. I cleaned mine out for the last time then I moved the filter to the first floor and added a whole new return duct and a 2nd filter. All of the air that passes through both ducts now are clean. Read my post to see what else I did.^^

@dustbat Год назад

How are you guys dealing with heat and global warming? Do you still have gas and oil, etc? Cannot picture how heat pumps will work where you are as they are border line, even here in Virginia.

@stevedeleon8775 Год назад

Our Heating/Cooling Unit has a access vent door on the ceiling in our living room..Size #18×30×1

@srobeck77 3 месяца назад

Hopefully the filter is just before the components inside the unit and not downstream from it. Thats the main purpose of them to protect the unit from dust build up.

@TF-IROCO Год назад

I use a reusable filter and it's lasted 15 years so far.

@zhelko Год назад

you should talk about the benefit of using a ‘fatter’ filter, e.g. a 3-inch one. even with the same filter rating it has larger filtration area (more holes for the air to go through) so it is less restrictive, and allows for more air to go through while maintaining the same level of filtration.

@SilverCymbal Год назад

Yes that is a good point, someone else mentioned that also. Its really a shame that they are so rarely used. Not sure why, I don't think it cost the installer much of anything more either.

@busterscrugs Год назад

They also don't need to be changed as often. I've got a thickboi 3 inch filter and it looks almost new after 3 months. Granted, I also keep the house clean.

@bootburner4544 Год назад

Fatter filters can only be used on a very limited number of furnaces and definitely won't fit in the return registers in walls and ceilings.

@thomasfallon2001 Год назад

@@bootburner4544 actually that’s not true, I have 3 inch thick media filters in my regular old ceiling return vents. Check out the design of Honeywell’s FC40 filters - the thicker part is inset and slides further up into the duct and only the bottom inch matches the size of your opening. Fits like a glove. Also, you could just swap out the filter compartment on your furnace to accept thicker filters. This should be a no brainer as you’ll get superior filtration without the flow restriction. If interested in air quality you’ll need MERV 13 or 11 at minimum.

@tempo700 Год назад

Moved into a fairly new manufactured home, where the furnace is located in a closet-like area near the back of the house. The door where the furnace is located does NOT have a vent - it's just a solid door. If I leave the door slightly open, the air being sucked in will shut it. Should that door have a vent on it for better air flow?

@rickytorres9089 Год назад

Very interesting, are there options (other than EasyFilters) to get custom filters though? We got a WEIRD one in our rental that is 3/4 of an inch! It would be like $100 ish dollars per year. To do it so properly as this video recommends (4 times a year for multi cats).

@chibbyylol Год назад

Thoughts on reusable filters? One's that are washable etc. Wonder if one would end up saving some $$$ in the long run

@spinb Год назад

I took out the re-usable filter because I didn't believe it could be 1) a quality filter and 2) truly be washed and not develop mold, mildew, odor, etc.

@Ms.Tete_Alv Год назад

What is the material covering the ceiling of that room? Thank you.

@martinlipka Год назад

I see that your basement’s ceiling is insulated with the silver reflective bubble wrap. Do you have fiberglass behind it? Just curious how you did that (tape or staples) and if it’s beneficial insulation. Does it help with keeping the fiberglass dust sealed? Thank you for the great content!

@SilverCymbal Год назад

Yes, when we looked at this house I have never seen anything like that. My understanding is that its 30 years old and has rated for maybe R9 if I remember. But there is NO fiberglass above it. The walls of this house are also SIPanels so all foam inside. I have never met the family that built this place 30+ years ago but I think that they hated fiberglass since its only in an addttion and garage attic that was done years after they were gone. The foil seems to work ok, and its stapled and taped. Looks like someone spent a ton of time to put it up. Makes me feel like I am on the starship enterprise. I should probably do more on this since it is so odd.

@sibat777 Год назад

I like to put a neodymium magnet close by such things so you can pop the wing nuts on them and KNOW where they are when you come back to them. It’s a great tip fior all sorts of things - drill press for the chuck key, push stick for bench saw/band saws (glued to the plastic push stick and stuck to the body of the machine), glued to cordless drills to hold bits/screws. I could go on and on 🤪🤪🧐🧐. Anyone got any really cool use cases?

@cindymcgrath5698 Год назад

We changed our filter every 3 months. Then we got a long haired cat and had to change to every 2 months till she died. We are back to 3. I put the date to change on the filter but also on my calendar on my phone. We use a merv 8’s. Hr is correct about the use of higher merv’s. Some furnaces don’t run well with higher merv filters.

@jpkaram2780 Год назад

SC: thanks for another great video. Question for you: should I keep my furnace’s fan on at all times? I was told to do this to help with circulation, humidity control etc. Seems excessive but would really like to know your thoughts.

@theguywiththehat99 Год назад

That's exactly what we do. It acts as a full home air cleaner and with a slightly better filter it can filter out common allergens as well. Definitely watch replacement times though - we once had our A/C ice over due to restricted air flow!

@stevecurcio1204 Год назад

Can you do a video on the K and N home hvac filters?

@hotshotsbydonphotography9376 Год назад

That’s what we use in our large house. Every 30-60 days I take them out and wash throughly. They collect lots of dirt and are Merv 11. We live in the desert, so we clean our filters often during the summer months. Paying $30 for a reusable saves $$ and the environment from lots of waste.

@KamfaKing 15 дней назад

3M filtrete 1900 - merv 13, but also twice the media as most merv 8's on the market (1,560 sq. in) so they do not clog up fast, or create static pressure build up any faster then the typical merv 8. Oh, but they do collect smaller particulate matter MUCH better than any merv 8 on the market (including particulates from wildfire smoke) - which equates to cleaner coils, less work for your motor etc, and FAR better overall air quality in your home. It's a no brainer. My residential HVAC heating/cooling system (Maytag) is close to 20 yrs old. Other than changing out a pressure switch yrs ago, not a single issue. I change the 3M 1900 every 4-6 weeks in summer, 8 weeks when snow is on the ground.

@Loglakeliving Год назад

Great advice ! The filter market is a racket…

@rackum44 Год назад

I buy the cheapest pleated filters and change them every 30 days in the winter time. And I get them 2 in longer where they hang out on each side and they are easier to pull out

@bdhaliwal24 Год назад

What do you have on your basement ceiling? It looks like insulation?

@rogerwilcojr Год назад

I think filter change frequency depends on where your return registers are located. If they are in the floor, or close to the floor, they will pick up a lot more dust and pet dander than if they are located up near the ceiling. My filter is pretty huge and my registers are near the ceiling and I can go a year without a problem.

@johngunther6333 Год назад

Why would cold air returns be near the ceiling?

@rogerwilcojr Год назад

@@johngunther6333 I'd assume so that cold air conditioned air is pulled up across the living space rather than just pulled across the floor.

@johngunther6333 Год назад

@@rogerwilcojr In the northern part of the country, cold air returns are generally installed low, but I guess in the south, they are installed near the ceiling...I live in the north...lol.

@rogerwilcojr Год назад

@@johngunther6333 I live in NW Ohio and mine are near the ceiling. I grew up in SoCal and the returns were near the floor and the supply vents near the ceiling - just the opposite. It was also my job the clean the giant fiberglass air filter several times a year, so I prefer the current arrangement. There are some videos that explain the pros and cons of different locations for both supply and returns.

@henrymorgan3982 Год назад

A non restrictive pre filter on the intake will cut filter change intervals. How much will it cut the interval? That is up to you.

@youknowwhatdaysayinhoe5646 Год назад

If possible, upgrade to the 5" media. Good airflow, good filtration 👍

@tedfisk1211 Год назад

I check the filter on my system every three or so months. When I replace one, I am out to the hardware store right away to always have one in reserve. Sometimes they are not readily available so that is why I shop for them right away. My system takes a 20X25X4 filter and I typically pay $35 for each one.

@james18450 Год назад

How often you change 4 inch filters?

@GerardPinzone Год назад

I wish the 2 inch filters were more common. They filter better and allow more airflow.

@SilverCymbal Год назад

I totally agree with you, its crazy! Those things are really great

@erikj9962 Год назад

I have a 5" thick filter, which I haven't seen anywhere else. My heater is about 25 years old. Previous places I have lived at had 1" filter and they are not the best. Have to trade off the pressure drop and MERV rating, and change them often.

@Blakehx Год назад

You can upgrade the housing to use a 2” or even a 4” thick filter that filters Better and provides better airflow

@ColbyPerry Год назад

What about one of the washable filters, I think K&N makes them?

@shep68 2 месяца назад

Lol. Furnace filter discussions are like motor oil arguments. Which is better? Nobody knows but everybody has an opinion. My hvac guy said the cheapies I have been using are not good and to use the pleated more expensive ones. Lenox recommends Merv 10 or higher and he left me with Merv12s. So I’ll just take the manufactures recommendation and pay the extra $ I guess.