Fusion 360 Electronics for Beginners: Defining Your Board Outline, ECAD-MCAD | Autodesk Fusion 360

Подписаться 251 тыс.

Просмотров 29 тыс.

50% 1

The goal of this Autodesk Fusion 360 Electronics tutorial series is to take the new Fusion 360 Electronics user through their first project, step by step, from beginning to end. If you are new to Fusion 360 Electronics, then this series is for you.
Episode 3: Defining your board outline, ECAD-MCAD
In this episode we explore 4 different ways to define your board outline. Namely, drawing it directly in the 2D PCB editor, creating an independent PCB, creating an associative PCB, and using Edit in Place (EIP) workflows.
Timestamps
1:00 Option 1 Drawing the outline directly in Electronics
ECAD/MCAD Methods
4:00 Option 2 Make an independent PCB from an enclosure
14:40 Option 3 Make an associative PCB from the enclosure
25:24 Option 4 Edit In Place workflow
For those who want to follow along...
Download the Fusion 360 Electronics design files: autode.sk/3OMCKm4
Download the Fusion 360 Electronics libraries: autode.sk/3OpUiob
Need more help on transitioning to Autodesk Fusion? Click here: autode.sk/3zSETKO
►FREE TRIAL | autode.sk/31Sxeef
►SUBSCRIBE | autode.sk/30njGGX
►GET STARTED | autode.sk/30k2DWh
CONNECT with Fusion 360 on social media:
INSTAGRAM | autode.sk/2Enzh8P
FACEBOOK | autode.sk/19jII5A
TWITTER | autode.sk/19jIJXc

Опубликовано:

2 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 28

@ncwolfe 6 месяцев назад

At ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-NCntaivZtw0.html I could not delete the outline. After spending way too long trying to figure out why, I had to go in the Inspector Pane and unclick the "Locked" checkbox.

@davem3325 8 месяцев назад

what a pain in the arse process!

@turnerkirk1920 2 года назад

THANK YOU SO MUCH FOR THIS!!! I've been going INSANE trying to figure out why my Associative PCB (option 3 in your tutorial) wasn't appearing in the original design for the enclosure I am building. Apparently (as you outlined so well in this tutorial) it's because that isn't even possible with the Associative PCB option. And I had no idea at all about this Edit In Place workflow but that's exactly what I needed to know! thanks for saving my sanity. I will be using the Edit In Place option from now on. you rock!

@basicotaku Год назад

How do you make the enclosure you used in method 2?

@pktrela 8 месяцев назад

I googled 1590B2 enclosure, downloaded step file and opened it in Fusion

@JeremyDismukes225 3 месяца назад

@@pktrela thank you brutha

@peteback Год назад

absolutely horrible, useless dimensioning of outlines in the pcb editor. I see why you avoided showing us how to do that and skipped on to method 2... No display of units, no way to dimension lines directly. Line properties doesn't label what is x and y and doesn't allow you to change length of line. What is the point of the tool to draw lines with bends at the same time when you can't specify and lock the radius? Why not just remove the (in)ability to make a PCB outline in the PCB editor completely and force them to use the methods you obviously are pushing the user to use?

@icemarkom Год назад

Feedback: Yeah, getting revisions named properly is important, but in a tutorial video it gets old after 2nd or 3rd time... Consider skipping it for the future videos. Non-trivial duration of the otherwise great video was spent on watching you type the revision names.

@khimbittle7705 2 года назад

Useful video !

@barkster Год назад

sooo confusing but still better than using eagle, now I have to figure out how to get my eagle designs into fusion so that they are all in fusion. The last time I did a pcb they were two different programs and none of my pcb's show up in fusion projects

@ewanp 7 месяцев назад

A link to the enclosure would be useful otherwise theres no way to follow along!

@petermoore9504 2 года назад

Any chance of a video on how to reset the trial period without trashing your personal version. What's the point of advertising a new 1 month trial but making the process incredibly opaque to do?

@gianlucalarocca2886 2 года назад

Hi Method 5 is probably also possible. start with method 2 and finish with method 4 :-) Congratulations on the clarity

@ceasarpalache1045 Год назад

Is this accurate anymore? In the Edit in Place/"option 4" flow I don't see the Edit Board menu item after clearing the previous geometry in the outline sketch. E: The menu item hanging off the board object is gone, but there is a toolbar button. E: This UI is impossible. God forbid an Autodesk engineer sand down a single rough edge in anything they do. I've tried this three times and got it to work once.

@sebastianknoedler4813 Год назад

I'm also not able to use Method 4. There is no possibility to select a sketch for the new board outline :(

@FiniteState23 Год назад

It looks like Edit In Place is a Fusion 360 paid subscription feature now. In trying Method 4, after I inserted the 3D PCB (which I had created from my 2D PCB) into the Enclosure design, if I hover over the Edit (pencil) icon, it says: "Edit In Place // This feature is included with a Fusion 360 paid subscription. Subscribe now for full access to Fusion 360."

@BoeingBrian Год назад

@@FiniteState23 Yup! 😔

@gerhardneumann9503 6 месяцев назад

Hi, I have tried this EIP often, sometimes it works perfect but sometimes if I started edit board the new Profile could not be selected. I don’t understand when it works and when not