Creating an Electronic Component Library in Fusion 360 [Part 1]

Подписаться 10 тыс.

Просмотров 67 тыс.

50% 1

How to create an electronic symbol, component footprint, and 3D package in a Fusion 360 library
Sponsored by: www.pcbway.com
Support the creation of more content like this: www.buymeacoffee.com/WillDona...
Part 1 Creating a Component Library: (this video)
Part 2 Creating an Electronic Schematic: • Drawing an Electrical ...
Part 3 Designing a Board Layout: • Designing a Board Layo...
Blog Post: www.willdonaldson.io/blog/fus...
Components I use:
Arduino Uno: amzn.to/30WTweL
Raspberry Pi: amzn.to/3qI5ouf
Arduino Nano: amzn.to/3mwClIy
Follow me:
Instagram: / _willdonaldson_
Website: www.willdonaldson.io
GitHub: www.github.com/WillDonaldson
Chapters:
0:00 Intro
0:37 Getting Started with Fusion 360
2:33 Adding Components to a Schematic
5:25 Installing Libraries
8:10 Drawing an Electronic Symbol
11:14 Drawing an Electronic Footprint
13:00 Generating a 3D Package
16:07 Linking a Device
Disclaimer:
Links in this description may be affiliate links. If you purchase a product or service through the links I provide I may receive a small commission. This helps support the channel and enables me to pursue bigger and better projects. Affiliate links include no additional charge to you.

Наука

Опубликовано:

2 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 77

@WillDonaldson 2 года назад

May 2022 update: Fusion 360 has changed its UI and the component search function is no longer a pop-up window (as shown at 2:36) instead it now appears as a panel on the left-hand side. See this official Autodesk update video for more information ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-1ubwXFqwMZ0.html There have been some other cosmetic changes to logos and symbols, but underneath the cosmetic changes, everything still functions as shown in this tutorial video Feb 2023 update: As pointed out by @RodStoddard, best practices are to include the parts name and value by adding placeholder text ">NAME" and ">VALUE" to both the component schematic and footprint.

@ameiliaw8191 Год назад

what about minute 13:13 the scene which click the button "Create New 3D model" ??? because that button is not shown in my fusion 360 software, the version of my fusion 360 is : Fusion 360 2.0.15022 x86_64 Active Plan: Student Windows 10 Pro 22H2

@WillDonaldson Год назад

@@ameiliaw8191 I am unable to reproduce your issue, I would recommend creating a post on the official Autodesk/Fusion 360 help forums and attaching a screenshot of what you see in your Fusion software for people in the Autodesk community to better help diagnose your issue. I'm unfortunately not able to offer much assistance on a platform like RU-vid beyond what is shown in the video

@ameiliaw8191 Год назад

okay sir @@WillDonaldson thank you very much for your suggestion

@briandodds Год назад

A simple task of adding apart to a schematic doesn't even work at all now... EDIT: I discovered that using the Command Line and typing ADD brings up the traditional parts window and works like in your video. The library manager is still very different.

@ThereIsNoRoot Год назад

This series helped me create my first PCB a few months ago. No one else has a clearer explanation, especially when you have to create your own library and component. I donated some coffee before but I want the YT fam to know that this series is legit. Keep making videos Will!

@WillDonaldson Год назад

Thanks so much for the support Tom! Really happy to hear the video was useful for you!

@MrCfaddis Год назад

I watched hundreds of instructional videos on RU-vid. Will Donaldson's are head and shoulders above all others!

@bikerguitardude Год назад

Thanks! That was a huge amount of extremely useful information for this new 360 user!

@WillDonaldson Год назад

Glad it was useful! Thanks for the support!

@kevinmcaleer28 2 года назад

This is a great video - just what I was looking for. Thanks Will!

@mengdewu678 Год назад

I was a Altium Designer user. And now you helped me for the most important part to go into Fusion 360. Thank you so much for this great help.

@WillDonaldson Год назад

Glad it was useful!

@mengdewu678 Год назад

@@WillDonaldson It’s one million times helpful than Autodesk official tutorial for this part. They should feel thankful for ur contribution to the community.

@kenjichanhkg 2 года назад

Thanks! I love the video! It's exactly what I wanted to watch!

@b9boy Год назад

BEST tutorial out there on this topic. Thank you.

@tinkerman1790 Год назад

Thx for sharing this great educational video!!!

@radsuer Год назад

This helped me a lot. Realy a lot. I am used to watch totourials - and yours is definitly gold. calm voice - everything gets mentioned once. i like your workflow. you help me a lot with my 6 axis robot arm :D

@alvinjunier6644 Год назад

When I need to make a pcb. I always follow this tutorial series. ALWAYS! thank you man 🙃

@lostboyslab Год назад

Great video. Also must say PCBway is a great supplier, superfast and great quality. Thanks.

@UbberMapper 2 года назад

This is an excellent tutorial. It will be very helpful for me.

@_dionisio 4 месяца назад

Very good quality video, thank you

@musabmutawakel2681 2 года назад

You are awesome . Thank you for your help

@vondarycrentsil9180 3 месяца назад

Watched till the end, and as a beginner it was very easy for me to understand and use in my project, thanks

@davidhummel4496 7 месяцев назад

Well made!

@timmy9le 9 месяцев назад

This video is awesome, thank you so much!

@s.vcorazon7162 2 года назад

fantastic! and a fellow Aussie! Thanks from Adelaide

@rafaelfrade1528 Год назад

great tutorial Bro

@Rostfrei_chi_chi Месяц назад

thanks for the video

@juandyman_en 2 года назад

This is a brilliant video, very complete for beginners like me 🙌

@WillDonaldson 2 года назад

glad it was useful!

@antonioferreiro 10 месяцев назад

Really good video. Thank you very much for the tutorial. Will use this in my netx project.

@hartono_motor_channel 2 года назад

Thank for your information

@robinp.9886 Год назад

Merci, très bien expliqué ;)

@new_comment 10 месяцев назад

Fusion 360 is an incredible ground breaking software

@luthfiaminulloh8177 2 года назад

Very useful video

@yahya-i3k 4 дня назад

Thanks!

@Shelorygod Год назад

thanks, this was very helpful and now i made my first PCB component thanks to you (its the exact same as yours but still)

@forrestjone3855 4 месяца назад

Thanks a lot

@KenSellers 2 года назад

Your vid has a lot of necessary details that the official Autodesk videos lacked - thanks! I would have named pin 1 1OEN (N for Not) or 1OEB (B for Bar) to retain the information that the datasheet conveys by putting a bar over the OE (that it's an active-low signal).

@WillDonaldson 2 года назад

Great tip! That isn't something I considered but will implement in my future designs!

@Will15500 2 года назад

@@WillDonaldson You can also put an exclamation mark before 1OE, and Fusion360 will interpret that and put a bar over the pin name. So you would type !1OE, to get 1OE with the bar over it on the symbol pin.

@omkarbhatt2729 Год назад

Hey Will, Thanks for making this tutorial. It helped me out a lot. 😁 It would be great if you'd share the files for some of the components that you created (ESP8266, Potentiometer, etc.) Also, it would make this course absolute if you describe how to make custom PCB board outline from a DXF, importing other 3D models in a 3D Package and making custom copper pours for different regions in the same layer. (A great idea for an advanced tutorial)😄

@XXXXIndices Год назад

Thank you, I am experiienced with Fusion360 for making models for 3D printing but did not know where to start with Electronic PCB design. Just this video has got me a long way into the project I am working on. Just one little suggestion, try to slow down when you select icons etc, it is not always obvious where you have gone with your pointer. I had to replay many parts a number of times to work out what you clicked on. Doesn't help that Autodesk keeps updating and changing stuff. Not critizing just trying to give some positive feedback, Once again thank you.

@WillDonaldson Год назад

I'm really happy you found it useful! And yes, some of the cuts in editing were a little fast, I appreciate the feedback and will keep it in mind for future tutorials

@techtopics5782 Год назад

I like your video. Well done tutorial! I see Autodesk made the making of a custom part intuitive... That is sarcasm.

@juniorlucival 7 месяцев назад

how about pin direction in symbol?

@robstoddard9521 Год назад

You forgot to add text with ">NAME" to provide the part's name. You also forgot to set the part's prefix. The ">NAME" text should be in both the schematic symbol and PCB footprint in the library. To create elements with a value, you also need to add text that says ">VALUE" in both schematic and footprint.

@WillDonaldson Год назад

You are absolutely correct, yes I should have done that. I've updated my pinned comment to include this for others to hopefully see as well

@AndreaNassisi Год назад

Hi, this is a very good 3 parts tutorial for beginners. However, I wish you have another video on how to create a library component from an Eagle design. Maybe the ESP8266 you used in your project. I looked across RU-vid and all the videos I found just show Eagle to Fusion 360 3D models, none of them shows how to make an electronic component.

@WillDonaldson Год назад

Hi Andrea, thanks for your support on BuyMeACoffee. Honestly, I am a little rusty on Autodesk Eagle, I haven't used it in a few years and even then I only did a couple projects with it. I would probably not be the best person to create a tutorial for it, but I know there are a lot of parallels to Fusion. Sorry I don't have any specific advice, but you may find tutorials from the official Autodesk YT channel useful: ru-vid.complaylists

@L3oMatchu 8 месяцев назад

Is it possible to add arrows to a component design?

@giantbrain5793 Год назад

Thank for Great Tutorial. I want To ask ,How Add 3D packet like Hi Link HLK-PM01 Ac to DC 5v but in 3D Package Generator No one Similar with this package.thanks

@robasaurus7064 Год назад

Excellent videos! Can I ask why you turned on the grid when you created the symbol? It doesn't look like you drew it to scale and it doesn't seem necessary.

@WillDonaldson Год назад

Mostly force of habit, but you are right, the symbol is not drawn to scale. The grid helps me visualize even pin spacing but it is definitely not required

@qzorn4440 9 месяцев назад

How can AutomationDirect PLCs, switches, HMIs, air cylinders, etc. be imported into Fusion 360 to make schematics and machine layouts? 😎 Thank you for the interesting video.

@KoenBrader 10 месяцев назад

The F360 environment looks so different now that the video is unuseable. Maybe you could update it for the new Fusion menus?

@czei Год назад

Really well organized tutorial, thank you. The library manager seems to have changed since you recorded this, as the GUI looks nothing like what's shown here : -(. I'm struggling to figure out how to just import the 3D model of a part into the library. The library manager does NOT make it obvious where that information is stored or how to import the model.

@WillDonaldson Год назад

I agree, it is not intuitive or optimized, I generally create a folder for storing 3D models and then link my component footprint to one of those models. There is no way (I am aware of) to import an external 3D model directly into a library

@globevandaldesmazes7815 2 года назад

Will, Love your videos quick and thorough! I am having a tough time trying to import Eletronic components with the symbol, footprint and 3D model that I downloaded from ultra-librarian that weren't anywhere in the Fusion library. I'm trying to save time from having to make all of the parts that I need as opposed to making each one from scratch. I am on a PC can you help me out or make a video showing how to do that I've combed through Autodesk to get help but cannot find any answers. Thanks for any help or resource you can refer me to.

@WillDonaldson 2 года назад

To be honest this isn't something I've done often as I usually build from scratch if I can't find the component I want within Fusion. I'm quite busy at the moment and don't know a smooth workflow for this off the top of my head. If I find the time, I will experiment and add my findings in a new comment. Or maybe someone else who sees this comment and knows the answer can reply?

@toasty-tato 2 года назад

I recently found a workflow for importing that worked for me. For footprints, I download the library the. 1. Import it into my Fusion team database. 2. Create my own parts library (for e.g. my_IC-Digital). 3. In my library, I can import the component from the downloaded library that's in my Fusion team. 4. In my ECAD, I'll grab parts from that library I made. 5. For 3D models, I do a similar process of importing the model to Fusion team. 6. In the device, I create a new empty 3D model. 7. Drag the downloaded 3D model into this file and align to footprint, optionally unlink it so you can delete the original import to avoid duplicates. Basically I have my own libraries in Fusion teams that I use whenever I import footprints online. Hope this helps

@alexgazzard3918 Год назад

I find the process of adding components tedious and time consuming for what I’m trying to achieve. I could manually draw out the 3 headers I wish to use faster than the available processes. But the appropriate options for manually laying out pads doesnt seem to exist at the end stage of “pcb design”

2 месяца назад

Could you show how to manage with real life footprint design? For example I couldn't find LM2596S component, but its footprint. Should I create my own library even if many other components base on the same footprint and 3D package? If yes - how to import them under Fusion/Electronics? The Eagle had scripts to do so. Probably for this component I have to crate my own pad shape. Ok, I can use polygon option for pad creation, but every segment of it requires manual transformation. There is no option to move polygon using mouse. There is no option to align polygon to pads or set distance from pads. If you want to do it - every segment of polygon must be calculated and typed in manually. Consequence is - when you doesn't want to spend whole day creating customized footprint, the task becomes impossible. Every application such as Adobe Photoshop, Adobe Illustrator would allow to create foot print in a minute. The same task under Fusion takes a day. It seems that creating your own components, which utilizes none standard shapes requires to spent hours instead minutes.

@coolestkittay 2 года назад

How do you dimension the symbol and footprint? My footprint ended up being much longer than the 3D component

@WillDonaldson 2 года назад

For both the symbol and footprint, I use the default grid settings as shown at 8:57 and 11:40, respectively. For the component footprint, my grid is a 1.27mm spacing, so by placing the PTH pads two grid lines apart the holes will be spaced 2.54mm as is standard for DIP-packages. Refer to the dimensions given on the datasheet if you are modeling a different component to me. Alternatively, the issue may be that the 3D component you selected in the package generator looks similar but is actually an SMD version (surface mount device) as opposed to a through-hole component

@coolestkittay 2 года назад

@@WillDonaldson thank you Will!! I will look into this. Your videos have been super helpful

@averystablegenius 11 месяцев назад

Do the changes to Electronic Component Library creation in the July 2023 release warrant a new video?

@DAIMANization Год назад

Well good! What I haven't seen though. Like I wanted to use this to design a cabinet, But then map out any of the components I use inside the cabinet, And workout the best placement. And being able to move objects around, plan the wiring route, Fan placements, Can you do that with Fusion 360? I've not seen anyone use it like I'm saying? but I've seen them do the aspects of what I'm saying. Like this video for instance, I didn't know you could have electrical components, But is that so you can build a custom a case and test how that component fits and so on? I haven't seen anyone do that specifically but I'm under that impression. I have been pointed to this program when I've explained it to someone. Because I'm unsure of the terminology they use to describe such programs' other than ''CAD'' Even then its all different categories. This program & Shapr3D on the surface is doing what I'm looking for.

@joblessalex Год назад

Man, that looks horribly annoying to build one component lol. All I need to do is just change an existing parts labels but it doesn't let me...

@WillDonaldson Год назад

You can customize an existing component. I didn't show it in the video but at @8:47 instead of typing a new symbol name, press the second button "import". You can then import an existing symbol and edit the labels. Similarly you can do the same process at @11:26 to customize an existing footprint. You will need to still create a new component by linking the symbol and footprint as shown at @16:26 onwards. Still a bit of work to do, but easier than creating a component from scratch