Just discovered your channel and I'm really impressed. This deserves so much more attention. This is a superb source of well explained and concise Fusion 360 advanced knowledge... Thank you so much for sharing.
Excellent. Also excellent tips on selection filters for menu bar. I cannot believe I have not seen or used before, but awesome with the quick and easy access to toggle off and on. I wish could do this kind of wave on curved organic 3-dimensional, curving in several surface/solid with similar method, but I think cannot yet in Fusion 360. Anyhow, great and very useful method you demonstrate. Thanks a lot.
Dude i use to power carve ocean top, trinket boxs with this pattern, Even done two mirrored sliding wardrobe doors with this pather. any way, just got a cnc, and this video is gonna make doing my boxs sooooooooo much more affordable, thank you soooo much !!!!!!!
Thank you Sir Kristian. Do you mind explaining the purpose of the replace face at the end? Is it basically to join the surface loft with the solid rectangle?
Learned a lot, thanks so much for this! still kinda new and just wanted to ask, is this texture possible to wrap around a body? say i'd like this wavy texture to wrap around with my vase body. Would that be possible? kind regards
Fusion is not good at "wrapping" geometry that is more mesh modeling like Blender. If the body is a simple cylinder I can think of some ways but for a more complex shape Fusion is not the best tool.
Then i created the video I couldn't get a rectangular pattern to update then moving the spline. With the new possibilities with driven dimensions I could be a nice addition to the workflow.
Very useful way to make the wavy wall. Thanks! However I found that if our end goal is to export it to a CNC and make a parametric wall, I found that the lines on the "Z" axe are not 90 degrees. Without a CNC of 5 axes we can't carve it. Anyone solved this?
It starts with a question or I see an interesting shape. If I can see a good starting point I'll give the design a try and sometimes an interesting workflow evolves :) (yes it takes a lot of trial and error)
Thank yo :) Setting it up for a cylinder would take some work, and I don't know if Fusion will tolerate the geometry. So I have no good answer for that now.
Any hint for if the relief isnt changing after moving the swipes? It only works before i created the patch. When i move a spline, fusion seems to do something because the fan of my laptop is running high, but nohting is happening
It works for me. It can be that your computer/Fusion is stuck in re-computing the model. Or you can force a re-compute (CTRL-B) and see if the model gets update then.
I've been toying with the idea of modelling a parametric ammonite (the classic fossile) in Fusion. But this far I've only ended up confusioned 😅 Fancy giving it a try? 😃
Great video Kristian! I'm new to this but i followed along and really enjoyed the process! I have a small project coming up in the near future where I would like to make shapes like these but i want it to go around and connect a cube. Do you know how to make a sweep go around objects and not only be on one plane? Thanks in advancem, love from sweden!
Thank you. I don't have any good workflow for "wrapping" this pattern. Fusion is not the "best" tool for shapes like that, it's more a mesh modeling thing. You have do som trial and error and get a feel if the time it takes is worth it in Fusion or you should start learning something like Blender.
@@KristianLaholm Jag insåg att du var svensk efter att jag kikade lite nogrannare på dina videos! Jag lyckades med det jag ville närt jag kollade på en av dina andra videos där du gjorde typ en pennhållare. jag är dock väldigt grön på detta och du verkar ju vara Mr. Miyagi när det kommer till detta, skulle jag kunna skicka en fil till dig bara för att se vad du tycker och tänker? Betalar mer än gärna för besväret! Lars
Thanks for your great video. I'm trying to select the line in the create "Plane at angle" and it won't allow the selection. Can select the box lines or Origins. Does anyone know why Fusion 360 won't allow this? Thanks
Thank you. It you can't select any lines check selection filter/priority. If you can select other lines, did you create the line using the normal line tool or spline? More then that I can only think of save work and restart Fusion cleaning up any cached geometry and try again.
@@KristianLaholm Howdy :) I used the normal line tool. I tried saving and restarting, no change. When I select the line, then open the "plane at angle" it deselects the line
@@nathanking2484 It works for me. I did the first sketch and hade no problem selecting the lina and do a Plane at Angle. Then only more thing I can think of doing is starting over with a new design and sketch.
@@nathanking2484 Yeah it worked for me. I don't know if this link will work but I made a public file with 2 frist steps in workflow (the has no bodies only sketch and plane). a360.co/3qhD6u7