FX Crown MKII Full Disassembly - FX Masterclass 

Dang, you are good. Take me a week to get it back together lol

Happy Easter to you and all others at FX.

Well done! Thank you. 🙏

Good hunting👍👍

My dream gun😍😍

Brilliant video Ernest, I to would like to see a tear down of the new FX Maverick, I’m a techie and a bit of a fixer, have been doing it since I was a toddler when I broke my first rifle, a 30/30 replica cap gun 😂 just to see what was inside! Recently got my new Maverick and want to look after it and maintain it, a video on that would be much appreciated. Chris UK 🇬🇧

Nice love 😘😘😘😘

Can you do one of these videos on a maverick 👍🏻

hello sir, is there a video about changing the mk2 or the impact x reg ?

Exceptional video. On the transfer port power wheel on the opposite side of this power wheel there is a screw with a set screw.I noticed you did not remove the set screw,is there any reason why this is not removed. If/when this set screw is removed as I have done to totally clean the body & replace all o rings & replace all the bolts with stainless steel from Newman from 910 airgun tunning, can you please advise me on how tight do you tighten this set screw. I cannot thankyou enough how much your videos have helped me with my FX Crown,as I love tinkering with it. I have added one of your brass hammer weights,HUMA high pressure regulator & hammer spring.Next is FX Slug liner. Also can you suggest a PCP compressor as I am well & truly over my Hills hand pump. WELL DONE AGAIN.😁😁😁😁😁 This video has helped me so much

Another great video. Question: Can the Transfer Port assembly be remover just by degassing the airgun only?

great video, and all the way, in one shot, good overview; PS: that torque screwdriver you used, can you use a normal inch/pound torque wrench?, aka the ratchet style, or do you HAVE to use this precise instrument?

New to Airguns. Can I use the fx impact tuning video to tune the crown mk2?

My New air rifle next tho my dreamline i think

I have mk1 crown ... want to get more power. Any suggestions please. Currently shoots 34 Gn nsa slugs at only 860

I very recently bought a new Crown, but I seem to have a different barrel. Seems like there are 2 transfer ports. Is that a slug port and a pellet port? One is round, the other looks oval and bigger. And if it is, can I properly tune the gun to shoot pellets via the slug port? Thanks in advance, Filip.

Hi there I have a Crown MKI. I am thinking of upgrading to the MKII block. Will the MKI barrel work on the MKII block. Thank you

I need the from stock screw and the little brass cup/washer. Where do I buy one? Please help! P.S. that orange stock is awesome! Where did you get one? I’ve never seen those for sale!

Ernest, one heck of a problem to run by you. Brand new MK2 GRS, loaded it up and lost track of the fact that loaded 2....the gun wouldn't shoot at all. Removed the barrel and one pellet was in there, gun still not shooting. Undo bottle and try to Degas gun, gun won't Degas.....so did I manage to lodge a pellet in the gun blocking the reg? At a loss.

So..I just purchased a FX Crown Mk II and i removed the Rear power adjuster (which has a different type of font on it, its much smaller) and I did not see any springs at all, but the 2 ball bearings were present, did I lose these springs in the process? or are these springs no longer installed in the newest generation of Crown Mk II's? Does anyone know or have any idea? Any help would be greatly appreciated!

First 👋🏾 sup bruh 🇵🇭

👌👍

👍👍

Well…. Im moving all parts from one block to another now. And I can see that there are some parts you don’t touch. Like the one screw under the reg pressure gauge and the one under the screw for the power valve.

What's it mean when unscrewing the bottle and it starts venting but never stops and the threads still feel tight.

Can I bleed the whole bottle through the bleed valve that you bleed the plenum with?

👏👏👏👏👏😁

Am I the only one who got a different transer port knob for my continuum .25? Mine says low, med, and high instead of the low .177/22 and .25/30 I’m seeing everywhere else…

How to repair bent side cocking leaver on FX Crown

Hello, I am interested in this product, can you give me the address to purchase? Look forward to your answer thanks

mechanism is so simple but price is complicated !

🇻🇳🙏👍👍oke

Friends like $$ quanto custa

Poor quality gauge on the Crown Mk2 and Mk2, FX need to upgrade them.