Fx DRS Pro MDT ACC Elite Chassis watch before buying. 

Great video! We appreciate the kind words and look forward to more reviews. Thanks again TalonTunes.

Hello Sir , The MDT chassis does not have to be removed for the tuning as you can access the regulator true the slots on the side of the chassis ( small logo ) and the hammerspring adjustment can be done also with the chassis on you just need a ball allen key to adjust both .

I've been shooting my DRS Pro .25 700 and I think it is Awesome! I have been shooting the H&N 40gr heavy slugs @975 fps with the reg set at 147bar. It has the match grade trigger, slug power and 1:16 slug liner already installed. The trigger is very nice. Way nicer than my M3 trigger. I was able to take it prairie dog shooting this weekend, it is so much nicer to carry than my M3 .25 700 as it has QD swivel cups built in to the chassis, just put on a sling. I don't shoot out to 500 yards like Andy does, but I did take down pdogs at 200 yards. This rifle is perfect for me as I am a set it up to shoot and shoot it guy, no messing around with it, Just Shoot It !

*** NEWS FLASH *** A lot of people want a simple, light weight PCP to just shoot. Seen numerous COMPLAINTS about FX PCPs being too complex. The DRS is the FX offering to that market. Think that FX is also working to address the barrel rigidity concerns that some people have. Many people liked the FX Royale for its simple reliability, I have a 500 and totally agree. I also have a Crown, an Impact and a Panthera and enjoy their tunability. That being said, I have a DRS on order because it is a simple PCP (that can be adjusted to a particular projectile without major disassembly) and shot casually. Just an observation, there are many disciplines and interests in the airgunning world and the manufacturers cater to all of them. It's not realistic to presume that every airgun was designed to your requirements and get "disappointed" when you find out (after you have made a purchase) that it is not ideal for your specific application. Do diligence and your research before purchasing (and a bit of checking how things work - or not - before recording a video on a new to you product). I'm just asking, if you want to shoot really heavy slugs, would a .30 not have been better? Think that the DRS is designed primarily a classic PELLET GUN and that market (hence, the smaller low profile magazine which would allow mounting smaller lighter scopes - YAY!). Think that the PRO version is available for the "maximum crowd" because the (Panthera) valve system can develop the power to drive heavy slugs long distances accurately. It definitely has potential. The DRS might be a good "project gun" for you, for me it's the ideal light weight, simple pcp for stalking squirrels. Sorry that the DRS is not designed to your specifications, each to their own eh! Cheers!

Orion the Iguana Hunter makes Awesome magazines ! They will allow you to use a longer slug than the FX magazine. I have a .25 700mm DRS, the FX magazine easily hold a 46gr H&N Heavy slug, which has a BC of .133 I am shooting the H&N 40gr Heavy slug at 975 fps with the reg set at 150bar.

Love the shirt ,talon tunes 😅 the pcp is ok

Yes, that locks awesome! When I said Awesome I mean on MDT chassi ! It still is to much expensive for what it offer.

If you put the angled guage bracket on with the guage, how do you adjust the regulator, it looks like you would have to remove it so you can take the chassis off, then reinstall it to adjust it, then remove it again so you can install the chassis again and then put the angled bracket and guage back on, that really seems like a pain in the ass

I hope you get around to trying the Epic Two. I am having good fun, and that is in the limited .177 caliber that have its own set of unique challenges, not least no choice in size. But the folks able to shoot larger stuff seem to have a good old time.

I’m getting one for damn sure I know exactly what fx was trying to accomplish with this rifle and I’m in. they’re trying to cater to a larger audience, a simple rifle, no adjustments that can get knocked or bumped set it and forget it The powder burners will appreciate it just watch matts video. It’s not that bad. Tune it naked. And be done.

I love the FX rifles I have , but I will not be getting one of them drs's in the near future . In time they will either figure it out or lose costumers . Too bad , I love the other rifles because of the easy adjustment . I'm shure in a few generations they will give us the one we want . Or someone else will .🤔

I got the angle block which my gun and my mdt chassis is to smal i can not get it seperate them. So my plenum is dammaged and paint dammaged the Hammer spring give it one pull a bit harder dan it will turn .and my fillprobe is lekking 😡😡😡😡 but stops over 200 bars

FX designed this for the 22cal hence why the mag size is pure shite.. great video 😁

Wow almost 3 grand for that airgun and it can't hold 4500 psi 😢 l will keep tuning my 800$ aea challeger pro 25 cal it holds 4500psi easily. And it will shoot 100+ fpe with a 600mm barrel

Fx is making expensive Airguns and putting less options on them, I’m happy with my M3, they should have external adjustments on these for what they cost but I think they’re sacrificing adjustability for the look of a real powder burner, definitely not for me, not worth it in my eyes

U should be able to use the Dynamic magazine I thought anyway.

Single loading not an option?

Tomorrow i give my fx drs pro 700 back broken

HI hope you find a solution to the mag problem ..Will you spect to review the ..MORA .?

Spending your money on a AGT Vulcan 3 is a far better proposition.

If you can Andy,try to get an epic air rifle in your hands,I have the .25 cal with 700mm barrel,so far I can get a little over half inch at 100 using 43 grains slugs

not sure what fx was thinking ... not sure who drs is made for ...

I have no interest in fx anything. If you say Taii PANi or vulcan I'm listening, Buying an FX is like listening to a car salesman, you're getting ripped off And lied too.

IMO Talon Tunes is a joke. 😮

When the DRS was first announced I was interested, the first FX I was interested in. Then came the specs and the fact that it cannot be externally adjusted, no regulator / plenum gauge, low pressure reduce the shot count. Now this is the last pcp I am interested in. Matt Dubber is full of shit. First he went on about how adjustable FX rifles was, now he is all of a sudden about "simplicity" and no need for all that stuff. But he himself added a aftermarket gauge on his drs. He is just marketing FX for brownie points and his pay check.

Can’t believe they excluded the same things on the pro model they did on the basic one. Shameful especially for the price of this thing. I own four fx rifles and they 150% suck azz for how they brought this one to the market. However consumers are to blame. Eh I’ll order it and pay extra. Sure why not.

Why would anyone buy that POS?