Thanks for the info, after getting my impact mkii and I have been shooting for over three years I often wonder if it is a good idea to send it back to the FX factory to get it checked and replaced all the O-rings because it started to leak air a little bit
Can you explain why on my impact it cocks and works fine but when cocking the top sear DOES NOT make contact with the lower sear at all, therefore doesn’t slip off the circle piece of metal? Thanks
Hello, I just received the Impact. After the 4th mag it quit engaging the sear plate not letting the trigger engage. The sear plate can engage by pushing it up manually through the two screw side plate and all works well one time. Do you have a video that you can recommend that may show what might need adjusted to push the plunger back farther to push the sear up higher to allow the trigger to rotate into engagement? Thanks
Hi, hope you can help. My impact was changed to f.a.c. And the safety catch will not work . I think the second stage screw , one at the back is loctited on . Can you talk me through how to get it working. Thanks
Ok thank you. I'm very new to this complicated of a system. I can build a AR platform in no time but this is semi complicated. I don't feel any second stage at all. Mine goes off very very easily.
Ball adjustment does not touch the top sheer it has its own stop pin the ball movement is 0.5 mm the pitch of the screw is 0.8 mm from Justin contact with the pin to one full turn will prevent the sheer releasing The weight of the trigger reset spring is 12 ozs Good video and instruction but get your facts right
can't find allen key that fit my fx impact trigger adjustment, i have allen key 1.5 mm which is too lose and 2mm is too big, cant find anything between.. any help ??
John Donohoe thanks, i figured out that my allen key was not made properly by the manufacturer, i try another set of allen key now works perfectly,, !!
