G10 G20 G30 Full size Chevy Van New wheels American Racing Torq Thrust II Wheels 

Thank you for replying and watching my videos.

Thanks so much for watching. To answer your question YES the spacers will work. But I would NOT recommend them instead I recommend that you use Spacer adapters from BORA they are USA made and forged from high strength 6061t6 aluminum and guarantied NOT to break and fall off. They are a LOT more money about $150 for the pair but your life is worth the money. Chinese spacers are junk. I am NOT a paid endorser of BORA and get nothing out of recommending them except that I steered you in the correct direction. Slip On Spacers (1-29mm) require extended lug studs/bolts which also require you to pull the axels to install longer studs. There should be a full 6 turns on the lug bolt or lug nut to provide adequate thread engagement. www.customwheeloffset.com/store/spacers/27639/aluminum-125in-bora-spacer Cheap Wheel Spacers are Bad! Buy BORA Wheel Spacers Instead ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-JMn0kroAvT4.html Do NOT Buy Wheel Spacers || Watch First ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-d0oCKicw5pc.html

@@ricksteelcustoms3196 My uncle is a machinist and can make them out of good steel and I will order racing lug nuts that are longer. I agree I wont use cheep Chinese crud.

@@joellekarma Awesome bro!

I hear you brother I myself haven't spoken with my father since 2007 and then he died 6/2/21 I don't miss him at all but I wish things had been different. I try to remember the good times but they were so far and in-between. One of the good times is when I was 11 he bought a 1972 Chevy full size G20 that he had converted into a camper and he took my brother and I to the beach and overnight camping in there mountains a couple of times. Anyway it is cool that you also have a 95 shorty windowless van. I will check out your videos, thanks for subscribing! I have a bunch more Van videos coming soon.

I would LOVE to see some video of your vans are you going to post some? If you do let me know thanks

@@ricksteelcustoms3196 I will I’m just looking at getting some audio microphones so I can have good audio with using my phone then I’ll be posting... I’ll for sure let yah know. Cheers

Thanks for posting.

Thanks for watching. This is what I have done to my white shorty van. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-1-HvWK2-n6s.html Spindle part numbers are below 1978 G10 G20 G30 Shorty van gets new wheels and tires G10 G20 G30 Full size Chevy Van New wheels The rear wheels are 20" X 10" with 83.06mm hub American Racing VN5152173 VN515 Series Classic Torq-Thrust II Wheel VN515 Series Classic Torq-Thrust II Wheel Bolt Circle: 5 x 5.00" Rear Spacing: 5.75" Offset: +6 mm Full Polished Finish The front wheels are VN5158873 American Racing Torq Thrust II Wheel 18" x 8" Polished - Bolt: 5x5 - Offset: 0 - Hub Size: 83.06" - Backspace: 4.5" - Full Polished Finish Chevy Van G10 2 and 1/2 inch drop spindles with stock hight springs. And C3 Corvette door mirrors. I installed the 2 and 1/2 offset drop spindles from BROTHERS TRUCK PARTS part number Part #DLS0S0073-87 DROP SPINDLES - OFF-SET 73-87 C10 pickup truck And factory Moog coil springs. Cragars P235 70R 15 brotherstrucks.com www.holley.com/products/suspension_and_chassis/steering_components/spindles_and_knuckles/parts/DLS0S0073-87

Sure Thanks for asking. I am running wheels American Racing Torq Thurst II/Cragar SS 20 x 10 275 40 20 and 18 x 8 on 245 45 18 But If I had it to do over again I would go a little wider on the rear tires because the 275 40 20 is a little "stretched" and I don't like that look. I only used them because I already had them off my 2013 Camaro. So I would go with a 285 40 20 on the rear if you don't like the "stretched" look.

@@ricksteelcustoms3196 awesome thanks for the info they look really sharp🤙🏻

The rear wheels are 20" X 10" with 83.06mm hub American Racing VN5152173 VN515 Series Classic Torq-Thrust II Wheel VN515 Series Classic Torq-Thrust II Wheel Bolt Circle: 5 x 5.00" Rear Spacing: 5.75" Offset: +6 mm Full Polished Finish The front wheels are VN5158873 American Racing Torq Thrust II Wheel 18" x 8" Polished - Bolt: 5x5 - Offset: 0 - Hub Size: 83.06" - Backspace: 4.5" - Full Polished Finish

Did you see my 1978 shorty? I am uploading a new video as I write this. I just lowered it some more in the front. If you sell your shorty and regret it good luck finding another one. If you like the van and don't really need the money I would keep it. They are almost as hard to find as hens teeth.

@@ricksteelcustoms3196 I have seen your 78 and I have been inspired by it to do something with this one. I got it for free practically and I've been wanting to buy another Harley so I've considered letting it go but I think your right I'll hang on to it, I plan on making it look good and pulling my little fishing boat with it. I think the 2 will be a perfect combo.

@@wmike555 That is awesome! I hope you upload some videos I would love to see your van.

@@ricksteelcustoms3196 I just might do that. Honestly I think if I make some videos it will keep me motivated to get it done. I might have to pick your brain a little

@@wmike555 That is true, making videos keeps me motivated. That is why my van projects are coming together so fast. Let me know how I can help.

G10 G20 G30 Full size Chevy Van New wheels The rear wheels are 20" X 10" with 83.06mm hub American Racing VN5152173 VN515 Series Classic Torq-Thrust II Wheel VN515 Series Classic Torq-Thrust II Wheel Bolt Circle: 5 x 5.00" Rear Spacing: 5.75" Offset: +6 mm Full Polished Finish The front wheels are VN5158873 American Racing Torq Thrust II Wheel 18" x 8" Polished - Bolt: 5x5 - Offset: 0 - Hub Size: 83.06" - Backspace: 4.5" - Full Polished Finish

I sold the Craigers and put a set of 17's on it. The 15's do not work on G20 vans. Only on the G10 vans. And I did not drop the gold van at all.

Yes I know. That is why the Cragars will not fit it, the drums is also bigger. My 1989 G20 does not have the bigger drums.