Take a look at this other option from Summit Racing. Summit Racing 1955-1957 Chevrolet TriFive Frame Reinforcement Kit Installation. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-3PMoE9VwAAs.html
Hi there I was wondering about the x-frame? Because I plan to do the same to my two-door hardtop it sat under a tree and rotted out the top and beams sogo and convertible is a good idea for me but I'm not sure if it's safe to drive the car around without the x frame on the chassis please give me an idea I appreciate a reply God bless!
You do NOT need the "X" Frame at all. These cars were very strong and stiff with a fully boxed frame from the factory. My car is a California built car so it has the seamless frame. I drove it 1100 miles all the way from the Peoples Republic of Commiefornia to El Paso Texas as it is now and there was no door rattling or popping open But that being said I do intend to upgrade this frame. In fact I already have, still in the box from Art Morrison a chassis stiffening kit that I intend to weld on. But again you really don't need to do it, but I figured what the hell, I will make a video when I get around to installing it and post it on my channel. So be sure and subscribe and hit the notification box. And in the mean time I will make a video just for you showing the kit I bought. Also I will show you how the exhaust will be routed and to save you money you don't need to buy the complete kit, if you have a Iron supply company near you you can pick up the non-complicated pieces from them to save on shipping costs and from Morrison mark up. Thanks for watching.
I have no idea if they are in Peru I have never been to Peru. If you can't find any you will have to check ebay, I hope you find what you need. Good luck in your search.
I bought the same van same year n the previous owner payed alot of money to have a hightop installed profesionally im lookin to trade someone the hightop for there metal roof they cut off so i can weld the roof back on.
I certainly do not blame you for wanting to do that. Check your local wrecking yards and ask them if you can use a Sawzall or better yet a cut off grinder. I cut body panels off all the time at my local "you pull it." But I'm sure you know that will be a monumental job. Might be better off reselling or even trading for he van you want. I would run a Craigslist ad offering the swap. Take photos of your van put them on there and see what happens. I bought 3 of my 5 vans through Craigslist wanted ads in the auto parts category. Best of luck I hope you find the van you're looking for.
Hey restoring my 77 g10. Been checking out your vids. Lowering mine 4.5 in the front and 6 in the rear. Haven’t got it back yet but hope it all works out. My question is where did you get the new window door seals? My van could use em too!
I bought them on Ebay. But they do NOT make seals for the older vans I think 1980 down. So you need to buy them for 81 and up. Because the wing windows are slightly different on the newer vans. The channel the seals fit into Are a LOT skinnier on the older wing windows. So the newer seals do not fit unless you cut the wing window portion of the seal. Or replace the older wing window with a newer van wing window. The newer and improved wing windows bolt right on and are a direct replacement. Check out my other van windows I talk about the seals and wing windows in them. And thanks for watching!
You might have a lot of issues with a "4.5 inch drop" in the front. I had to replace my front wheels for 17 inch wheels so the rims would not hit the lower control arms. And I had to cut about 4 inches of drip rail out of my lower control arms.
Appreciate the info on the windows. I am hoping to avoid the rubbing by installing tubular lower control arms from western chassis. Also 15x7 wheels and 195 50 15 tires . Small I know…but with Chrome 100 spoke standard dish Daytons . Trying to get it as low as possible without cutting it all up. Classic California lowrider look. It’s a shorty with keystone wheels and had a slight rake. Every time we have the van out cruising… it sure turns heads and always getting comments. All original and shag carpet and velvet on complete interior.
@@Gregslife419 I had 15 x 8 Cragers on the front and they rubbed. So I went with 17's on the front and 20 Torque thrust 2's you can check it out on my other videos.
I have one. I read instructions too!!!?. As I did, overcome the not reading part. All tools needed are supplied. Maybe you should have taken it back for a replacement if you had read the book. You forgot to blead, but not covered in operation, just a man knowing thing. Now I watch part # 2. Your Uncle, I'm one of the like same. A little bit of Love goes a long way. Just words I share with you. I don't get out like I once had. I'm just, I'm not sure, not a hater.
Thanks for commenting MUCH appreciated! Kamala will do for the Country what she did for the US Border absolutely NOTHING GOOD! She had 1 job these past 3 and 1/2 years. On March 24, 2021 Kamala Harris was named "Border Czar" in charge of leading efforts to stem migration across the United States-Mexico order." House Resolution 253. And before that senator Harris was the MOST Leftist ☭ democRat in congress! Her father was a Jamaican-born professor of economics at Stanford University. The Stanford Daily, reporting in 1976, described him as a “Marxist." Like Father like Daughter. She would be even worse than Biden! Vote for her she will DESTROY the USA! Vote for Trump and he will save the USA, the choice is yours. Obama, Hillary, Biden and Harris are the reason WHY we NEED an I.Q. test prior to voting! That would eliminate the ☭ democRat party once and for all……….Trump 2024!
It's obvious God wants Trump to be President..... And it is obvious the democRat party is an ATHEIST Party! You cannot be both a "Christian" and a democRat. Harris is not even African American she is Jamaican and Indian. We are NOT a "democracy!" We are a Constitutional Republic! Too bad Leftist ☭ democRats are NOT smart enough to even understand what our country is! Leftist ☭ democRats don’t care about “democracy.” First they forced Joe Biden to drop out after winning the primaries and then realizing he didn’t stand a chance against President Trump they canceled him. How many ☭ democRats voted to nominate Kamala Harris for President? ZERO! Leftist ☭ democRats are such hypocrites they are ALWAYS saying they are “preserving democracy” and then the DNC and a handful of delegates “install” Kamala Harris and an unknown running mate WITHOUT any public participating or voting in the nomination process. And then Hakeem Jeffries, Nancy Pelosi, Chuck Schumer praise this decision to disenfranchise American voters! At least I was Abel to participate in the voting process to nominate President Trump! If you really care about “preserving democracy” vote Trump 2024! President Trump received 18,159,752 votes in the 2024 primaries, Joe Biden received 14,465,519 in the 2024 Democratic Party presidential primaries. Kamala Harris received ZERO VOTES for President in the 2024 Democratic Party presidential primaries. You Leftist ☭ democRats are being cheated and scammed AGAIN just like the DNC cheated Bernie Sanders and allowed Hillary Clinton to win! If Biden is physically capable of finishing the next 7 months as President then why not the next 4 years? And if he is NOT going to “keep his word as a Biden and run again because he is a Potato then WHY NOT RESIGN RIGHT NOW? Answer because if the would and country could see just how much destruction and damage Kamala can do in the next 7 months nobody would vote for her! Harris received only 844 votes in the 2020 democratic primary to put that into perspective Biden received 19,080,074 NEVER VOTE FOR ANY Leftist ☭ democRats! Trump 2024!
What size Allan Key does the cross beam take by they way? I have this cross beam but I lost the damn key that came with it and now I think I might of really stripped it out and now I am stuck with the cross-beam stuck on it. So I was going to just buy another floor jack so so I have a regular one too but I would love to try and get the blot out.
If you work on cars regularly I would buy another floor jack I myself have 9 floor jacks and never intend to remove my cross beam from the one it is attached to.
@@ricksteelcustoms3196 Yea that was my plan, I really love this cross-beam it works very well but on some lower cars if I do not want to drive them up on some wood I could use another jack to get it started and then use the cross-beam. I guess I will have to wait until Harbor Freight puts the 3t Daytona's go back on sale and just pick up another.
Yea I mean I used a 10MM Hex but it would just not turn and it started to mess it up a little so I just stopped. I will buy a new one and just have both to go along with my 4 jack stands lol
If you're going to do this try it using only 1 bushing so you do not have to grind the hinge. Or grind off the "brim" of the "hat" bushings instead of the hinge.
Hey Rick. Loving the videos..! I also have a 1968 "Scooby" Chevy G10 van. I've shipped it over here to England and it's nice to have a rare good looking different van. My drivers side door upper hinge pin has snapped (looks like 2 places, as the hinge just separates when the door opens) Do you know who sells the pin? Also......I have the 230 or 250 cu 6 cylinder original engine and need a fuel pump. Where can I order that? Obviously from the States, but that's ok. Not a lot of info online for G10's..!! Keep up the good work..! regards, Paul. PS Mine is the same color blue as yours and looks like it's twin..!!
For hinge pin repair please look at this video. Unfortunately they do not make direct replacement hinge pins for these vans like everything else we have to improvise. And thanks to the sub! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-by-5zNJZK5A.html
LOL! Your side cannot even define what a woman is. The inane are the people that voted to put a man in the White House who TWICE said…... My name is Joe Biden and I am running for United States senate! If "Orange man bad" AKA "The mean Tweeter" was back in office the USA would be in a million times better shape than we are under Mr. Dementia Joe "the wrecking ball” Lieden! Mr. Dementia Joe aka “the wrecking ball" Liedens example of “☭ DemocRatic Socialism” is NOT an example of “Failed Socialism” it is an example of “Successful Socialism.” He is following the same game plan as was played out to the full destruction of Venezuela under Hugo Chaves. Venezuela was once a wealthy oil rich country until the Socialist got ahold of it. Now they are starving and forced to eat their cats and dogs and eat out of backs of garbage trucks. Welcome to your new home of the ☭ democRat nightmare! Americans cannot afford any more years of democRat destruction/rule. They MUST be stoped or the damage they do may become irreparable. Vote them all OUT of office or in the NOT too distance future we will no longer have a recognizable country. President Trump donated 100% of his $400,000 annual Presidential income to charity. Did Mr. Dementia Joke Lieden? No, he has been too busy destroying the USA. Joke Lieden is the WORST "Resident" in US history President Trump was the best! NONE of these FAKE 92 "Felonies" would be happening had President Trump decided not to run again. But he, like every intelligent American knows Lieden is destroying everything he touches as is every democRat in office. 100% Of everything was better under President Trump than under the worst “Resident” Mr. Dementia Joke Lieden. TRUMP = HOPE Biden = no hope, no guns, no freedom, no border, no gas, no food, no money in the bank, plenty of illegal aliens, no respect from other countries, plenty of new wars, abandonment of our ally Israel, HIGHER taxes, full blown communism / Marxism, higher mortgage interest rates, higher credit card debt, no free speech, the right to abort babies up to 9 months for any reason etc. etc. Other than that Biden Harris is not that bad............. God help us all if Dementia Joe gets another 4 years we will become a 3rd world country................Trump 2024!
I would say brainwashed TDS inflicted Leftist ☭ democRats have no sense of humor...............But then they elected a man who shakes hands and talks with ghosts, can’t find his way off stage, can’t walk a flight of steps or ride a bike without falling off, puts his foot in his mouth every time he talks, walks like C-3PO in a Biden the clown costume, has the intelligence of a backed potato and is in constant need of a diaper change. The whole world is laughing at him and us for electing such a clown. How is “build back better” working out for you? What has Joke Liden done for you lately? Would you trust him to baby sit your kids, handle your money, drive your car, wear your pants or even train your dog? If “NO,” then WHY would you trust him to run the country??? Leftist ☭ democRats along with their “Resident” are offensive to not only the Constitution but also to the Country. Joke Lieden is the WORST “Resident” in US history. His "Bidenomics" is equal to the black plague catastrophe. He has destroyed everything he touches from the border to groceries to fuel to the housing market to the economy and he is in BIG trouble politically, he is polling right up there with colonoscopies. The good news is Leftist ☭ democRats millennial and zoomer’s have lost the American dream of home ownership/affordability as a repercussion punishment for voting for Joke Lieden! LOL Poetic justice! We see how much Mr. Dementia Joke Lieden has dilapidated in the past 4 years. How much WORSE will he be in January 2030? IF he even makes it that long, which I HIGHLY doubt he will. Then we will be stuck with Kamala Harris who will be many times WORSE than Joke Lieden! Trump, love him or hate him, 100% of everything was better under President Trump! To say Joke Lieden is the "worst Resident in US history" would be an understatement! I'm proudly voting for the "convicted felon." Trump 2024!
You've just solved a 50 yr old mystery for me! @7:40, you showed how the inside door handle doesn't latch unless you push it back. A friend of mine and I were 14 yrs old, and hitch-hiking home from Hollywood to the San Fernando Valley over Laurel Canyon (we were idiots, yes. Snuck out of our houses - parents were clueless) and a creepy guy in a van similar to yours picked us up and tried to kidnap us... dunno what else... and we saw that the door handle inside was removed. Our hearts sank but when he stopped in a dark alley, my friend kicked the door open and we ran away. I don't know her any more but I always wanted to know how she was able to do that! Didn't ask her at the time, I was just happy to be alive. I bet it didn't latch because it wasn't pushed back, as you show. We quit hitchhiking after that! It was about 1972 and I still thank God we got out. 😅 🙏
I was only 5 in 72 I lived in Eagle Rock right between Pasadena and Glendale Commiefornia. I am so glad you and your friend lived to tell the tail. Was the Van driver really tall, like six foot 9? If so he might have been Ed Kemper, Kemper confessed to killing six female hitchhikers in California in 1972 and 1973, as well as his mother and her best friend. The police didn’t believe him at first. They knew and liked “Big Ed” the 6’9″ local man who was always hanging around seemed like nothing more than a gentle giant. That is why I got my License to carry a gun and do everywhere I go, and I trust nobody. Yes it is sad but unfortunately this is the world we live in. The evil people can sometimes look perfectly normal.
@ricksteelcustoms3196 This man was small and swarthy. Honestly, I'm pretty sure it was Angelo Bueno from your old area. Same face - when I saw news photos I recognized him. This was 5 years before the known Hillside Strangler cases and apparently before his partner in crime moved here. But I just bet Buono was already and expert and may not have been caught but for Bianchi. Of course, I don't *know*, but I think it was. God is good. Lucky you to have gotten out of this place. We stay because all my family and work is here, but it even worse now than it was then. At some point we have to leave - we're getting robbed by politicians like Gruesome Newsome and criminals are rampant. Our kids are afraid to go out (for good reason, like above) and only the Woke are being given jobs at this point. And, yes, I'm packing now. I moved to a neighboring county where we are "allowed" to. Just passed the test. Our small towns are quickly getting just as bad as the big cities. I don't know what state you're in but recommendations are welcome! Far from the border I hope!
@ricksteelcustoms3196 by the way, regarding cars - I still miss my 69 Camaro! My dad gave it to me in 1975 - dumbest thing I ever did (besides hitchhiking!) was selling it for a VW Bug because of the "gas crisis"
@@virginiainla8085 My first car was a 1979 Pontiac Trans Am I drove it to high school It was red with black interior. I sold it and bought a 1978 BMW 320-i I literally have only 5 regrets in life. Selling that T A was not one of them don't get me wrong I loved that car, but it didn't have T-Tops. If it did I would still have it. My regret comes from a day or two prior to selling it. I was driving it behind an 78 - 80 year old man in a 1957 Chevy Bel Air 2 door hard top (no post) turquoise with a white top 100% factory condition unmodified and a 9 and 3/4 from 1 - 10 in condition. It was basically in show room new condition. So I followed the man to his house and asked him if I could look at it. and he told me he had bought it brand new. I mean the chrome was like new there wasn't a scratch, dent or ding anywhere on this car. the only flaw I could see on it was on the drivers side of the bench seat. It had a 6 inch split at the seam. Then I looked at the fender and saw the words "Fuel Injection" 1957 was the first year GM came out with F I. I knew even at the time I was 19 or 20 that the F.I. alone was worth $5,000.00 So any way I asked the man if he wanted to sell it and for how much and he told me "My wife and doctor told me I should sell it because I don't see to good any more. and then he said I was told it was worth $5,000.00 then he said but I'll take 2. then the next day I sold my Trans Am for $3,500.00 and bought that stupid BMW! I HAVE REGRETTED THAT EVER SINCE! The only reason I didn't buy the 57 was because I wanted a 57 convertible. and I thought if I buy the hard top I would never get a convertible. It was in this condition and looked identical except this one has black bolsters in the seats the old mans had silver. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-iF2Fzt73F4M.html
@@virginiainla8085 Bugs are Kool! I have a 1966 Baja Bug. But they are NOT anywhere near as Kool as the 1969 Camaro. I use to buy bugs for a dime a dozen I bought 1 for $50 and paid $60 just to get it home. Now you can't touch a nice one for under $10,000.00 I also have a 1969 Pontiac GTO convertible. Check out my other videos I have 26 cars. Not all of them a collectors but most of them are. I also have a 1970 Chevelle SS 4 speed with a 396 big block and original Cranberry red paint with black stripes.
There are only 2 possibilities... God created the universe and all life in it or Nothing did..... If nothing did, then nothing would exist… Life does NOT come from non life, something does NOT come from nothing! "Once you eliminate the impossible, whatever remains, no matter how improbable, must be the truth." - Sir Arthur Conan Doyle … Therefore...God created the universe and all life in it… If you take all the profiteering out of evolution you will never hear another word about it. Darwin did NOT even know what DNA was! Stephen Hawking said....."The universe would not exist if there was a decrease in expansion If the rate of expansion one second after the Big Bang had been smaller by even one part in 100 thousand million million, the universe would have collapsed before it ever reached its present size." "It would be very difficult to explain why the universe should have begun in just this way, except as the act of a God who intended to create beings like us." EVOLUTION IS IMPOSSIBLE, NOT JUST HIGHLY UNLIKELY, BUT IMPOSSIBLE! A simple single celled bacterium has thousands of different proteins… Francis Crick won the Nobel prize for co discovering the structure of DNA. He calculated what the odds would be of getting one protein by chance in the ancient ocean. They are 1 in 10 to the power of 260 and if you want to know how big of a number that is you couldn’t fit that many electrons in the known universe…. If you want to know why that number would look like digitally it would be a 1 followed by 260 zeros. According to the Encyclopedia Britannica… "A simple one celled bacterium “coli” contain DNA information units that are the equivalent of 100 million pages of Encyclopedia Britannica.” Mathematicians say that anything with odds greater than 1 in 10 to the power of 50 is impossible… So it would be impossible to get even one protein by chance, let alone the thousands a single cell would need. PLEASE ANSWER THIS QUESTION! And let.s think about this…. For the first cell ever to exist "that supposedly created itself” on the sterile earth before it died in the span of one lifetime would have had to develop and perfect the process of cellular reproduction because if it didn’t then there never would have been a second cell to continue……IMPOSSIBLE! And Darwins evolutionary process would have stopped right there! How long could man or woman dog or cat monkey or elephant live while they are waiting for lungs, heart, kidneys liver or brain to evolve? Why did “Mother Nature” bother to create both Male and Female if according to Darwinian evolution the Male and Female could evolve independently in violation of his own idea of “survival of the fittest?” How did nothing come up with the idea for the first eyeball when before it none existed? And how did the blind animal hunt for food not being able to see its pray? How did “Mother Nature” come up with the extremely complex design of the ocular nerve? Or the over 60,000 miles of blood vessels in the human body enough to circle the Earth at the equator 2 and 1/2 times? How did this first cell that is made up of distinct DNA code write its OWN code BEFORE it EVEN came into existence? This is ABSOLUTELY IMPOSSIBLE!! Anybody with a functioning brain would/should realize this fact! And atheists believe that not only did this first coli somehow write 100 million pages of Encyclopedia Britannica worth of DNA code to create itself somehow BEFORE they came into existence…. But they also believe the entire universe and all life in it supposedly did the same thing, i.e. came from nothing WITHOUT A MASTER DESIGNER! Someone or something operating outside of the known laws of thermodynamics CREATED EVERYTHING! That someone was God! The moment one becomes enlightened with the truth of God and begins to think critically they no longer have any interest in the fable of evolution. I believe that something created everything and that something was God. Atheists believe absolutely nothing created absolutely everything…. One is logical..... The other is NOT! I confess that Jesus Christ is The Almighty God, the creator of all that is... John 1
What would you say the length of it is at minimum extension? I have a 2012 Impala with rotted pinch welds for jack points (Minnesota vehicle). The pinch welds literally crumble when lifting. I'm thinking about buying this to give myself more surface area to disperse the load. The problem is I don't know what's safe to lift/jack from besides the designated lift points since this is a unibody with no obvious frame. Maybe I could take the pads off and lift with the center beam itself. Or just use a 2x4... FJB
At minimum extension you're looking at 28 inches. If you remove the 2 extensions/outriggers it is 21 inches. You might want to look into having some steal chassis extensions welded to the subframe to the rear chassis. Not sure if they make a universal kit that will work with your impala but it would be worth looking into. Sounds like the safest place to jack would be under the engine crossmember or under the lower control arms with the extensions and jack stands for added safety. Best of luck. And thanks for watching! FJB Lets go Brandon Trump 2024!
It's not safe to believe you can work under vehicle ....you still need the safety of solid support stands ....never ever get under vehicle with the belief a hydraulic jack is safe.
I just went out to make sure, the wheels are 6 inches and the creeper hight is 10 inches. That is the only drawback so if you're working on a car you'll have to lift it higher than you would with a normal low profile creeper. I bought it with my trucks in mind. But it really is worth the money I have no regrets and I will use it on my low profile cars as well, and not sweat the few extra pumps of my floor jacks and I will use my truck jack stands. Or if I am lazy I will use my low profile creeper. But if you have a truck this is a must have.
Sorry I thought you were replying to my Icon Harborfreight creeper video. This Pittsburgh is junk. And after upgrading the casters you will have very near the money you would have in the Icon. So do yourself a favor and just buy the Icon instead. The casters I installed are the same size as the ones from the factory 3 inch and it sits 4 and 1/2 tall.
@ricksteelcustoms3196 what happened with your design did something fail? I just have a Pittsburgh one laying around and the wheels are shot in already have a bunch of random poly wheels so I was just going to replace the wheels if passable
@@durantplayz7111 No, it didn't fail, I thought you were going to go out and buy one and then upgrade it with rubber wheels. So Yes, you can fix yours like this. But I also think you'ed still be better off just buying the Icon as it is MUCH better, and should last you a life time. This Pittsburgh is the worst thing I have boughten at H.F. Knowing what I know now I never would have bought it, or spent another $35-$40 fixing it up, because that money would have and should have gone towards the Icon......
Hey man , you got any social media to be contacted on, wanna show you my car and what you recommend, thanks in advance really wanna do something like this just don’t know the needs!.
@@ricksteelcustoms3196 Thanks my brother for the response but I don’t know how to really post and upload on RU-vid. You have a facebook? Again thanks in advance and enjoy your day.
@@7325TRENT Sorry I don't have Facebook I hate Facebook and Zuckerberg. For that matter I don't have any other account other than RU-vid, and I also hate RU-vid.. Watch this video. "How to post videos on RU-vid." ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-VtF2AgFSLAw.html
I had the exact same van with the same wheels! It was a 1978 G10 shorty with no windows, Cragar S/S wheels, and a 350 motor. Mine was Dark grey though. I ended up painting it to look like the A-Team van.
Thanks for watching! It really is a great creeper! Be sure and check out my video review and upgrade that I did to my Icon creeper. "How to upgrade your icon creeper harbor freight tools review" ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-aBGpSg3Rx0s.html
@@ricksteelcustoms3196that’s kinda disrespectful to atheists. I’m not saying you think this but. Just because they believe in something different doesn’t mean they’re a bad person. Have a good day sir:)
Hello, i have a 69 g10 and im curious if the later model 71 vandura back pop out windows will fit on it. Any chance you would know or be able to find out?
I just so happen to have 4 of the later vans I even did a pop out window conversion on my gold 1981 Chevy G20 Check my other videos to watch it. And I saved the fixed glass. I just checked it by placing it up against both my 2nd gen 1967 and and 1966 first gen and from top to bottom the fit looks just right. But from side to side it is 1 3/4th inches too long. And it is also slightly concave so even if you were to cut the glass and outer perimeter frame down to fit the newly cut glass it would NOT seal up on the right and left side. But, when there is the will there is a way. If you really wanted to fit your van with pop out windows. You can likely take the seals from the later 3rd gen vans along with the stainless and cut and fit it to your original flat glass. But you would have to cut both sides of the stainless to position the pop out lever in the center. And be sure to save some of the stainless to overlap and lock it in place. Or better yet use some double sided foam tape to keep the stainless fitted tot he glass. And then there is an indentation for the inside pop out pivot latch to fit into the door that you will also have to fabricate, or cut it from the pop out donor door and weld it in place. If you do this you will likely have the ONLY first generation van in existence with rear pop out windows and will be the envy of every first and 2nd gen vanner at the van show or run! I may have to do this now..... LOL! Thanks for watching and don't forget to subscribe...
Good to know it's not an impossible task just an arduous one. Literally after I posted my comment, someone finally got back to me on the Facebook 1st and 2nd Gen forums with 3 sets of seconds gen pop outs. But if I can't find one more set to complete my 69 g10 long wheel base I might attempt to make some with the method you provided. Thanks for responding so fast!
I highly recommend using a cast iron that is preheated in the over at 450f, it'll give you an even fluffier pancake! Another trick that will also give good results is to let the batter sit for 30 minutes. This gives the flour time to hydrate and develop a stronger gluten network (called autolyse in the baking community) which in turn helps it rise more.
LOL! You still crying lady........why are you so TRIGGERED? I'm living rent free in your head, it stinks like putrified gray matter in here, but there is a LOT of empty space. Thanks for posting and helping my channel grow. 🤣🤣😂
Yes ma'am, you MUST first "hack them up" in order to FIX them up! Unless you know of another way? Harry Potters wand perhaps? Thanks for posting and helping my Chanel grow!😆
LOL! You back again? You must be desperate for a "pen pal" Problem is I have got better things to do with my time than continue to waste it with a clueless woman such as yourself. Like play GTA! By the way I NEVER even mentioned an "engine cradle." I said "the brand new chassis is bolted to the upper frame rails and there is no and was no gap prior to and after bolting it to the upper frame rails and then the engine to the chassis "I am sure" it is perfect." You do NOT even know what an "engine cradle" is!!!!! FYI an "engine cradle" is a portable engine stand with wheels so you can move it around the shop. Then you mention "airbag timing AGAIN! You are clueless and DO NOT KNOW HOW AIRBAGS WORK! And I DON'T care to wast my time explaining it to you. UNBELIEVABLE! I bet you also troll Surgeons, attorneys, and physicists! Good thing Albert Einstein is no longer alive or you would be criticizing him on his pythagorean theorem. Anyway I am DONE replying to you good bye. PS you're blocked!
I was amazed when seeing an old timer fix his truck like this using a light pole across the street from his house and a come along. Just be sure not to stand too close! If the chain snaps, that ratchet will fly like a canon ball.
That can happen when using a come along with a cable but a chain is much safer especially when pulling something as light gauge steel as upper frame rails using a 3000 pound 1 and 1/2 ton commercial USA made puller like mine. I would NOT recommend using anything like it that was made in China or Taiwan that's for sure. But then again my puller was nearly $700.00 bucks. So for this job my puller was big time overkill. Thanks for watching and commenting much appreciated.....
Your gold van looks like my 94 cuz I have the big van, with no windows except the Popout windows in the back but I don't have the sliding door I have the barn doors on the side. The motor is that a small block 350? If it is let me know the type of intake that you have and the carburetor size and the distributor cap, and the wires, I love the setup on your motor 9:27
My gold van is a 350 my white van is a 305 both have the same Edelbrock 1406 Carb, intake distributor and Accel Spark Plug Wire Set 4048 Super Stock 8.0mm Yellow for Chevy 350/400 SBC. But I had to jet down the carb on my 305 down to the 500 so if your engine is a 305 go with the 1403 or pick yourself up an Edelbrock carb tuning kit. It contains jets, metering rods and springs & instructions. Tune the carb to the motor. But a LOT of people run the 600 CFM Carb on 305 Chevys without any issues. I picked up mine used and it had a worn out throttle shaft so it was pulling unmetered air causing it to run rich "black exhaust smoke" I picked up a rebuild bushing kit just haven't installed it yet, but after jetting it down the black smoke went away. I might just have to jet it back up after the fix. As for the distributor I picked them both up new on ebay for only $50 each and they came with the cap coil and control module. It was a hell of a good deal, eBay item number:252772712164 and the intake manifold is just a 2701 Dual-plane Edelbrock Performer EPS intake manifold $195 free shipping at Summit racing .com
@@TomasMatos1 Congratulations on getting your Chevy Van. I had to sell my Cragars because they rubbed the drop spindle and lower control arms after lowering the front and they didn't fit on my gold van because of the spokes hitting the rear wheel drums even though the lug pattern was the same. So I went with Torque thrust 2's instead solving my wheel rubbing issue and I like the look better than the Cragars. I went with 20 X 10 in the back and 17 x 8 up front. I just wish they made ties that size with raised white lettering. I might try the tire paint. You can check out my other video comparing the Cragars to the TT 2's on my other video. And thanks for watching!
@@TomasMatos1 If you are going to drop the suspension on your van watch this before buying Cragars. "1978 Chevy G10 G20 G30 Shorty van even lower and new Cragar wheels don't fit!" ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Gq8Kv79t_30.html
I recommend people with wrecked cars like this just take it to the bodyshop and let them pull the frame. And then you can do the rest if you want to. Videos make things look easy and when you try and a chain breaks or snaps a rope and you get hurt, then you will be wishing you did. frame pull is not that expensive, its all the other stuff paint and parts that are..
I didn't' paint the doors at all that is the way I bought it. But YES I remove everything from the doors when I paint. take a look. and thanks for posting and watching. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-RpGps2uuXds.html