Spares here: spares.bagnall... Most common leak fix on the inlet valve of the Gamo PCP air rifles. Applicable to the Coyote, Chacal, Boxer, Furia, GX40, GX250, HPA, Phox, Urban and Venari
Can u make a video about how to properly install a pressure gauge because when I install mine, the air is not holding or the air is too much. I’m not understanding how much am I supposed to tighten it?
UK viewer here. I have the Coyote, which is the British version of the Urban. My rifle got a filler port leak when it was about 18 months old, so I asked the gunsmith at the local range to take a look and fix it. Naturally he changed the seals while he had the gun apart, but he reckoned the problem was really just that a tiny bit of grit had got inside via the filler probe, which was probably my own fault by not making sure it was clean. Could this be the cause of your problem too ?
@@Kevin-mx1vi I disassembled the valve and greased the o-rings, and now it's holding pressure well. Also the gauge was not tightened sufficiently. Seems like someone was in a hurry to get it out of the factory and to the shops. Thanks for the tip on contamination, I'll watch out for that.
@@nongmin88 That's great news ! I worked for a (world leading) company that makes industrial testing instruments and I know that the fitters/assemblers are expected to assemble a certain number of items per hour/day/week, so there's pressure to get things done quickly which inevitably leads to it being done less well than you might hope. Seems you got one of those, but at least you got it sorted without any problems. 😊
