Тёмный

Garage Door Parts To Lubricate, Clean - Every Year Use Oil, Grease, or Silicone 

Mr. Hardware
Подписаться 82 тыс.
Просмотров 149 тыс.
50% 1

Lubricate and clean the garage door parts with oil every couple of years. Look at the moving parts of the garage door panels and overhead track system to be lubed.
Lubricate all moving parts with silicone or grease because it lasts longer, and it flows to those active areas - motor oil is fine.
Put some drops of oil on each hinge, bearing, roller, shafts, springs, rollers - but not the nylon wheels.
The extension or torsion spring should be lubricated or “wet.” As it dries, it creates greater wear when the coils compresses under high tension.
Clean the track, then use a light spray of silicone on each side of the track.
Use chain lube on chains, and grease on a screw drive.
Test your springs manually by disconnecting the opener, and a man can raise it with one arm.
The doors very rarely fall closed because there is no tension when the door is raised.
www.mrhardware.com/

Хобби

Опубликовано:

 

29 май 2017

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 60   
@Quartered_Rodent
@Quartered_Rodent 6 лет назад
Thanks Mr. Hardware! My father and I were discussing about the residual oil left on the track of our garage door. You are certainly right it is like molasses. Gonna get hold of some silicone spray and clean that right up.
@MrHardware1
@MrHardware1 6 лет назад
Some of our tips are just common sense, thanks. Blair
@nolanb7150
@nolanb7150 4 года назад
Nice short video that gets the point across. Thanks. Haven't had a garage in fifteen years. Good to refresh the mind.
@ericmartinez4053
@ericmartinez4053 2 года назад
Straightforward and to the point. I really like this kind of presentation. Very well done. Thank you.
@danielmartin3040
@danielmartin3040 3 года назад
Thanks for the video!! Had to learn how replace a spring after a failure a few years ago. Replaced the rollers and added the reinforcing bars while I was at it. I wanted to learn the places to lubricate for maintenance so I don’t have to go through that again any time soon. Very helpful!
@IStink3
@IStink3 7 лет назад
I am going to do this maintenance this coming weekend. Thanks as always!
@latinosomos
@latinosomos 5 лет назад
I like your video, Very simple and easy to understand. I will try it and then see if I remember everything.
@davidw4346
@davidw4346 5 лет назад
My spring was popping, I oiled as you suggested and it fixed it. Thanks
@jhutch8539
@jhutch8539 4 года назад
Thanks for the white lithium spray tip! At a rented house, I had a spring that was so rusted it wasn’t able to be adjusted to balance the door so wasn’t able to safely use the opener. Was able to loosen it up by first spraying WD40 to try to remove some of the rust, but what finally did the trick was working the white lithium grease spray into the entire length of the spring and all over it, doing so a couple times while raising and lowering the door slowly and a bunch each times. I did use WD40 to lubricate the hinges etc but will check out some of the other recommended lubricants here and in the comments for the wheels and hinges etc for when it wears away.
@hoseman10
@hoseman10 5 лет назад
You are the best one yet. You gave perfect detail on what I need to do.
@kilo2823
@kilo2823 7 лет назад
Nice tips, thanks!
@aangelino5835
@aangelino5835 4 года назад
Good and simple. Thanks
@johanzeelie
@johanzeelie 5 лет назад
Thank you very much for this. Helped me allot
@ralfwinter2221
@ralfwinter2221 6 лет назад
Short, sweet and to the point. My job tomorrow is? Thank-you.
@terry7893
@terry7893 Год назад
Great tips and great video! Short, and to the point!
@ezmonnee
@ezmonnee 5 лет назад
Very helpful, Thanks
@noedog
@noedog 3 года назад
Very helpful, thank you!
@vincehewson2665
@vincehewson2665 2 года назад
Thank you from Australia. Concise and easy to follow
@MrHardware1
@MrHardware1 2 года назад
I hope you are living free.
@easygalleryframes
@easygalleryframes 3 года назад
Thank you!
@1chukk
@1chukk 7 лет назад
That's a good one!
@RETard-me4mj
@RETard-me4mj 7 лет назад
Love your videos.
@MrHardware1
@MrHardware1 7 лет назад
Thanks to everyone! Blair
@yhz48188
@yhz48188 2 года назад
Thanks! What product do you use for spring? “Club and Chain” ? Or just any oil?
@brightonmusic
@brightonmusic 6 лет назад
Can I use either the silicone spray or lithium grease on the chain? Thank you.
@MrHardware1
@MrHardware1 6 лет назад
Those are 2 different schools of thought. I like the grease on my garage chain, but on my bike I like silicone.
@jessebuenrostro2080
@jessebuenrostro2080 2 года назад
Can I use lubrication on Galvanized Steel Torision Springs? I used to have coated springs and used lube on that. Just making sure
@MrHardware1
@MrHardware1 2 года назад
I don’t know why not?
@luchatijuanera3636
@luchatijuanera3636 3 года назад
What kind of oil, please?
@cribraga9215
@cribraga9215 2 года назад
Thank you for the video. Have a very rusty garage spring doors. Before applying the oil, do you have any recommendation for how to stop the rust coming back? Will clean the rust before doing anything else.
@MrHardware1
@MrHardware1 2 года назад
Oil not only lubricates, it prevents rust. Keep it lightly coated and it will not rust any further.
@cribraga9215
@cribraga9215 2 года назад
@@MrHardware1 Thank you.
@cynthiathomas8645
@cynthiathomas8645 5 лет назад
What type of motor oil are you using? SAE 30? or 10W-30?
@MrHardware1
@MrHardware1 5 лет назад
I'm using 20w oil, but 30 may have a little longer hang time. The importance is that things are not rubbing metal on metal w/out lubricant.
@TomTerrific
@TomTerrific 2 года назад
I like your little oil can - I'm looking for a link to find it. Thanks.
@MrHardware1
@MrHardware1 2 года назад
It is a zoom spout oiler.
@yhz48188
@yhz48188 2 года назад
What do you use for spring every several year? Biclub and Chain? I am lost. Thanks!
@MrHardware1
@MrHardware1 2 года назад
Oil or grease on the spring, each coating will last years. Light oil or chain lube on the chain and white grease on the ‘car’ driven by the chain.
@yhz48188
@yhz48188 2 года назад
@@MrHardware1 thanks a lot!
@Fishsticks007
@Fishsticks007 Год назад
Thanks -love your Michigan accent! I’m from northern Ohio so I miss it … What about a belt drive formula 1 opener. Should i lube the belt? And if so, with what?
@MrHardware1
@MrHardware1 Год назад
That belt drive is too rare for me to speak about, I’ve never owned one. I would contact the manufacturer, and do what they suggest.
@Fishsticks007
@Fishsticks007 Год назад
@@MrHardware1 thanks! Who knew! I have a collectors edition garage opener! 😂- I just hope to make it last another couple years and sometimes it seems a little bit jumpy. it’s just like a fan belt in an automobile I’ve seen before. Teeth - thank you very much and have a wonderful week
@delighted8481
@delighted8481 Год назад
Thank you for this tutorial. What type of oil did you use?
@MrHardware1
@MrHardware1 Год назад
Any all purpose oil, 3 in 1 or motor oil. The main thing is to use silicone in the tracks, oils, WD40 and grease gum up the rails causing too much drag on the wheels. It is worse in cold climates.
@delighted8481
@delighted8481 Год назад
@@MrHardware1 Thank you kindly!
@MsLetty-dd2up
@MsLetty-dd2up Год назад
My husband put oil on the garage door chain, so when the door was lifted it left oil residue on the front of the door. How do i get the oil off the chain and door.
@MrHardware1
@MrHardware1 Год назад
White DOL
@MrHardware1
@MrHardware1 Год назад
Wipe the excess oil off the chain with a rag. You don’t want to remove it all that chain needs some oil. Either you could use a citrus degreaser or you could use a little paint thinner and a rag to remove the drips of oil off the door.
@MsLetty-dd2up
@MsLetty-dd2up Год назад
Thank you
@Hypurman1
@Hypurman1 6 лет назад
Why oil and not grease?
@MrHardware1
@MrHardware1 6 лет назад
Lightweight grease, Lubriplate is my favorite, is very good, however too many readers will skip the lubrication is the product is too difficult to acquire. I try to keep the videos very short so some side tips are not included. Thanks for the suggestion. Blair
@anthonyfranklin5228
@anthonyfranklin5228 4 года назад
Is it ok to use wd40 on the roller?
@MrHardware1
@MrHardware1 4 года назад
It will work however it will not last. Oil or light grease will last years.
@sparkyheberling6115
@sparkyheberling6115 Год назад
Why does the door have spray foam on it?
@MrHardware1
@MrHardware1 Год назад
I used 200 square-foot spray foam kit to insulate it. I made the mistake of buying a non-insulated door when I built that house.
@YeOldeGeezer
@YeOldeGeezer 2 года назад
Oil will also accumulate dirt! NEVER USE OIL OR ANY LUBRICANTS ON TRACKS. KEEP THEM DRY.
@thurm101
@thurm101 2 года назад
NEVER SPRAY THE TRACK.
@syedjavedahmad9719
@syedjavedahmad9719 3 года назад
please clean the door. it yuky and dirty.
Далее
DIY! How To Lubricate Your Noisy Garage Door
14:25
Просмотров 241 тыс.
How To Lubricate Your Noisy Garage Door
7:13
Просмотров 6 млн
How to Lube your Garage door
6:26
Просмотров 1,3 млн
Garage Door - Air & Bug Sealing
17:39
Просмотров 1,3 млн
The Shocking Truth About Ceramic Knives
14:53
Просмотров 495 тыс.
How gas pumps know when to turn themselves off
13:56
How To Lube A Garage Door
5:37
Просмотров 605 тыс.
How these impossibly thin cuts are made
9:37
Просмотров 11 млн
Будни пекаря. Часть 6
0:59
Просмотров 4 млн
Самый ДОБРЫЙ мальчик!😎
1:00
Просмотров 6 млн
СВАДЬБА МОЕГО ЛУЧШЕГО ДРУГА
0:24