Gas Dryer Ignition Systems and Gas Dryer Valves - appliance repair training webinar excerpt

Подписаться 32 тыс.

Просмотров 6 тыс.

50% 1

Ever wondered what the inside of a gas dryer valve looks like? And what's the purpose of having two separate valves in one component? What about those mysterious "safety" and "booster" coils? What are "split coils"? This is an excerpt from a longer webinar where we explain how gas dryer ignition systems work in detail. Once you understand how these systems work, you can diagnose gas dryer ignition problem operationally-- that is, by watching what it does and doesn't do: Does the ignitor glow briefly and then go out? Does the ignitor not glow at all? These are clues that point to specific malfunctions in the dryer ignition circuit.
Want to see the full recording and become one of the tech elite who know how to easily troubleshoot linear compressors? Premium tech members at Appliantology can watch the full webinar here: appliantology.org/topic/63109...
Information on becoming a premium tech member at Appliantology: appliantology.org/blogs/entry...
Full list of webinar recordings at Appliantology available to all premium tech members: appliantology.org/announcemen...
Enroll today at the Master Samurai Tech appliance repair school for top-notch online appliance repair training and a FREE premium tech membership at Appliantology.org: mastersamuraitech.com

Опубликовано:

24 мар 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 9

@eberelias 2 месяца назад

Is the operation of the range gas valve the same?

@AppliantologyOrg 2 месяца назад

No, completely different. Ranges use Hot Surface Ignition system where the ignitor is in series with the heating coil inside the gas valve. Dryers use a split coil system where wattage to the ignitor is controlled by the radiant sensor.

@ausseamore8386 8 месяцев назад

Thanks very much

@spinny2593 11 месяцев назад

@spinny2593 21 minutes ago I have checked everything continuity good on all fuses and well everything. So I changed the coils. You are the only one that talks about the metal sleeve. The small one in the back does not have one and I can't tell anywhere if it should or not. I have done everything and it still will not heat. Get my glow and then click it shuts off and nothing.

@AppliantologyOrg 11 месяцев назад

Sounds like failed valve coils. Easy and inexpensive fix.

@spinny2593 11 месяцев назад

@@AppliantologyOrg I changed them already

@AppliantologyOrg 11 месяцев назад

Ah yes, you said that and I missed it. Start a new topic in the DIY forum at Appliantology and we’ll help you troubleshoot it there. appliantology.org/forum/60-diy-appliance-repair-help/

@mostlikelywedoitservices6926 2 года назад

MST Schematic Workshop Webinar 10-22-2015. I am lost looking at the wiring and the why with so many direct points of wire connections and then adding in the holding coil. The major question is why and how. And I am clueless on how to do it while I am logged on as a paid member to as this question.

@AppliantologyOrg 2 года назад

This is just a 4-minute EXCERPT of the entire hour-long video so it’s natural you would have questions. You should watch the full webinar here: appliantology.org/topic/63109-mst-office-hours-5222017-gas-dryer-ignition-systems/ If you still have questions, post them in that topic I linked you to above. From the title you gave in your post, it sounds like you’re referring to a different webinar recording altogether. You can find that webinar at Appliantology and post your questions in that topic.