How to Fix a Gas Dryer That Won't Heat

Подписаться 119 тыс.

Просмотров 1,1 млн

50% 1

Read the written version of the troubleshooting here: www.searspartsdirect.com/diy/...
Use promo code RU-vid to save 10% on www.searspartsdirect.com/
This #diy video from Sears PartsDirect shows you what to do if your gas #dryer doesn't heat. Several things could be keeping your dryer from operating normally. You could have a broken flame sensor, gas valve coils, high-limit thermostat, operating thermostat, thermal cut-off fuse, thermal fuse, igniter or timer. This video shows a few easy tests you can run, including how to use a multimeter to check for continuity between these #parts and locate which component is causing the problem.
1. Check the gas supply.
2. Check the burner igniter.
3. Check the gas valve coils.
4. Check the components in the control circuit.
5. Check the high-limit thermostat.
6. Check the operating thermostat.
7. Check the thermal cut-off fuse.
8. Check the thermal fuse.
9. Check the timer.
10. Check the igniter.
11. Check the flame sensor.
If you made it all the way though and you still haven’t found a problem, you could have a defective motor centrifugal switch or a wiring failure in the heating circuit. You would need a service technician to check this out for you.
Visit us at:
www.searspartsdirect.com/diy/...
Or call 1-800-437-1673 to speak with a parts specialist.
The video includes these parts and tools. Look up your model to make sure you get the right parts for your dryer.
Flame sensor
www.searspartsdirect.com/part...
Gas valve coils
www.searspartsdirect.com/part...
High-limit thermostat
www.searspartsdirect.com/part...
Operating thermostat
www.searspartsdirect.com/part...
Thermal cut-off fuse kit
www.searspartsdirect.com/part...
Thermal fuse
www.searspartsdirect.com/part...
Timer
www.searspartsdirect.com/part...
Igniter
www.searspartsdirect.com/part...
Dryer lint brush
www.searspartsdirect.com/part...
Multimeter
www.searspartsdirect.com/part...
Find parts for your dryer at www.searspartsdirect.com/part...
Or click here to schedule an appointment with a repair technician. www.searshomeservices.com/rep...

Хобби

Опубликовано:

18 май 2016

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 382

@buckbuchhagen726 4 года назад

This excellent video enabled me to fix my girlfriend's Kenmore dryer (same model as in the video) for $5.77 (thermal fuse) instead of $200.00+ that an appliance repair company would have charged her (incl $150.00 for simply showing up). She even considered buying a new W/D combo for $1,200.00+! I bought a multimeter for $6.00 and followed the instructions in the video. Simple! If I can do it you can, too! Thank you!

@sammarchetti2484 2 года назад

To be fair, trucks, gas, insurance, employees , and equipment, uniforms and benefits aren't free. There's nothing simple about sending someone to your home to help you

@ericerto8250 Год назад

This was one of the best get straight to the point video. This was geared towards people who have knowledge of how things work. I wish all other videos were like this because other guys get way to in depth and take 30 minutes to this. I loved it it made my life so much easier

@jeremiahdillard9201 2 года назад

This is the clearest, most concise video on YT for dryer trouble shooting! Thanks a million!

@bnsdesign 5 лет назад

The PERFECT video to diagnose a dryer problem...THANK YOU. Perfect step by step explanation of the parts and how to troubleshoot. Wish I had found this one before watching half a dozen other ones.

@searspartsdirect 5 лет назад

Thanks for the feedback. We're glad to hear that our video hit its intended mark in helping you understand gas dryer troubleshooting tactics.

@TheRoadoilers 7 лет назад

Logically organized and clearly presented. The steps begin with the easiest tests (least disassembly) and progress to the more difficult ones. Excellent!

@Big_Island_Boi 5 лет назад

I wish there was a troubleshooting video this good for EVERY type of appliance. Great job.

@searspartsdirect 5 лет назад

Thanks for the encouraging words. We're continuing to work on many new appliance troubleshooting videos.

@chrisganahl9421 6 лет назад

This video is amazingly easy to follow, yet very thorough. Another video told me to replace the gas solenoids, but luckily I also watched this one and discovered I had a bad thermal fuse. You need a multimeter and a bit of familiarity with the ohmmeter function (I had help), but the fix was relatively easy, as far as appliances go. Thank you, Sears, for creating a perfect video.

@vubot1 4 года назад

For the 219th time, best repair video on youtube.

@stephencarlsbad 7 лет назад

This is hands down the best dryer troubleshooting and repair video on youtube!

@josephperri901 6 лет назад

stephencarlsbad e

@andrewhughes5845 6 лет назад

Replacing dryer belt

@totallyfrozen 5 лет назад

It sure helped me!

@Arcturian1111 3 года назад

Yes amazing.

@MichaelBethel 4 года назад

This was absolutely the most straight forward, clearly articulated troubleshooting video I have ever watched. After watching, I had the game plan clearly in my head and had my dryer diagnosed in 10 Well done! Thank you.

@searspartsdirect 4 года назад

Thanks for your comments on our video. It's rewarding for us to see that our hard work payed off and that you got the help you needed to diagnose the dryer failure yourself.

@beribear7956 7 лет назад

I've seen about 10 videos on this topic and this by far is the best one. Thanks so much.

@Kagemoose 7 месяцев назад

Excellent straight to the point, no stupid music, clearly shot, and in an order from easiest to get to to harder.

@paulroyer02 5 лет назад

Absolutely the best dryer diagnostic video out there. Great job Wayne! Thanks!

@smokemadbuds991 Год назад

This guy crushes it as a service tech. They dont get much better

@ayedurand 5 лет назад

I need Wayne on all of my repair videos. He's excellent.

@searspartsdirect 5 лет назад

Thanks for the positive feedback. We're glad to hear that you liked the video.

@FarmerBrutus Месяц назад

It WORKED! Dryer wouldn't heat. The igniter was fried. Changed that out, but it still didn't heat. Went around back and checked the thermal fuse. That was dead too. Changed that and got the dryer working on Mother's Day! Thank you for the EXCELLENT repair instructions!

@Just-E536 7 месяцев назад

This is such a great explanation! Please bring Sears back to its glory days!

@stevemcmahon7921 Год назад

I was able to fix my dryer that didn't have any heat after watching this (It was a bad thermal fuse). Thank you for such an excellent breakdown!

@brianbreslin5436 7 лет назад

Fantastic video. Very clear instructions and comprehensive...more importantly, my dryer is back and working!!! Thank you.

@craigfritz5411 7 лет назад

Best video. After replacing the wrong part twice I watched this and isolated the problem to the timer. Replaced it and we're rockin again. Thanks Wayne.

@searspartsdirect 7 лет назад

Thanks for the comment Craig. We're glad we could help!

@ChrisPotterVideo 5 лет назад

Thank you so much for the video. Absolutely perfect. Right down to business and what to check. I replaced the thermal fuse, cleaned all out of lint and we're back in business. Much appreciated!!!!

@jimpimmers5387 6 лет назад

Thank you for the video. I just replaced my two gas valve coils and the dryer works as good as new. $15.00 for the two new coils off Amazon and a little labor on my own part to change out the coils. You save so much money once you learn to take care of these issues on your own.

@youeweu 11 месяцев назад

7 years and still the best explanation, professor Wayne. Too bad Sears no longer exists. I would only add that a good cleaning solved issues with start/stop, incomplete drying and "sensor" dry not working when "timed" did. Cleaning = taking apart, removing/ vacuuming lint from everywhere (including under moisture sensor bars), cleaning bars, sensors and contacts with alcohol wipes (used carb cleaner for high heat one to remove carbon). While you're at it, replace the belt and pulley wheel. If that fails, all components in 2023 are less than $80.

@MJCPeters 6 лет назад

This is the 5th video I watched on the subject, wish I'd have seen this first. This is the best video on this subject.

@AnitaBetterScreenname 3 года назад

I agree! Really wish I started with this video!

@stephenwest5469 6 лет назад

This was a very helpful video. Got my dryer fixed and saved a lot of money.

@jsuttiruttana 6 лет назад

Thank you for very clear instruction! Your procedure helps me troubleshot my Maytag Centennial (MGDC200XW2) dryer, which fail to heat due to the timer unit. Other RU-vid site instruction on how to repair the timer helped me get the dryer back in working order in a weekend. Outstanding!!!! Ooh rah!!!

@badactor3440 2 года назад

Cam you provide a link to the RU-vid video that you saw about the timer repair? Did you have to replace the timer?

@randolphnitz4427 3 года назад

I agree that this is hands down the best dryer troubleshooting and repair video on youtube and I will keep this as a reference for future laundry appliance troubleshooting.

@kesarasao8147 4 года назад

Thank you for the instruction. I didn’t go crazy but ordering the gas valve coil and replaced them the next morning after they got delivered. My Kenmore gas dryer came back to back to life.

@JimTMcDaniels1 2 года назад

*DON'T SKIP THESE STEPS WHENEVER YOU ARE IN THE DRYER, IF YOU'VE REMOVED THE FRONT SIDE(5/6" or 8mm wrench for bolt heads): Be SURE to remove the drum and plain SILICONE SPRAY(not wd40!) both felt seals to the drum, AND oil(motor oil drops, whatever you have) both back drum free wheel rollers and the belt spring roller shafts! Those things will last SO much longer now. I've seen those parts fail badly if you don't. Really great video! Perfect for my 95 whirlpool dryer. It turned out to be the thermal fuse. You said the vent might be clogged. I'll check that but I think my gas flame is set too high because it's too-long much yellow flame tips so I'm gonna adjust that next. Thanks

@gesservice3156 6 лет назад

That was the most helpful video I've seen about gas dryers

@Jefr0w 4 года назад

Absolutely the best video on the subject! I have seen many of these and this is so thorough. Wish I'd found this years ago!!!

@robertbolin8942 2 года назад

Thanks Wayne, Because of your help, I was able to isolate the problem to the thermal cut off fuse. After replacing it, everything works fine. Great troubleshooting tips!

@marcosmota1094 Год назад

I loved Wayne as soon as he said "Hi" - this man inspires confidence! Great video in comparison to all others I've seen on this topic. Also, check the flue, bends, and the external trapdoor. Mine got filled with lint.

@scottboughton3216 5 лет назад

Best troubleshooting dryer video! I love how you covered all. I was stumped on how to access the igniter and learned lots more. Thank you!

@searspartsdirect 5 лет назад

Thanks for the feedback. We're glad to hear that our video helped you.

@daviddeleeuw7164 Год назад

This was a great video with all the sensors logically displayed. I loved both the end-to-end testing along with the testing of the individual sensors. I followed the procedures in the video and my Kenmore H3 is working again after experiencing problems with the gas heat cutting out after a few seconds.

@hootinouts 4 года назад

I've been troubleshooting and repairing my old Sears Kenmore gas dryer for almost 25 years now and I found that the burner valve solenoid coils can become weak over time. When this occurs there is not enough magnetism generated to hold the valve open and it will shut off. Just recently I had the flame ignite, burn for about a half minute, then shut off. I suspected the solenoid coils again; however, I had just replaced these only about five years ago. Turns out that the exhaust vent was completely blocked at the louvers outside the house. I removed the wad from the vent and now my dryer is back in service. Thank God I found this blockage and thanks to the manufacturer designed this machine to have temperature sensors in the dryers internal exhaust duct to monitor the temperature and shut down the machine if they sense a temperature above normal. We typically clean the lint screen; however, I had recently threw a bunch of burlap into the dryer after having washed it and I never experienced more of a mess than what this material made. I cleaned the lint screen and the next time I ran the dryer with normal fabrics in it is when the trouble began. A word of advise: don't run burlap in your machines. If you have the flame got out after a a short time, first check your vent for clogs as I had. You'll save a lot of time and money if that is the root of the problem.

@rickwilliams4995 7 лет назад

This is a great video - I should have started here. Found that wires were burnt open going to operating thermostat after changing more than a few components.

@festeringinfection 5 лет назад

Thank you so much. This guide really does help in troubleshooting gas dryers. I was able to tell my Gas Coil's had failed by watching this video. Replaced the Coils and my Dryer is working perfect once again!

@searspartsdirect 5 лет назад

We're glad to hear that you fixed your dryer and that our video helped. Thanks for letting us know what you found.

@user-tn3km1mx4k 6 месяцев назад

Great video to troubleshoot the issue with my dryer. Saved me a ton of time and money.

@terryphillips6927 5 лет назад

Excellent, precise and easy to follow instructions. I'm off to get the coil thingys

@siamaksadr6708 3 года назад

I watched about 20 videos about gas dryer troubleshooting and this is the best one. Thank you

@unclechuckee619 6 лет назад

This guy is the best! simple instructions that work. Save some money and do it yourself

@victorialowczyk6055 11 месяцев назад

Excellent diagnostic steps, pointed right at the specific fault; love that there was then a separate video link directly in the main video that outlined the steps to replace the Gas Valve Coils! Dryer works fine again!

@mikecavender481 6 лет назад

This video is spot on, took me through the steps.....and boom, it was my Thermal fuse

@stephengutierrez6929 6 лет назад

Thank you! Fixed my girlfriends dryer for just $26. The video led me right to the thermal fuse. I could have ordered the part cheaper online but I wanted the job done quickly. And with a Sears Parts center just a short drive away I decided to pay over the counter instead. This video was a great help!

@searspartsdirect 6 лет назад

Thanks for letting us know what you found (and for buying the part from us). We’re glad to hear that you got the dryer fixed.

@deniseenger3638 Год назад

Most comprehensive repair guide I've ever seen. Well done!

@paulonorato4081 3 года назад

Although it is an old video, it proved very helpful for me. My gas dryer died and the tips shared in the video led me to diagnosing the problem. $24 later for a broken part and my dryer is back up and running. THANKS!

@searspartsdirect 3 года назад

We're glad to hear that you fixed your dryer and that our video helped.

@wyocoyotewyocoyote9007 6 лет назад

Excellent!!!!Nice to have the links to troubleshoot other components. Mines a very different model but bet its the thermal fuse due to a long and poorly designed vent system.

@jameshan360 3 года назад

This is the best video out of all the videos on this topic and helped me fix my dryer at minimal cost.

@chasegj 2 года назад

Thank you so much watched a few videos and no one explained it this thoroughly and simply. Finally found it was my thermal cut off fuse.

@tonyjacob396 3 года назад

great video, ended up replacing the fuse and the dryer is good as new! Many thanks from Kenosha, Wisconsin.

@coreywipper1035 5 лет назад

Best video on this. Another video said if dryer even starts up, it’s not the thermal fuse, thus I went on a goose chase, until finally simply testing the thermal fuse - and found no continuity. Geez Louise.

@searspartsdirect 5 лет назад

Thanks for letting us know what you found. We're glad to hear that you found the cause of the heating problem. Don't forget to check for an exhaust vent system restriction that may have caused the thermal fuse to blow.

@user-uu9in4wq8s Месяц назад

Mine was the hi limit fuse, Probably overheated from vent being clogged up. I ordered all the back fuses for $10.00 from amazon and replaced it in 1 minute. Excellent video!

@gudfrymanzano4405 7 лет назад

Thank you so much for the video info.

@kareno8634 7 лет назад

GREAT JOB Thanks! Liked the Combined 'over all' check for easy elimination. ~ peace

@EdgarIgnacioSilvestrini 2 месяца назад

Amazing step by step video. Very clear, precise and simple explanations. Thank you for taking the time .

@studiowishbone 3 года назад

This video is the best video by far. I love Wayne the “Service Wizard” and the production of this video. It is direct to the point and snappy. It has saved me about $200.

@johnvig8093 10 месяцев назад

Couldn't ask for a better video. It helped me fix my dryer. Thank You!

@mgoodeaux1999 7 лет назад

thank you. watched the video and found the problem almost instantly (blown overtemp fuse). saved some major bucks.

@natashamartin7751 6 лет назад

Madelynne Goodeaux 88l uhuuh joop +

@elnegro146 6 лет назад

best dryer diagnosis video ever. Thanks for taking the time.

@erichoward5565 6 лет назад

Nice simple to the point video. Thanks

@barrybrower9292 2 года назад

Very good video. Well explained. My dryer would start heating and the burner would shut off after 4or5 minutes and make a chattering/squealing sound when it was trying to relight. Turned out to be the coils.I changed them out and now it is back drying clothes again.

@robertcarlson5411 7 лет назад

Thank you very much for his video, While my timer was not the same and I didn't know how to test the line of censors i took them one by one. Mine thermal fuse was bad. Installed a new one for $15 and the dryer is working again

@peteadambialecki7390 Год назад

I love this video. So easy to follow and troubleshoot. Bought my first multi meter and was able to fix it. Easy enough for a noob like myself.

@hestheMaster 3 года назад

👍🏻👍🏻 A logical presentation on dryer troubleshooting!

@philipclarke9565 2 года назад

I agree. This guy is a great teacher and knows his stuff. just wish I had a Sears dryer.

@chris2902010 5 лет назад

He's not playing, get it working and subscribe like he said

@LHR26 5 лет назад

Best video out on the web for trouble shooting, found my issue no problem after testing parts with a multimeter and got it down to thermal fuse.

@rodneyelliott3940 5 лет назад

Hey i wish id found this sooner I had a front load set that died the washer would choke at firsr spin cycle The board fried could see clear The gas drier would run not light The other half was tired of laugndry mat so she found a couple year old set online I changed the mold boot on washer case closed The drier well the new one was electric A problem not really i converted it in less than 4 hours Anyone interested contact me its not hard

@searspartsdirect 5 лет назад

Thanks for letting us know what you found. We're glad to hear that you liked the video and that it helped.

@charlietable2313 Год назад

Wayne you are the Man! If I would of had more teachers like you in school I wouldn't of turned out to be such a dummy. Your explanation was clear, orderly and to the point. Thanks!

@jviews1 2 года назад

Excellent. Best diagnostic video. Was able to watch video and write clear concise troubleshoot instructions. Thank you very much.

@bigalharris Год назад

Best video I've seen on dryer repair. Thank you Wayne! ♥

@jimjohnson6857 2 года назад

Best self fix video on RU-vid!

@markstamidis5387 Год назад

Super helpful video....the graphics are great and Wayne is a great teacher. Workflow makes a lot of sense.

@miiv8353 3 года назад

Wayne , great video clear explanation step by step, I love it. I hope Sears recognised you well.

@bowlerguy426 7 лет назад

Bad thermal fuse. Fixed in a few minutes. Thanks for video.

@ChrisPotterVideo 5 лет назад

Same. Excellent video.

@Saul.Tinoco 5 лет назад

Thank you for posting this video

@DZenitram23 6 лет назад

I love this video I haven't even finished watching it but it thoroughly goes through everything that can go bad n show you how to change it I'm no tech but just a regular average Joe and I fix all my appliances saves money and not that hard thanks for this video and detail of all problems

@searspartsdirect 6 лет назад

Thanks for the positive feedback and encouragement.

@brettpaulakos87 4 года назад

As a Tech of All Trades... Simple and to the point.... Love It...

@ferrellscott 4 года назад

Such a big help. Thanks!! Buying at Sears now 🙂

@jdryyz 3 года назад

Excellent video! Wish I had seen it first before ordering my parts. :)

@joshuavallot8921 2 года назад

great video! thanks for posting. my vent was crushed closed and cause the thermal fuse to blow. your video helped me diagnose and fix

@pafanij926 9 месяцев назад

thorough, concise and helpful Thank you

@jdoucetteguitar 5 лет назад

solid information, clearly explained. Thanks!

@searspartsdirect 5 лет назад

Thanks for the positive feedback. We're glad to hear that you liked the video.

@mikeg8028 6 лет назад

Nice video. I checked all the things mentioned and none of them were my problem. However, the video led me to ultimately figuring out the issue with my dryer (the dryer would run but not heat, and the igniter would not glow). The problem - the heater relay went bad. Easy fix.

@josedalmau130 5 лет назад

Hi Mike.. I'm having the same problem. I checked everything in this video and none of them had an issue. I replaced the ignitor just for good measure. You said in your situation the heater relay went bad. I dont see a heater realy on my dryer, unless you mean the thermal fuse? But that checked out to be ok. Do you have any suggestions?

@callmebackfriday2 4 года назад

Thanks for the video. I love the diagrams. It helps a lot.

@Antzzz_Manzzz 2 года назад

Good lord …we need more great informative videos diy like this

@ZebSmithulon 4 месяца назад

I'm still in the shitter and haven't even made it to the dryer yet, but I really wish I'd have found this video first before the other half dozen that didn't actually explain how anything works and just had some guy randomly poking around with a meter. Update: 15 minutes from start to finish (tools already on hand) I found a bad ignitor. Going to order the parts from your site.

@CHASCO4 7 лет назад

Thank you for your video !!!

@carcoiris00 2 года назад

Awesome video with plenty information. Thank you so much 😊

@bobsaidso123 5 лет назад

Very helpful video. Where I live it would cost at least $150 for a technician to show up at my door. The culprit in my case was the thermal fuse... the part was $22. Thank-You for this video.

@searspartsdirect 5 лет назад

Thanks for letting us know what you found. We're glad to hear that our video was helpful and that you got the dryer fixed.

@andrewp.1556 3 года назад

Thank you for sharing you knowledge with the world.

@jimhanus1910 11 месяцев назад

Had a bad thermal fuse. Thanks for the help!

@ellabelle1277 4 года назад

Wow, excellent video! Thank you sir!

@OKBAOK 5 лет назад

Problem, the igniter doesn't turn on.. First test went ok on this video all parts has continuity. Then I checked the timer switch, NO continuity on the time switch I removed it. Waiting for the parts store to open today.. Will update, sofar so good.🙂

@jimyeager5097 Год назад

You make really great detailed videos. I'm stuck with a built in under-counter dryer I'll need to repair for the next 100 years to prevent removing a beautiful countertop and sink and raising to a much higher height. If you had to guess; what would you say creates a barely audible grinding noise during the gas cycle (like if someone were gargling) while the red hot ignitor is attempting to light? In other words the ignitor is good, so what is broken, but adding noise while the system fails to light? BTW, I believe the ignitor is good, but that leaves out the Flames Sensor, Coil, Thermal fuse, Thermostat, etc...