GE Dryer Won't Start or Run - How to Find the Problem

Подписаться 302 тыс.

Просмотров 63 тыс.

50% 1

In this video, I test & disassemble a newer-style GE dryer that won't start, and show you how to find and test the part thats bad.
Dryer Used in Video: GTD42EASJ0WW
Some items/components on this aren't identical to the older style ones, and some revisions may of taken place between models though.
Links to (some) parts for this style GTD42EAS dryer:
GE Dryer Start Button: bens-appliances.com/products/...
PTS Switch: bens-appliances.com/products/...
89.75" Belt: bens-appliances.com/products/...
GE Belt Switch: bens-appliances.com/products/...
GE Timer Knob: amzn.to/3NBNlSp
Dryer Cleaning Kit: bens-appliances.com/products/...
Timeline of Video:
00:00 - Introduction of Problem on GE Dryer
01:00 - Test #1 - Timer Knob
01:31 - Test #2 - GE Dryer Start Button
01:50 - Test #3 - Dryer Motor Start Windings
02:30 - Dryer Start Button Test 2
02:45 - Test #4 - Voltage & Fuse Tests
04:36 - Console Disassembly
05:18 - Test #5 - How to Test a GE Dryer Push to Start Switch
05:55 - Test #6 - Timer Motor Contacts
06:28 - Test #7 - Resistor Test
06:42 - Dryer Disassembly
08:56 - Idler Pulley Trick & Drum Removal
11:45 - Test #8 - Sensor Tests
13:06 - Test #9 - How to Test a GE Belt Switch
14:02 - Test #10 - How to Test a GE Dryer Door Switch
16:09 - How to Re-Assemble the GE Dryer
Tools I use in all videos can be found at my Amazon Idea Page: www.amazon.com/shop/bensappli...
Did this video help you out? Send me a tip, and help me make more Appliance Repair videos for people to watch for free!
PayPal: paypal.me/BensappliancesYT?lo...
CashApp: $BenjaminSchlichter
Affiliate Disclosure Form: bit.ly/3oXeu3B
** Links to external websites and parts may result in me receiving a commission on sales.

Хобби

Опубликовано:

25 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 109

@brianperkins6121 6 месяцев назад

When testing any device within the dryer in resistance or continuity mode on your meter like the fuse or the start switch, make sure the dryer is uplugged. You do not want to test devices in the dryer circuts in that meter mode with any power present.. use great care when doing testing procedures require the power to be on allways check the mode your meter and make sure its set to measure AC voltage and is not set in continunity mode. when measuring for voltage present .. most of the devices in a dryer can be tested in resistance or contunity mode with the dryer unpluged.. (dont just turn the breaker off , unplug it) Some of the edges of the metal cabinet are very sharp take precauations to not cut yourself ..

@davidgaboury2400 Месяц назад

This video is spot on, saved me the cost of buying a new dryer! I followed the diagnostic and found the thermal high limit to be defective. I also tested all components to be sure they were working correctly. 12 bucks to replace high limit fuse/sensor. 12 dollars fixed my dryer and I was able to avoid forking out 500.00 or more to replace my dryer. Ben does a great job with this video and made this very easy to follow. Thank you Ben, I appreciate you sharing your knowledge and allowing folks like me to benefit from your willingness to post the most comprehensive information I have found on this subject in all of RU-vid!

@psulionz87 День назад

My guy! my apt complex maintenance is so slow and lazy that i was able to troubleshoot my dryer myself with your help

@bensappliancesandjunk День назад

Nice!

@GREENDIAMONDNEWS2012 4 месяца назад

stuck tooth pick in switch hole 3 or 4 times-I saw a teeny tiny bit of black lint, BINGO- two minute fix, God bless you for your work.

@robertdobson2846 2 месяца назад

This dryer is identical to one handed down to us Easter weekend. My wife used it one day and it stopped working. I watched this video 4 days ago, in some parts repeatedly, to dismantle and diagnose my dryer. You make it too easy. My issue was the high-limit thermostat. I ordered it along with 2 new light bulbs, a set of glide slides (mine were all worn and/or broken), and a small dryer cleaning kit on Amazon for less than $40. I cleaned it out then reassembled it. I admit, I did have to rewatch the part where you took off the belt so I knew how it went back on. You saved me probably hundreds of dollars. Thanks!

@jimgregg4201 Месяц назад

The Best audio/video and clear concise explanations of everything!!

@ramonlongoria69 25 дней назад

Spinning the drum worked for me, thank you sir looked at all repair videos nobody mentioned this one ,yours pop up last and it was amazing

@AndrewAspiringGamer 2 месяца назад

My dryer works now and all I needed was a new belt. Saved us a ton. Thank you!

@bensappliancesandjunk 2 месяца назад

Nice!

@dgamada23 2 месяца назад

Thank you for taking the time out of your day to show us how to do this! I was able to replace my dryer's belt using your video. Keep up the great work.

@Moneymyke357 6 дней назад

Start windings going bad but I know now thanks to you. Appreciate that

@Coucho 6 месяцев назад

Just wanted to say I love your content-- I've learned a lot. Thanks for posting.

@bensappliancesandjunk 6 месяцев назад

Thanks!

@Pooroljc 6 месяцев назад

THANK YOU for taking so much time to make these detailed video's.

@bensappliancesandjunk 6 месяцев назад

Glad you like them!

@Thug1605 Месяц назад

Within a couple of minutes, I fixed mine. It was just the button on mine. Got lucky. Thanks to the video

@juniorm.29 10 дней назад

Thank you i found my problem in the first minutes of the video... The timer knob is cracked and was stuck of off -_- thx a lot buddy now I don't have to call a repair guy

@johnathanrucker6275 Месяц назад

You’re videos really helped me save a ton of money

@darianbrantley1539 2 месяца назад

It was my power button thanks man. This video got down to many details save you money.

@newman9555 3 месяца назад

Thank you Ben...I reset my timer knob and also my start switch was pressed in too far...God bless you Sir...🙏

@Wiglady12 2 месяца назад

This was so helpful. I have this model and all of a sudden my start button wouldn't respond. Removing the starter button and pressing the starter switch solved my problem. Thanks for posting!

@appliancerepairamerican 6 месяцев назад

Excellent, as always Ben. Thank you for sharing

@user-zv3gk7hn8w 5 месяцев назад

after replacing the ignitor and coils on my GE gas dryer, the thing wouldn't start back up. so i had to take it all apart again. it wasn't until the final test outlined in the video that i found the culprit--the infernal door switch. the INCREDIBLY poor design made the contacts not line up with the connector when i was putting the machine back together after the initial repair. the contacts on the switch are paper thin prongs which are easily pushed aside by the wire harness if you're not careful while reconnecting. thank you, Ben.

@user-ph3ps7px3o 5 месяцев назад

Excellent video...very detailed. Thanks for helping me fix my dryer!!!!!!!!!!!

@tonyb1887 Месяц назад

Your video saved me so much stress and likely a lot of money. The issue turned out to be a jammed start button lol. Great video! Cheers!

@bensappliancesandjunk Месяц назад

Nice glad it helped!

@watkinsguy 6 месяцев назад

Love your videos, super helpful and informative!

@bensappliancesandjunk 6 месяцев назад

Thanks!

@lonniealbury6897 4 месяца назад

Thanks I wiggled the plug and it started working. will take the outlet apart later and check it. Thanks for the info!!

@cpetty9144 5 месяцев назад

Thank you for this video! I walked through everything with you and found out that my door switch wasn’t connected to the three wires 😂🙄

@ryanwalker3365 2 месяца назад

As simple as a cracked timing dial. Thank you, Ben!

@bensappliancesandjunk 2 месяца назад

Happy to help!

@juevesscrew Месяц назад

Thank you so much. Mine problem found in your video . Was the starter button. I fixed it thanks to you 😊

@MikeSnedaker 3 месяца назад

Awesome, thanks. My door was bent not depressing the safety sensor enough to start. I just bent the door a bit and now it engages that sensor enough for it to start.

@AS-TIGTV 3 месяца назад

Thanks for your help brother..You're the best and I will highly recommend your channel..my dryer now is perfectly working properly.

@estebanperez9493 Месяц назад

Este video me ayudo a reparar mi secadora y no tener que comprar otra. No tengo experiencia reparando eletrodomésticos pero seguí las instrucciones paso a paso y encontré el problema en el selector de tiempo de secado. Ahorré $1000 dolares. Muchas gracias por compartir este tutorial.

@DanOKC 2 месяца назад

Ben's the BEST ................ Thank You for all you share. Sorry, I had to add the video is just not the same with your Maytag outfit, hope they didn't give your grief over it.

@roysaenz5738 Месяц назад

Great video and you explain it very well.

@RC_Club17 22 дня назад

Thank you sir 🙏 you are a godsend! My dryer now works it was the knob like you have said!!!

@peteyc2292 6 месяцев назад

Ben You might want to advise to unplug the unit before removing the back plate. Just in case they lose their grip on it and drop it onto the terminals. Unlikely, but better safe than sorry. Love your videos by the way.

@jessemickle6451 5 месяцев назад

I TOTALLY forgot to unplug and dropped… 🤦🏼‍♀️ so I made a spark… now I think I have to fix another one my wires…

@msteetee 5 месяцев назад

Thankyou for this video. My problem was the start button… I removed button cover pushed start and it worked. So I’m leaving it off lol

@rosamorrissette8285 5 месяцев назад

Where is the thermal fuse located on the GE Model GTD42EASJ2WW?

@Worldtravelerbychoice 2 месяца назад

Thanks to you..fixed my dryer today😊

@bensappliancesandjunk 2 месяца назад

Great 👍

@alexescobar5707 5 месяцев назад

It was the cracked knob, use pliers and turned back on. Thank you so much.

@padilla7019 2 месяца назад

Very clear explanation

@godsblade300S 6 месяцев назад

😜✌️ Nice internal camera action Brother, very helpful 😁 God Bless us All 🇺🇸🙏✝️

@bensappliancesandjunk 6 месяцев назад

Those shots are always the worst to do, but the most needed. If I ever do a video with a dryer idler pulley, its always the most-viewed segment, always. Hopefully the shots take the mystery out of those darn things.

@PatriotCoder 6 месяцев назад

I replaced the timer on my GE dryer yesterday. Cost $100 but that's after 8 years of service. I'll be happy if it lasts another 3 years. 4:47 🤞

@bensappliancesandjunk 6 месяцев назад

The one in the video is a 2016 model. So 6 years and just a $15 door switch. Not a bad deal. Their dryers aren't too bad

@jacobstubbs7395 3 месяца назад

Was the light coming on when you opened the door?

@Nick_G37 День назад

is the timer the rotating switch that says time dry? mine is seems not calibrated any more it does not like progress when running or it does not run at all. maybe it is indeed the point of failure do you have a part number?

@katespencer4038 6 месяцев назад

I watch your videos even though you may not work on my particular brand just in case i happen to get another brand appliance in the future. Although i do think my future appliances may be used

@bensappliancesandjunk 6 месяцев назад

I RARELY work on GE's, but the issue here being is that literally only 1 company has videos on these, and thats it. So unless you know whats bad and needs fixed, thats all you got. So I figured I'd correct that.

@timothyjohnson254 4 месяца назад

Thank you for the video! It was very useful in trying to diagnose my dryer on my own. Unfortunately I couldn't find my issue. Could you give me a hint? I have a GE GTD42EASJWW that won't even attempt to start when I press the power button. But when I tested the start button for ohm's, the start button worked perfectly (the dryer still didn't start, though). I took the top and front off and found now obstructions and the dryer belt was in good condition. Any hints would be helpful, thank you!

@justnopinion6248 Месяц назад

Thank you, Ben! We haven't had this dryer long, and now it isn't work. 🤦🏽‍♀️

@thefinesseexperience5994 Месяц назад

Right on point!

@Nick_G37 День назад

howdy. I have the exact same dryer and it seems that the drying cycles button (rotating switch is not longer calibareted. When i turn it on it does not move and sometimes it does not turn on all . Also when i manager to make it start it does start where the "off" indications are. I tried to remove the ratating switch which does not seem to be damaged but it does not make a difference. DO yuo think that switch is the culpit and needs to be replaced? thanks for input

@bobbyharper2958 3 месяца назад

Thank you so much ,

@Eliteroller 8 дней назад

Thank you!

@steviev8273 6 месяцев назад

That was a great teardown! I can’t find the link for the dryer cleaning kit you used.

@bensappliancesandjunk 6 месяцев назад

My apologies, here it is: bens-appliances.com/products/appliance-cleaning-kit-for-refrigerators-and-dryers

@robertwomack5166 14 дней назад

Mr.Ben I have a GE dryer the belt was broke I replaced the belt after putting it back together I tried to start it wouldn't do anything after checking I found it will only start in extended tumble what do I need to look at I was thinking timer I replaced it but has same issue.

@erickrivera4910 4 месяца назад

Thank you, I just found my dryers issues, a broken belt.

@bensappliancesandjunk 4 месяца назад

nice!

@skyscraper37 6 месяцев назад

My ge profile dryer is 22 years old and is remarkably similar to this one inside. The one difference is the door harness has individual wire terminals and not a block plug. I’ve had to solder a new terminal on it.

@bensappliancesandjunk 6 месяцев назад

They haven't changed them much at all, just like many Whirlpools out there. And you are 100% right. The door harness was way better designed on the older GE's since each wire can be removed. This door switch is identical to a Samsung or Whirlpool switch, other than how the harness attaches.

@user-zq3eu9fy7x 2 дня назад

What if the black piece that the timer knob attaches to broke off? Is there a piece for that. I went ahead and bought the timer knob but a little piece broke off

@sjustice1989 3 месяца назад

Thanks

@chuck889 5 месяцев назад

My dryer looks like that in the back and I'm trying to locate the thermal fuse. I see yours was in the that cut out in the back lower, but mine isn't there. Do I have to take the back off to access the thermal fuse? Thanks

@timkelsey5455 3 месяца назад

I can’t find mine either ???

@KingPetty901 5 месяцев назад

fix my dryer in 15 seconds took my longer to comment thank you

@Niae4302 Месяц назад

My timer knob is very hard to turn(not broken) and for example i put in on the 20min setting it jumps back to off, it won't turn on. Does this mean the timer needs replacing

@markshaver 6 месяцев назад

Hmmm no hat- who are you and what have you done with Ben?- very informative videos keep them coming,

@victorcervantes7998 4 месяца назад

What size belt?

@mikehackenschmidt8765 6 месяцев назад

Number 1 problem on that dryer is the timer knob cracking.

@douglaskosarek3027 Месяц назад

I need help , i have exact model ,switch was broken i pushed and worked then switch fell inside and arcked

@gfz1970 5 месяцев назад

Do you happen to have any information on this model: GTD65EBSJ4WS

@bensappliancesandjunk 5 месяцев назад

Should be very similar to this other than the display/control board. I will make a video on it though when I have one handy

@justnopinion6248 Месяц назад

Ben, 😊do you still have a shop in town?

@bensappliancesandjunk Месяц назад

in Circleville, yes

@kkatanik1218 5 месяцев назад

I have this exact same dryer and only had it for about 4 months. Out of nowhere it's no longer heating. Drum moves, vent is clean both outside and near the back of dryer. Any suggestions

@bensappliancesandjunk 5 месяцев назад

I made a video on how to check everything involving heating. If its only 4mo old, it should be under warranty.

@tonezuni1195 4 месяца назад

Could the resistor by the timer make dryer not turn on I tested for continuity and got nothing and I ohm it out and was not in range

@bensappliancesandjunk 4 месяца назад

I can't remember offhand what is in the line of that resistor is, if its heat or the motor, but if its off spec from the schematic, it definitely needs replaced.

@BUTLERNIXON 7 дней назад

my timer knob is cracked and no clicking sound when turning. but tried to turn with pliers but won't turn. Should it turn with pliers?

@bensappliancesandjunk 7 дней назад

Should yes

@BUTLERNIXON 5 дней назад

@@bensappliancesandjunk Yes. I finally got it to move and dryer is working. Ordered timer. Many thanks.

@BUTLERNIXON 2 дня назад

New timer put on and solved the no power issue.

@IbnFalastin 5 дней назад

Mine was thermal high limit switch $20

@1969meka 4 месяца назад

After 2years realized the timer knob cracked 🤦‍♂️… thks

@tashi9461 6 месяцев назад

You looks very different without may tag cap and dress 😂😅

@greatscott3663 6 месяцев назад

Thanks for the videos. Where is your outfit?

@bensappliancesandjunk 6 месяцев назад

Being washed at the moment

@greatscott3663 6 месяцев назад

@@bensappliancesandjunk Thanks. I really appreciate your videos.

@rodjones4005 5 месяцев назад

My GE dryer won't turn on. No lights or anything on the control panel. Getting power from socket and to the wiring block of the dryer. My model doesn't have the fuse. Anyone run jnto this issue??

@bensappliancesandjunk 5 месяцев назад

If it has a boars you'd want to trace electric to the boards power and confirm its getting 120vac. If it is, board is likely bad

@rodjones4005 5 месяцев назад

@bensappliancesandjunk thank you for the quick response. One last question, what do I need to test on the board?

@bensappliancesandjunk 5 месяцев назад

@rodjones4005 input voltage to board. You want to make sure its getting the right voltage to power it on. Usually it's 120vac but if there's any other boards prior to the main UI it could be different. Check the schematic to confirm

@rodjones4005 5 месяцев назад

@@bensappliancesandjunk ok, thank you again.

@atbecmda 6 месяцев назад

I liked you better with a cap)) 😆

@youdontknowme5969 6 месяцев назад

17:39 LOL

@bensappliancesandjunk 6 месяцев назад

Its absolutely insane that GE has that cover in the way it exists... You shouldn't have to hold it with one hand so it doesn't snap and slash me

@youdontknowme5969 6 месяцев назад

It reminded me of a mechanic I follow LOL. He hates those "stupid plastic beauty covers" that manufacturers install over engines

@bensappliancesandjunk 6 месяцев назад

@@youdontknowme5969 what kills me is I've never seen any brand do something like this. It could of been a simple plastic sheet that could be rolled away. Or there's the metal cover on the switch itself.... Doesnt make sense.