@@1for4ll so I’m assuming the reason why the value didn’t show at first is just because I needed to scrape the contacts clean with the screw driver? I had issues with the lid staying locked after this too… do you have any suggestions on how to bypass the lid lock?
@@jasonfiz01something is broken inside the latch holding the door lock .So the spring cant pull back the latch.send me the video i will help u fix it in second
@@jasonfiz01 use papper sand gently to clean the connector and spring as well.You cannot bypass the lock because it read by system..dont bypass the cord it cause the board short circuit.U can use the machine eventho without lidlock but after 3 times of cycles it will be error again.
There are contacts in there take it apart clean them put it back together and now you have words to this guys video your welcome from Huffs Appliance 😁or he is bypassing the locking mechanism with the spring hard to see exactly what he is doing there isn't much light
Teknisimu, if I did your stretching of the spring, and still get no continuity between that spade connector and the metal piece on the far side of the copper winiding, is the winding the problem (broken)?
My lid locked light is flashing too only this happened before on around Feb of this year. I still had a warranty so a g.e repairman came out and it took him all of 5 seconds to fix the issue. He said it was some computer error saying the lid was locked but it wasn't. I have no idea how he reset it or what he did to fix it but it's happening again and I'm no longer under warranty. So idk what to do. He told me before it wasn't a bad lid lock
@@1for4ll Unfortunately I don't think I can bypass the lid lock because my machine has a purple wire that goes with the two hot wires and it's called a "solenoid" or something and even tho we spliced the hot wires and put them together, it still throws an error at the end of the wash cycle so it won't go into rinse and spin. It's a g.e. gtw330ask3ww
@@sleepy5017 oh it's different model but same part i think there are 3 core wire yellow and red for the solenoid lid lock and violet for the sensor to main board
@@sleepy5017 yes you can't put red and yellow together its can short circuit your board.yes true that cycle wont finish after 3 times of cycles if the sensor of door doesnt cut off the relay that connect wire red to solenoid
Nothing to hide actually it was little bit cold the weather at here and i realised the video wasnt clear enough because of my gloves.I 'll make another clear
The weirdest comment ever. Most people work with gloves for safety. Anything could prick a persons fingers at anytime You must have a HAND FETISH & wanted to see his hands because honestly we’re just here to get help with the washer not worry about how someone’s hands look 🤣🤣
I've got the exact same washer. It's the worst purchase decision I ever made. I will never buy another GE product. Shame, it used to be a quality company.
This does nothing for somebody that's never worked on one. When there's no talking explaining what you're even doing. If you would like some tips on getting your video seen by more people and. Showing up in search wiwhen somebody searches for something like this. Please feel free to reach out and I can give you some pointers
