Тёмный

Gear Knob and Gaiter Removal and Refitting - Nissan Micra K12 

ScrewsNutsAndBolts
Подписаться 112 тыс.
Просмотров 11 тыс.
50% 1

Removing and Refitting the gear stick knob and gaiter on a Nissan Micra K12 from years 2003 to 2010. Thanks for watching. Please comment, like and subscribe !.
All of my uploaded material is protected under copyright law. None of my videos may be re-uploaded, reproduced or transmitted, in part or in full, in any form or by any means, without the written permission of the copyright holder.
© / screwsnutsandbolts 2023
Read important information below:
Disclaimer:
My videos are a guide to making repairs and also to provide helpful information.
Do not attempt to make any repairs unless you’re sure you know what you’re doing. For more detailed information, if something is not clear to you, or you don't understand something, have the repair carried out by a qualified mechanic or at your local car dealer. Any repair you carry out on your car you do at your own risk.
Under no circumstances will Screwsnutsandbolts be responsible or liable in any way for any content, including but not limited to, any errors or omissions in the content, or for any loss or damage of any kind incurred as a result of any content communicated in this video, whether by Screwsnutsandbolts or a third party. In no event shall Screwsnutsandbolts be liable for any special, indirect or consequential damages or any damages whatsoever resulting from loss of use, data or profits arising out of or in connection with the availability, use or performance of any information communicated in this video. Due to factors beyond the control of Screwsnutsandbolts, it cannot guarantee against improper use or unauthorized modifications of this information. Screwsnutsandbolts assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Screwsnutsandbolts recommends safe practices when performing any do it yourself repairs and or with tools seen or implied in this video. Due to factors beyond the control of Screwsnutsandbolts, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Screwsnutsandbolts.

Авто/Мото

Опубликовано:

 

23 май 2023

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 22   
@mattias8893
@mattias8893 Год назад
thx for your amazing work🙏
@screwsnutsandbolts
@screwsnutsandbolts Год назад
Thanks for watching !
@hx4zx
@hx4zx Год назад
So useful! My Gaiter seems to be always popping out (gear change from 1-2 is always so stiff so not sure if it's on its way out) so I have to maintain and keep clicking it back in. Thanks!
@screwsnutsandbolts
@screwsnutsandbolts Год назад
You're welcome :)
@giuseppedavi7229
@giuseppedavi7229 6 месяцев назад
I’ve got a k12 when i put it in 3th gear i hear a grinding noise same whit the 4th what could it be?
@screwsnutsandbolts
@screwsnutsandbolts 6 месяцев назад
There could be a few different reasons. Check this link: www.mistertransmission.com/noises-when-shifting/
@jeanclaude1027
@jeanclaude1027 Год назад
Hi, reverse light not working, what could be the possible cause except of bulb and fuse?
@screwsnutsandbolts
@screwsnutsandbolts Год назад
It could be a faulty reverse light switch: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-n1POKC4RxSA.html
@amigachris
@amigachris Год назад
if your rear wiper comes on in reverse (with wipers on) it's probably not the switch.
@bender22222
@bender22222 10 месяцев назад
Can you remove from stick that white inner part? I'd like to put other universal knob because I don't like original one.
@screwsnutsandbolts
@screwsnutsandbolts 10 месяцев назад
I think it's glued on so you'd probably have to break it off
@bender22222
@bender22222 10 месяцев назад
ok thanks@@screwsnutsandbolts
@Playbros04
@Playbros04 6 месяцев назад
Hey @bender22222 did you try breaking it ? I want to change it to a universal too but I’m not sure if under the white thing it’s a screw like base or just metal
@rethabilekhotseng3232
@rethabilekhotseng3232 10 месяцев назад
How do I replace a new gear shifter on automatic transmission, the car is Nissan march K12
@screwsnutsandbolts
@screwsnutsandbolts 10 месяцев назад
I don't know, I've never worked on an automatic, sorry.
@yfaheem7557
@yfaheem7557 6 месяцев назад
The manual gear shift has suddenly gone very hard and taking lot of force for neutral to 1st. It started happening from last few days when outside temperature is touching 0C. Can you help what may be causing problem in the gear of my nissan micra K12 and how I can fix? thanks.
@screwsnutsandbolts
@screwsnutsandbolts 6 месяцев назад
It might be worth changing the gearbox oil. It's also possible you have air in the clutch fluid so the clutch may not be disengaging fully and you may need to bleed the system.
@yfaheem7557
@yfaheem7557 6 месяцев назад
@@screwsnutsandbolts thats right. I took it to the workshop and there was air entrapped which they bleed out. Its fine now. DO you have any video how to change gear box oil? Thanks.
@screwsnutsandbolts
@screwsnutsandbolts 6 месяцев назад
Yes, here: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-0wfNRjdeh18.html
@yfaheem7557
@yfaheem7557 6 месяцев назад
Something gone wrong. The break fluid reservoir shows contamination. the colour of oil is dark and this was the problem left unseen from my recent clutch service. I am not sure how this could have happened. Can you answer this?
@yfaheem7557
@yfaheem7557 6 месяцев назад
@@screwsnutsandbolts The clutch has gone bad again after service unfortunately. The mechanic said the break/clutch oil is dirty and mixing up with contamination. He said he cleaned all breaks lines and bleeded the system but it keeps coming back. I could see murky colour of the break fluid in the reservoir and was quite upset with the mechanic. As it was never like this before clutch service. I think I have to do something myself. can you advise what to check? I am stuck and dont know if replacing master cylinder will help? thank you for your guidance.
Далее
Stereo Unit Removal and Refitting - Nissan Micra K12
16:50
Thermostat Removal and Refitting - Nissan Micra K12
16:56
когда повзрослела // EVA mash
00:40
Просмотров 886 тыс.
Change Gear Knob Duster
4:08
Просмотров 81 тыс.
Instrument Cluster Removal - Nissan Micra K12
12:02
Просмотров 17 тыс.
Nissan Micra 2013 spark plug change in detail, k13
6:09
Headlight Removal and Refitting - Nissan Micra K12
9:00
nissan juke 1.6 manual gearknob shift removal solved
5:17
Самое идиотское ДТП года
0:13
Просмотров 373 тыс.