I still use my Gen 1 Aegis Legend been going strong after 4 years i actually have a limited edition the aluminum part is a really nice Sapphire Blue color ive owned many different mods but i keep going back to my Aegis it really is a Legend of a mod
If you’re referring to the numbers on the display, there are a couple of basic tenants to using these types of devices, and I will try to explain them briefly. The big number is your wattage. What you set your wattage on depends on the ohms of the coil that you’re using. You’ll notice on the screen a smaller number that has an ohms symbol next to it. That is the ohms of your coil. You need to set your wattage based on the ohms of your coil. The easiest way to do this, is to look at the coil that you’ve put in there and on the side of it, or if it’s a pod system, usually underneath it, it should tell you what the ohms are and what the wattage range is. Basically, if you have your wattage too high, You will burn the cotton wick in your coil. And if it’s too low, you will get no vapor production. Typically there is a wattage range for any given ohm rating. Usually anything under one ohm, like 0.46, should not be over 20 W. These days most companies will put a wattage range either on the coil or on the package that the coil comes from. Also, within those ranges at the lower end, you’ll get less vapor and less flavor at the higher and you’ll get more vapor and more flavor, but it uses more liquid. You know what I mean, it consumes more liquid. If this is your first adjustable wattage device, you might want to do a little bit of reading up on it. They are subtlety and nuances to using them. Thanks for watching! 😃👍🏻
Thx Tony. Not for me but are these coils zeus compatible? I'm more into boro scene mainly atm. Waiting on a boro from Imporium mods the naro 60. You have a few mods from Johndon I believe
I've had my Legend 2 for just over 2 years and I love it, that manual locking switch on the side comes in handy when I want to lock it quickly, this one looks pretty cool but honestly I prefer that manual locking switch, great review as always Tony and I hope you have a great weekend.
I just tested that and the one I have does not. Could be because this is a sample / pre-production model, but I also don't see that in the manual. Hope that helps! Thanks for watching! 😃👍🏻
